Convert Pecks (UK) to Cubic Feet
Peck (UK) (pk) to Cubic Foot (ft³) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 pk = 0.32108731 ft³
1 Peck (UK) = 0.32108731 Cubic Feet
1 Cubic Foot = 3.1144177 Pecks (UK)
1 pk in every supported unit
Conversion chart: Peck (UK) to Cubic Feet
Conversion table
| Peck (UK) (pk) | Cubic Foot (ft³) |
|---|---|
| 0.01 pk | 0.0032108731 ft³ |
| 0.1 pk | 0.032108731 ft³ |
| 1 pk | 0.32108731 ft³ |
| 2 pk | 0.64217461 ft³ |
| 3 pk | 0.96326192 ft³ |
| 5 pk | 1.6054365 ft³ |
| 10 pk | 3.2108731 ft³ |
| 20 pk | 6.4217461 ft³ |
| 50 pk | 16.054365 ft³ |
| 100 pk | 32.108731 ft³ |
| 1000 pk | 321.08731 ft³ |
Peck (UK) (pk)
Definition: An imperial dry-measure unit equal to a quarter of an imperial bushel, or exactly 9.09218 liters — larger than its US counterpart.
History: Part of the British imperial system formalized by the Weights and Measures Act of 1824, which redefined the bushel and its subdivisions on the imperial gallon rather than the older Winchester standard the US kept.
Current use: Now largely historical in everyday UK commerce, though the term survives in older agricultural records, recipes, and the idiom "a peck of trouble."
Cubic Foot (ft³)
Definition: Equal to the volume of a cube one foot on each side, or exactly 28.316846592 liters, derived from the internationally agreed foot (0.3048 m).
History: A natural extension of the imperial foot into three dimensions, used in English-speaking countries since the foot itself was standardized; it became especially common in 20th-century US building and landscaping trades.
Current use: Widely used in the US for soil, mulch, compost, and potting-mix volume at garden centers, as well as for shipping and produce-crate capacity.
Supported Units
| Unit | Symbol | In Liters |
|---|---|---|
| Liter | L | 1 L |
| Cubic Meter | m³ | 1000 L |
| Cubic Foot | ft³ | 28.316847 L |
| Peck (US) | pk | 8.8097675 L |
| Peck (UK) | pk | 9.09218 L |
| Bushel (US) | bu | 35.23907 L |
| Bushel (UK) | bu | 36.36872 L |
| Dry Quart (US) | qt | 1.1012209 L |
| Dry Pint (US) | pt | 0.55061047 L |
About These Parameters
- Value
- The quantity of dry goods you want to convert, expressed in the "From" unit. Accepts decimals — useful for fractional bushels or pecks.
- From Unit
- The dry-measure or metric volume unit your input value is currently measured in, such as bushels, pecks, or liters.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Dry Volume Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the liter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Peck (UK) → Cubic Foot: multiply by 0.32108731. For example, 1 pk × 0.32108731 = 0.32108731 ft³.
Why Dry and Liquid Measure Differ
A US dry quart (1.101 L) is about 16% larger than a US liquid quart (0.946 L), even though both are called "quart" — the same is true of the dry pint versus the liquid pint. This split traces back to how each was originally measured: liquids were sold by a sealed container filled to a fixed level, while dry goods like grain, apples, and berries were traditionally sold "heaped" — piled above the rim of an open measure — so the dry-measure system needed its own, separately standardized set of volumes even though English speakers reused the same unit names for both.
US vs. UK Bushels and Pecks
The US bushel (35.239 L) and the British imperial bushel (36.369 L) are not the same size — about a 3% difference — because the two countries standardized their dry-measure systems at different times. The US bushel descends from the older English Winchester measure that colonial settlers carried across the Atlantic, while Britain later redefined its own bushel and peck under the Weights and Measures Act of 1824, based on the imperial gallon. The US never adopted that later British redefinition, so American and British/Commonwealth bushels have quietly diverged ever since.
Example
1 pk equals 0.32108731 ft³. For scale, a standard bushel of corn is about that same 3.8757559 pk of volume (and weighs roughly 56 lb / 25.4 kg) — so this value is about 0.26× a bushel of corn by volume.
Frequently Asked Questions
How many Cubic Feet are in 1 Peck (UK)?
1 Peck (UK) (pk) equals exactly 0.32108731 Cubic Feet (ft³).
Is a dry quart the same as a liquid quart?
No. A US dry quart is 1.1012209428 liters, while a US liquid quart is 0.946352946 liters — about 16% smaller. They share a name because both trace back to English measuring traditions, but they were standardized on separate physical containers, so they should never be treated as interchangeable.
Why do farmers still use bushels?
US grain markets, contracts, and price quotes (for example, corn and wheat futures on the Chicago Board of Trade) were built around the bushel long before metric units became common, and that infrastructure is deeply embedded in agricultural pricing, storage, and logistics — converting the entire industry's unit of account to metric would be far more disruptive than simply converting bushels to other units when needed, which this page does instantly.
How accurate are these conversions?
Every conversion factor used here is the exact, standardized value for that unit (for example, 1 US bushel = exactly 35.2390701696 liters by the US customary definition) — results are limited only by floating-point display precision, not by rounded conversion constants.