Convert Cubic Feet to Pecks (US)
Cubic Foot (ft³) to Peck (US) (pk) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 ft³ = 3.2142558 pk
1 Cubic Foot = 3.2142558 Pecks (US)
1 Peck (US) = 0.311114 Cubic Feet
1 ft³ in every supported unit
Conversion chart: Cubic Foot to Pecks (US)
Conversion table
| Cubic Foot (ft³) | Peck (US) (pk) |
|---|---|
| 0.01 ft³ | 0.032142558 pk |
| 0.1 ft³ | 0.32142558 pk |
| 1 ft³ | 3.2142558 pk |
| 2 ft³ | 6.4285116 pk |
| 3 ft³ | 9.6427675 pk |
| 5 ft³ | 16.071279 pk |
| 10 ft³ | 32.142558 pk |
| 20 ft³ | 64.285116 pk |
| 50 ft³ | 160.71279 pk |
| 100 ft³ | 321.42558 pk |
| 1000 ft³ | 3214.2558 pk |
Cubic Foot (ft³)
Definition: Equal to the volume of a cube one foot on each side, or exactly 28.316846592 liters, derived from the internationally agreed foot (0.3048 m).
History: A natural extension of the imperial foot into three dimensions, used in English-speaking countries since the foot itself was standardized; it became especially common in 20th-century US building and landscaping trades.
Current use: Widely used in the US for soil, mulch, compost, and potting-mix volume at garden centers, as well as for shipping and produce-crate capacity.
Peck (US) (pk)
Definition: A US customary dry-measure unit equal to a quarter of a US bushel, or exactly 8.8097675424 liters.
History: Descended from the English Winchester measure system used since the Middle Ages for grain and produce trade, the peck was carried to America by colonial settlers and retained in US customary units even as Britain's own peck was later redefined.
Current use: Still used at US farmers' markets and orchards for selling apples, pears, and other produce by the peck rather than by weight.
Supported Units
| Unit | Symbol | In Liters |
|---|---|---|
| Liter | L | 1 L |
| Cubic Meter | m³ | 1000 L |
| Cubic Foot | ft³ | 28.316847 L |
| Peck (US) | pk | 8.8097675 L |
| Peck (UK) | pk | 9.09218 L |
| Bushel (US) | bu | 35.23907 L |
| Bushel (UK) | bu | 36.36872 L |
| Dry Quart (US) | qt | 1.1012209 L |
| Dry Pint (US) | pt | 0.55061047 L |
About These Parameters
- Value
- The quantity of dry goods you want to convert, expressed in the "From" unit. Accepts decimals — useful for fractional bushels or pecks.
- From Unit
- The dry-measure or metric volume unit your input value is currently measured in, such as bushels, pecks, or liters.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Dry Volume Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the liter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Cubic Foot → Peck (US): multiply by 3.2142558. For example, 1 ft³ × 3.2142558 = 3.2142558 pk.
Why Dry and Liquid Measure Differ
A US dry quart (1.101 L) is about 16% larger than a US liquid quart (0.946 L), even though both are called "quart" — the same is true of the dry pint versus the liquid pint. This split traces back to how each was originally measured: liquids were sold by a sealed container filled to a fixed level, while dry goods like grain, apples, and berries were traditionally sold "heaped" — piled above the rim of an open measure — so the dry-measure system needed its own, separately standardized set of volumes even though English speakers reused the same unit names for both.
US vs. UK Bushels and Pecks
The US bushel (35.239 L) and the British imperial bushel (36.369 L) are not the same size — about a 3% difference — because the two countries standardized their dry-measure systems at different times. The US bushel descends from the older English Winchester measure that colonial settlers carried across the Atlantic, while Britain later redefined its own bushel and peck under the Weights and Measures Act of 1824, based on the imperial gallon. The US never adopted that later British redefinition, so American and British/Commonwealth bushels have quietly diverged ever since.
Example
1 ft³ equals 3.2142558 pk. For scale, a standard bushel of corn is about that same 1.244456 ft³ of volume (and weighs roughly 56 lb / 25.4 kg) — so this value is about 0.8× a bushel of corn by volume.
Frequently Asked Questions
How many Pecks (US) are in 1 Cubic Foot?
1 Cubic Foot (ft³) equals exactly 3.2142558 Pecks (US) (pk).
Is a dry quart the same as a liquid quart?
No. A US dry quart is 1.1012209428 liters, while a US liquid quart is 0.946352946 liters — about 16% smaller. They share a name because both trace back to English measuring traditions, but they were standardized on separate physical containers, so they should never be treated as interchangeable.
Why do farmers still use bushels?
US grain markets, contracts, and price quotes (for example, corn and wheat futures on the Chicago Board of Trade) were built around the bushel long before metric units became common, and that infrastructure is deeply embedded in agricultural pricing, storage, and logistics — converting the entire industry's unit of account to metric would be far more disruptive than simply converting bushels to other units when needed, which this page does instantly.
How accurate are these conversions?
Every conversion factor used here is the exact, standardized value for that unit (for example, 1 US bushel = exactly 35.2390701696 liters by the US customary definition) — results are limited only by floating-point display precision, not by rounded conversion constants.