Convert Cubic Feet to Dry Pints (US)
Cubic Foot (ft³) to Dry Pint (US) (pt) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 ft³ = 51.428093 pt
1 Cubic Foot = 51.428093 Dry Pints (US)
1 Dry Pint (US) = 0.019444625 Cubic Feet
1 ft³ in every supported unit
Conversion chart: Cubic Foot to Dry Pints (US)
Conversion table
| Cubic Foot (ft³) | Dry Pint (US) (pt) |
|---|---|
| 0.01 ft³ | 0.51428093 pt |
| 0.1 ft³ | 5.1428093 pt |
| 1 ft³ | 51.428093 pt |
| 2 ft³ | 102.85619 pt |
| 3 ft³ | 154.28428 pt |
| 5 ft³ | 257.14047 pt |
| 10 ft³ | 514.28093 pt |
| 20 ft³ | 1028.5619 pt |
| 50 ft³ | 2571.4047 pt |
| 100 ft³ | 5142.8093 pt |
| 1000 ft³ | 51428.093 pt |
Cubic Foot (ft³)
Definition: Equal to the volume of a cube one foot on each side, or exactly 28.316846592 liters, derived from the internationally agreed foot (0.3048 m).
History: A natural extension of the imperial foot into three dimensions, used in English-speaking countries since the foot itself was standardized; it became especially common in 20th-century US building and landscaping trades.
Current use: Widely used in the US for soil, mulch, compost, and potting-mix volume at garden centers, as well as for shipping and produce-crate capacity.
Dry Pint (US) (pt)
Definition: Half of a US dry quart, equal to exactly 0.5506104714 liters — larger than the US liquid pint despite sharing the same name.
History: Part of the same historical Winchester dry-measure lineage as the bushel, peck, and dry quart, kept as a distinct unit from the liquid pint because dry goods were sold by heaped basket volume rather than a sealed liquid vessel.
Current use: Still the standard container size for berries at US supermarkets and farm stands, most familiarly as "a pint of strawberries" or "a pint of blueberries."
Supported Units
| Unit | Symbol | In Liters |
|---|---|---|
| Liter | L | 1 L |
| Cubic Meter | m³ | 1000 L |
| Cubic Foot | ft³ | 28.316847 L |
| Peck (US) | pk | 8.8097675 L |
| Peck (UK) | pk | 9.09218 L |
| Bushel (US) | bu | 35.23907 L |
| Bushel (UK) | bu | 36.36872 L |
| Dry Quart (US) | qt | 1.1012209 L |
| Dry Pint (US) | pt | 0.55061047 L |
About These Parameters
- Value
- The quantity of dry goods you want to convert, expressed in the "From" unit. Accepts decimals — useful for fractional bushels or pecks.
- From Unit
- The dry-measure or metric volume unit your input value is currently measured in, such as bushels, pecks, or liters.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Dry Volume Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the liter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Cubic Foot → Dry Pint (US): multiply by 51.428093. For example, 1 ft³ × 51.428093 = 51.428093 pt.
Why Dry and Liquid Measure Differ
A US dry quart (1.101 L) is about 16% larger than a US liquid quart (0.946 L), even though both are called "quart" — the same is true of the dry pint versus the liquid pint. This split traces back to how each was originally measured: liquids were sold by a sealed container filled to a fixed level, while dry goods like grain, apples, and berries were traditionally sold "heaped" — piled above the rim of an open measure — so the dry-measure system needed its own, separately standardized set of volumes even though English speakers reused the same unit names for both.
US vs. UK Bushels and Pecks
The US bushel (35.239 L) and the British imperial bushel (36.369 L) are not the same size — about a 3% difference — because the two countries standardized their dry-measure systems at different times. The US bushel descends from the older English Winchester measure that colonial settlers carried across the Atlantic, while Britain later redefined its own bushel and peck under the Weights and Measures Act of 1824, based on the imperial gallon. The US never adopted that later British redefinition, so American and British/Commonwealth bushels have quietly diverged ever since.
Example
1 ft³ equals 51.428093 pt. For scale, a standard bushel of corn is about that same 1.244456 ft³ of volume (and weighs roughly 56 lb / 25.4 kg) — so this value is about 0.8× a bushel of corn by volume.
Frequently Asked Questions
How many Dry Pints (US) are in 1 Cubic Foot?
1 Cubic Foot (ft³) equals exactly 51.428093 Dry Pints (US) (pt).
Is a dry quart the same as a liquid quart?
No. A US dry quart is 1.1012209428 liters, while a US liquid quart is 0.946352946 liters — about 16% smaller. They share a name because both trace back to English measuring traditions, but they were standardized on separate physical containers, so they should never be treated as interchangeable.
Why do farmers still use bushels?
US grain markets, contracts, and price quotes (for example, corn and wheat futures on the Chicago Board of Trade) were built around the bushel long before metric units became common, and that infrastructure is deeply embedded in agricultural pricing, storage, and logistics — converting the entire industry's unit of account to metric would be far more disruptive than simply converting bushels to other units when needed, which this page does instantly.
How accurate are these conversions?
Every conversion factor used here is the exact, standardized value for that unit (for example, 1 US bushel = exactly 35.2390701696 liters by the US customary definition) — results are limited only by floating-point display precision, not by rounded conversion constants.