Convert Dry Quarts (US) to Cubic Meters
Dry Quart (US) (qt) to Cubic Meter (m³) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 qt = 0.0011012209 m³
1 Dry Quart (US) = 0.0011012209 Cubic Meters
1 Cubic Meter = 908.08298 Dry Quarts (US)
1 qt in every supported unit
Conversion chart: Dry Quart (US) to Cubic Meters
Conversion table
| Dry Quart (US) (qt) | Cubic Meter (m³) |
|---|---|
| 0.01 qt | 1.10122E-05 m³ |
| 0.1 qt | 0.00011012209 m³ |
| 1 qt | 0.0011012209 m³ |
| 2 qt | 0.0022024419 m³ |
| 3 qt | 0.0033036628 m³ |
| 5 qt | 0.0055061047 m³ |
| 10 qt | 0.011012209 m³ |
| 20 qt | 0.022024419 m³ |
| 50 qt | 0.055061047 m³ |
| 100 qt | 0.11012209 m³ |
| 1000 qt | 1.1012209 m³ |
Dry Quart (US) (qt)
Definition: A US customary dry-measure unit equal to one thirty-second of a US bushel, or exactly 1.1012209428 liters — about 16% larger than the US liquid quart of the same name.
History: Grew out of the same English Winchester dry-measure system as the bushel and peck; because dry goods were traditionally measured by heaped volume rather than a sealed liquid container, the dry quart was defined separately from the liquid quart even though both share the same name.
Current use: Commonly seen at US farm stands and grocery stores as the sizing for berry and produce containers, e.g. "a quart of strawberries."
Cubic Meter (m³)
Definition: The SI derived unit of volume, equal to the space occupied by a cube one meter on each side — exactly 1,000 liters.
History: Defined directly from the meter once that base unit was standardized in the 1790s French metric reform, giving science and engineering a coherent volume unit tied to the same decimal system as length.
Current use: Used for large-scale volume measurement such as shipping containers, concrete pours, warehouse storage, and bulk grain silo capacity in metric countries.
Supported Units
| Unit | Symbol | In Liters |
|---|---|---|
| Liter | L | 1 L |
| Cubic Meter | m³ | 1000 L |
| Cubic Foot | ft³ | 28.316847 L |
| Peck (US) | pk | 8.8097675 L |
| Peck (UK) | pk | 9.09218 L |
| Bushel (US) | bu | 35.23907 L |
| Bushel (UK) | bu | 36.36872 L |
| Dry Quart (US) | qt | 1.1012209 L |
| Dry Pint (US) | pt | 0.55061047 L |
About These Parameters
- Value
- The quantity of dry goods you want to convert, expressed in the "From" unit. Accepts decimals — useful for fractional bushels or pecks.
- From Unit
- The dry-measure or metric volume unit your input value is currently measured in, such as bushels, pecks, or liters.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Dry Volume Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the liter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Dry Quart (US) → Cubic Meter: multiply by 0.0011012209. For example, 1 qt × 0.0011012209 = 0.0011012209 m³.
Why Dry and Liquid Measure Differ
A US dry quart (1.101 L) is about 16% larger than a US liquid quart (0.946 L), even though both are called "quart" — the same is true of the dry pint versus the liquid pint. This split traces back to how each was originally measured: liquids were sold by a sealed container filled to a fixed level, while dry goods like grain, apples, and berries were traditionally sold "heaped" — piled above the rim of an open measure — so the dry-measure system needed its own, separately standardized set of volumes even though English speakers reused the same unit names for both.
US vs. UK Bushels and Pecks
The US bushel (35.239 L) and the British imperial bushel (36.369 L) are not the same size — about a 3% difference — because the two countries standardized their dry-measure systems at different times. The US bushel descends from the older English Winchester measure that colonial settlers carried across the Atlantic, while Britain later redefined its own bushel and peck under the Weights and Measures Act of 1824, based on the imperial gallon. The US never adopted that later British redefinition, so American and British/Commonwealth bushels have quietly diverged ever since.
Example
1 qt equals 0.0011012209 m³. For scale, a standard bushel of corn is about that same 32 qt of volume (and weighs roughly 56 lb / 25.4 kg) — so this value is about 0.03× a bushel of corn by volume.
Frequently Asked Questions
How many Cubic Meters are in 1 Dry Quart (US)?
1 Dry Quart (US) (qt) equals exactly 0.0011012209 Cubic Meters (m³).
Is a dry quart the same as a liquid quart?
No. A US dry quart is 1.1012209428 liters, while a US liquid quart is 0.946352946 liters — about 16% smaller. They share a name because both trace back to English measuring traditions, but they were standardized on separate physical containers, so they should never be treated as interchangeable.
Why do farmers still use bushels?
US grain markets, contracts, and price quotes (for example, corn and wheat futures on the Chicago Board of Trade) were built around the bushel long before metric units became common, and that infrastructure is deeply embedded in agricultural pricing, storage, and logistics — converting the entire industry's unit of account to metric would be far more disruptive than simply converting bushels to other units when needed, which this page does instantly.
How accurate are these conversions?
Every conversion factor used here is the exact, standardized value for that unit (for example, 1 US bushel = exactly 35.2390701696 liters by the US customary definition) — results are limited only by floating-point display precision, not by rounded conversion constants.