Convert Pecks (US) to Cubic Meters
Peck (US) (pk) to Cubic Meter (m³) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 pk = 0.0088097675 m³
1 Peck (US) = 0.0088097675 Cubic Meters
1 Cubic Meter = 113.51037 Pecks (US)
1 pk in every supported unit
Conversion chart: Peck (US) to Cubic Meters
Conversion table
| Peck (US) (pk) | Cubic Meter (m³) |
|---|---|
| 0.01 pk | 8.80977E-05 m³ |
| 0.1 pk | 0.00088097675 m³ |
| 1 pk | 0.0088097675 m³ |
| 2 pk | 0.017619535 m³ |
| 3 pk | 0.026429303 m³ |
| 5 pk | 0.044048838 m³ |
| 10 pk | 0.088097675 m³ |
| 20 pk | 0.17619535 m³ |
| 50 pk | 0.44048838 m³ |
| 100 pk | 0.88097675 m³ |
| 1000 pk | 8.8097675 m³ |
Peck (US) (pk)
Definition: A US customary dry-measure unit equal to a quarter of a US bushel, or exactly 8.8097675424 liters.
History: Descended from the English Winchester measure system used since the Middle Ages for grain and produce trade, the peck was carried to America by colonial settlers and retained in US customary units even as Britain's own peck was later redefined.
Current use: Still used at US farmers' markets and orchards for selling apples, pears, and other produce by the peck rather than by weight.
Cubic Meter (m³)
Definition: The SI derived unit of volume, equal to the space occupied by a cube one meter on each side — exactly 1,000 liters.
History: Defined directly from the meter once that base unit was standardized in the 1790s French metric reform, giving science and engineering a coherent volume unit tied to the same decimal system as length.
Current use: Used for large-scale volume measurement such as shipping containers, concrete pours, warehouse storage, and bulk grain silo capacity in metric countries.
Supported Units
| Unit | Symbol | In Liters |
|---|---|---|
| Liter | L | 1 L |
| Cubic Meter | m³ | 1000 L |
| Cubic Foot | ft³ | 28.316847 L |
| Peck (US) | pk | 8.8097675 L |
| Peck (UK) | pk | 9.09218 L |
| Bushel (US) | bu | 35.23907 L |
| Bushel (UK) | bu | 36.36872 L |
| Dry Quart (US) | qt | 1.1012209 L |
| Dry Pint (US) | pt | 0.55061047 L |
About These Parameters
- Value
- The quantity of dry goods you want to convert, expressed in the "From" unit. Accepts decimals — useful for fractional bushels or pecks.
- From Unit
- The dry-measure or metric volume unit your input value is currently measured in, such as bushels, pecks, or liters.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Dry Volume Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the liter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Peck (US) → Cubic Meter: multiply by 0.0088097675. For example, 1 pk × 0.0088097675 = 0.0088097675 m³.
Why Dry and Liquid Measure Differ
A US dry quart (1.101 L) is about 16% larger than a US liquid quart (0.946 L), even though both are called "quart" — the same is true of the dry pint versus the liquid pint. This split traces back to how each was originally measured: liquids were sold by a sealed container filled to a fixed level, while dry goods like grain, apples, and berries were traditionally sold "heaped" — piled above the rim of an open measure — so the dry-measure system needed its own, separately standardized set of volumes even though English speakers reused the same unit names for both.
US vs. UK Bushels and Pecks
The US bushel (35.239 L) and the British imperial bushel (36.369 L) are not the same size — about a 3% difference — because the two countries standardized their dry-measure systems at different times. The US bushel descends from the older English Winchester measure that colonial settlers carried across the Atlantic, while Britain later redefined its own bushel and peck under the Weights and Measures Act of 1824, based on the imperial gallon. The US never adopted that later British redefinition, so American and British/Commonwealth bushels have quietly diverged ever since.
Example
1 pk equals 0.0088097675 m³. For scale, a standard bushel of corn is about that same 4 pk of volume (and weighs roughly 56 lb / 25.4 kg) — so this value is about 0.25× a bushel of corn by volume.
Frequently Asked Questions
How many Cubic Meters are in 1 Peck (US)?
1 Peck (US) (pk) equals exactly 0.0088097675 Cubic Meters (m³).
Is a dry quart the same as a liquid quart?
No. A US dry quart is 1.1012209428 liters, while a US liquid quart is 0.946352946 liters — about 16% smaller. They share a name because both trace back to English measuring traditions, but they were standardized on separate physical containers, so they should never be treated as interchangeable.
Why do farmers still use bushels?
US grain markets, contracts, and price quotes (for example, corn and wheat futures on the Chicago Board of Trade) were built around the bushel long before metric units became common, and that infrastructure is deeply embedded in agricultural pricing, storage, and logistics — converting the entire industry's unit of account to metric would be far more disruptive than simply converting bushels to other units when needed, which this page does instantly.
How accurate are these conversions?
Every conversion factor used here is the exact, standardized value for that unit (for example, 1 US bushel = exactly 35.2390701696 liters by the US customary definition) — results are limited only by floating-point display precision, not by rounded conversion constants.