CalculatorBoom

Convert Quantized Hall Conductances to Statmhos

Quantized Hall Conductance (e²/h) to Statmho (statmho) electric conductance conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Quantized Hall Conductance = 34827710 Statmhos

1 Statmho = 2.87128E-08 Quantized Hall Conductances

1 e²/h in every supported unit

Conversion chart: Quantized Hall Conductance to Statmhos

Conversion table

Quantized Hall Conductance (e²/h) Statmho (statmho)
0.01 e²/h 348277.1 statmho
0.1 e²/h 3482771 statmho
1 e²/h 34827710 statmho
2 e²/h 69655419 statmho
3 e²/h 1.0448313E+08 statmho
5 e²/h 1.7413855E+08 statmho
10 e²/h 3.482771E+08 statmho
20 e²/h 6.9655419E+08 statmho
50 e²/h 1.74139E+09 statmho
100 e²/h 3.48277E+09 statmho
1000 e²/h 3.48277E+10 statmho

Quantized Hall Conductance (e²/h)

Definition: A fundamental physical constant of conductance, equal to the square of the elementary charge divided by the Planck constant (e²/h ≈ 3.87405 × 10⁻⁵ S). It is the natural step size by which conductance jumps in the quantum Hall effect, observed in two-dimensional electron systems under strong magnetic fields at low temperature.

History: It was discovered experimentally by Klaus von Klitzing in 1980, who found that the Hall conductance of a two-dimensional electron gas increases in exact, universal integer steps of e²/h regardless of the material or sample geometry — a discovery that earned him the 1985 Nobel Prize in Physics.

Current use: Used today as a precision metrological reference: because e²/h depends only on fundamental constants, the quantum Hall effect underpins the international standard for the ohm (and by reciprocal extension, the siemens), letting national metrology labs realize electrical resistance and conductance from first principles rather than physical artifact standards.

Statmho (statmho)

Definition: A unit of conductance from the CGS-ESU (centimeter-gram-second, electrostatic) system of units, equal to roughly 1.11 × 10⁻¹² siemens. It is the reciprocal of the statohm, the CGS-ESU unit of resistance, and its value derives from the relationship between the electrostatic and SI unit systems (ultimately tied to the speed of light).

History: Like the abmho, the statmho dates to 19th-century CGS electromagnetic theory, but from the electrostatic (ESU) branch rather than the electromagnetic (EMU) branch — physicists of the era maintained both parallel CGS variants depending on whether a calculation was framed around electric charge or magnetic effects.

Current use: Almost exclusively a historical and theoretical-physics unit today, appearing in older electrostatics literature and in derivations that still favor Gaussian/CGS-ESU units over SI.

Supported Units

Unit Symbol In Siemens
Siemens S 1 S
Megasiemens MS 1000000 S
Kilosiemens kS 1000 S
Millisiemens mS 0.001 S
Microsiemens µS 1E-06 S
Ampere/Volt A/V 1 S
Mho ℧ 1 S
Gemmho gemmho 1E-06 S
Micromho µmho 1E-06 S
Abmho abmho 1E+09 S
Statmho statmho 1.11235E-12 S
Quantized Hall Conductance e²/h 3.87405E-05 S

About These Parameters

Value
The conductance value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from a picosiemens-level insulator leakage figure to a gigasiemens-scale superconductor measurement.
From Unit
The unit your input value is currently measured in — a modern component datasheet's siemens (S) rating, or a legacy figure quoted in mho, abmho, or statmho.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, which is handy when translating an older mho-based figure into the modern siemens or vice versa.

How Electric Conductance Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the siemens. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Quantized Hall Conductance → Statmho: multiply by 34827710. For example, 1 e²/h × 34827710 = 34827710 statmho.

Conductance Is the Reciprocal of Resistance

Conductance and resistance describe the same physical relationship between voltage and current from opposite directions: resistance (ohms) measures how strongly a component opposes current flow, while conductance (siemens) measures how readily it allows current through. Because they are exact reciprocals (G = 1/R), a very good conductor — a thick copper busbar, for example — has a tiny resistance and a correspondingly large conductance, while a good insulator has a huge resistance and a conductance so small it is usually expressed in picosiemens or smaller. This reciprocal relationship is also why conductances of components wired in parallel simply add together, while their resistances do not.

From Mho to Siemens

Before 1971, the unit of conductance had no single settled name: engineers commonly called it the "mho" — "ohm" spelled backwards, with an upside-down omega (℧) as its symbol — to emphasize that it was resistance's reciprocal. The International Electrotechnical Commission formally adopted "siemens," named for Ernst Werner von Siemens, in 1935, and the unit was folded into the International System of Units in 1971, gradually displacing "mho" in textbooks, standards, and datasheets over the following decades. The two units remain numerically identical (1 mho = 1 S), so older equipment and literature that still uses "mho" converts to the modern siemens with a factor of exactly 1.

Example

A conductance of 1 e²/h equals 34827710 statmho. For scale, a typical incandescent light bulb filament has a conductance around 0.08 siemens (roughly 12 ohms of resistance), a thick copper ground strap can exceed several thousand siemens, and a high-quality electrical insulator's leakage conductance is often measured in picosiemens or smaller.

Frequently Asked Questions

How many Statmhos are in 1 Quantized Hall Conductance?

1 Quantized Hall Conductance (e²/h) equals exactly 34827710 Statmhos (statmho).

What is the difference between conductance and conductivity?

Conductance (siemens) describes a specific object or component's ability to conduct current — it depends on that object's size, shape, and material. Conductivity (siemens per meter) is a material property that strips out size and shape, describing how well a material conducts current per unit length regardless of the particular sample. Use this converter for whole-component conductance; use the companion Electric Conductivity Converter for the size-independent material property.

Is mho the same as siemens?

Yes — mho and siemens are numerically identical (1 mho = 1 S). "Mho" was the informal, widely used name for the unit before the International Electrotechnical Commission standardized "siemens" in 1935, and it still appears in older equipment, textbooks, and some U.S. water-quality literature.

Why is the quantized Hall conductance such a small, oddly specific number?

The quantized Hall conductance (e²/h ≈ 3.87405 × 10⁻⁵ S) is a fundamental physical constant, not a rounded engineering unit — it's built from the elementary charge (e) and the Planck constant (h). Discovered by Klaus von Klitzing in 1980, it's the exact step size by which conductance jumps in the quantum Hall effect, and because it depends only on fundamental constants, it's used today as a precision reference for realizing the ohm and siemens in metrology labs.

What are abmho and statmho used for today?

Abmho (from the CGS-EMU system) and statmho (from the CGS-ESU system) are both 19th-century units of conductance that predate the SI. They're rarely used in modern engineering, but still appear occasionally in historical physics literature and in theoretical work that frames electromagnetic calculations natively in CGS units rather than SI.

Convert Quantized Hall Conductance to Other Electric Conductance Units

Possible Electric Conductance Conversions

Mho to Kilosiemens Kilosiemens to Millisiemens Ampere/Volt to Quantized Hall Conductances Kilosiemens to Mhos Micromho to Abmhos Quantized Hall Conductance to Kilosiemens Microsiemens to Quantized Hall Conductances Abmho to Kilosiemens Kilosiemens to Microsiemens Quantized Hall Conductance to Micromhos Micromho to Kilosiemens Abmho to Microsiemens Megasiemens to Abmhos Statmho to Amperes/Volt Quantized Hall Conductance to Statmhos Kilosiemens to Abmhos Abmho to Megasiemens Ampere/Volt to Millisiemens Microsiemens to Megasiemens Microsiemens to Statmhos Ampere/Volt to Abmhos Micromho to Mhos Siemens to Kilosiemens Statmho to Megasiemens Micromho to Gemmhos Quantized Hall Conductance to Amperes/Volt Millisiemens to Mhos Megasiemens to Microsiemens Micromho to Statmhos Millisiemens to Quantized Hall Conductances Siemens to Millisiemens Megasiemens to Micromhos Kilosiemens to Statmhos Quantized Hall Conductance to Megasiemens Statmho to Mhos Mho to Microsiemens Siemens to Quantized Hall Conductances Quantized Hall Conductance to Abmhos Quantized Hall Conductance to Microsiemens Siemens to Microsiemens Kilosiemens to Micromhos Gemmho to Kilosiemens Kilosiemens to Megasiemens Gemmho to Abmhos Kilosiemens to Quantized Hall Conductances Microsiemens to Abmhos Megasiemens to Gemmhos Microsiemens to Siemens Mho to Abmhos Gemmho to Microsiemens Ampere/Volt to Microsiemens Megasiemens to Millisiemens Mho to Gemmhos Siemens to Gemmhos Mho to Statmhos Abmho to Mhos Gemmho to Millisiemens Ampere/Volt to Micromhos Quantized Hall Conductance to Gemmhos Statmho to Millisiemens Mho to Megasiemens Millisiemens to Abmhos Megasiemens to Amperes/Volt Gemmho to Megasiemens Megasiemens to Statmhos Abmho to Micromhos Kilosiemens to Siemens Quantized Hall Conductance to Millisiemens Ampere/Volt to Gemmhos Ampere/Volt to Statmhos Gemmho to Amperes/Volt Statmho to Siemens Microsiemens to Amperes/Volt Millisiemens to Gemmhos Millisiemens to Siemens Abmho to Quantized Hall Conductances Statmho to Kilosiemens Abmho to Millisiemens Megasiemens to Siemens Mho to Millisiemens Micromho to Megasiemens Statmho to Microsiemens Statmho to Abmhos Millisiemens to Statmhos Siemens to Statmhos Statmho to Quantized Hall Conductances Micromho to Microsiemens Abmho to Gemmhos Micromho to Siemens Kilosiemens to Gemmhos Millisiemens to Micromhos Siemens to Abmhos Siemens to Amperes/Volt Mho to Siemens Mho to Amperes/Volt Microsiemens to Mhos Gemmho to Mhos Quantized Hall Conductance to Mhos Microsiemens to Micromhos Gemmho to Statmhos Megasiemens to Kilosiemens Millisiemens to Microsiemens Siemens to Megasiemens Millisiemens to Amperes/Volt Gemmho to Micromhos Megasiemens to Mhos Millisiemens to Kilosiemens Ampere/Volt to Megasiemens Abmho to Siemens Mho to Micromhos Ampere/Volt to Mhos Micromho to Quantized Hall Conductances Siemens to Micromhos Siemens to Mhos Abmho to Amperes/Volt Ampere/Volt to Siemens Abmho to Statmhos Microsiemens to Millisiemens Mho to Quantized Hall Conductances Megasiemens to Quantized Hall Conductances Micromho to Amperes/Volt Quantized Hall Conductance to Siemens Microsiemens to Gemmhos Micromho to Millisiemens Gemmho to Quantized Hall Conductances Ampere/Volt to Kilosiemens Statmho to Micromhos Gemmho to Siemens Millisiemens to Megasiemens Statmho to Gemmhos Kilosiemens to Amperes/Volt Microsiemens to Kilosiemens

See also