Convert Dry Pints (US) to Liters
Dry Pint (US) (pt) to Liter (L) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 pt = 0.55061047 L
1 Dry Pint (US) = 0.55061047 Liters
1 Liter = 1.816166 Dry Pints (US)
1 pt in every supported unit
Conversion chart: Dry Pint (US) to Liters
Conversion table
| Dry Pint (US) (pt) | Liter (L) |
|---|---|
| 0.01 pt | 0.0055061047 L |
| 0.1 pt | 0.055061047 L |
| 1 pt | 0.55061047 L |
| 2 pt | 1.1012209 L |
| 3 pt | 1.6518314 L |
| 5 pt | 2.7530524 L |
| 10 pt | 5.5061047 L |
| 20 pt | 11.012209 L |
| 50 pt | 27.530524 L |
| 100 pt | 55.061047 L |
| 1000 pt | 550.61047 L |
Dry Pint (US) (pt)
Definition: Half of a US dry quart, equal to exactly 0.5506104714 liters — larger than the US liquid pint despite sharing the same name.
History: Part of the same historical Winchester dry-measure lineage as the bushel, peck, and dry quart, kept as a distinct unit from the liquid pint because dry goods were sold by heaped basket volume rather than a sealed liquid vessel.
Current use: Still the standard container size for berries at US supermarkets and farm stands, most familiarly as "a pint of strawberries" or "a pint of blueberries."
Liter (L)
Definition: The SI-derived metric unit of volume, equal to one cubic decimeter (a cube 10 cm on each side).
History: Introduced during the French metric reform of the 1790s alongside the meter and gram, the liter was defined so that everyday volumes could be expressed with the same decimal logic as length and mass.
Current use: The universal reference volume unit worldwide for both liquid and dry goods, and the base unit every other unit on this page is measured against.
Supported Units
| Unit | Symbol | In Liters |
|---|---|---|
| Liter | L | 1 L |
| Cubic Meter | m³ | 1000 L |
| Cubic Foot | ft³ | 28.316847 L |
| Peck (US) | pk | 8.8097675 L |
| Peck (UK) | pk | 9.09218 L |
| Bushel (US) | bu | 35.23907 L |
| Bushel (UK) | bu | 36.36872 L |
| Dry Quart (US) | qt | 1.1012209 L |
| Dry Pint (US) | pt | 0.55061047 L |
About These Parameters
- Value
- The quantity of dry goods you want to convert, expressed in the "From" unit. Accepts decimals — useful for fractional bushels or pecks.
- From Unit
- The dry-measure or metric volume unit your input value is currently measured in, such as bushels, pecks, or liters.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Dry Volume Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the liter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Dry Pint (US) → Liter: multiply by 0.55061047. For example, 1 pt × 0.55061047 = 0.55061047 L.
Why Dry and Liquid Measure Differ
A US dry quart (1.101 L) is about 16% larger than a US liquid quart (0.946 L), even though both are called "quart" — the same is true of the dry pint versus the liquid pint. This split traces back to how each was originally measured: liquids were sold by a sealed container filled to a fixed level, while dry goods like grain, apples, and berries were traditionally sold "heaped" — piled above the rim of an open measure — so the dry-measure system needed its own, separately standardized set of volumes even though English speakers reused the same unit names for both.
US vs. UK Bushels and Pecks
The US bushel (35.239 L) and the British imperial bushel (36.369 L) are not the same size — about a 3% difference — because the two countries standardized their dry-measure systems at different times. The US bushel descends from the older English Winchester measure that colonial settlers carried across the Atlantic, while Britain later redefined its own bushel and peck under the Weights and Measures Act of 1824, based on the imperial gallon. The US never adopted that later British redefinition, so American and British/Commonwealth bushels have quietly diverged ever since.
Example
1 pt equals 0.55061047 L. For scale, a standard bushel of corn is about that same 64 pt of volume (and weighs roughly 56 lb / 25.4 kg) — so this value is about 0.02× a bushel of corn by volume.
Frequently Asked Questions
How many Liters are in 1 Dry Pint (US)?
1 Dry Pint (US) (pt) equals exactly 0.55061047 Liters (L).
Is a dry quart the same as a liquid quart?
No. A US dry quart is 1.1012209428 liters, while a US liquid quart is 0.946352946 liters — about 16% smaller. They share a name because both trace back to English measuring traditions, but they were standardized on separate physical containers, so they should never be treated as interchangeable.
Why do farmers still use bushels?
US grain markets, contracts, and price quotes (for example, corn and wheat futures on the Chicago Board of Trade) were built around the bushel long before metric units became common, and that infrastructure is deeply embedded in agricultural pricing, storage, and logistics — converting the entire industry's unit of account to metric would be far more disruptive than simply converting bushels to other units when needed, which this page does instantly.
How accurate are these conversions?
Every conversion factor used here is the exact, standardized value for that unit (for example, 1 US bushel = exactly 35.2390701696 liters by the US customary definition) — results are limited only by floating-point display precision, not by rounded conversion constants.