CalculatorBoom

Convert Gemmhos to Mhos

Gemmho (gemmho) to Mho (℧) electric conductance conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Gemmho = 1E-06 Mhos

1 Mho = 1000000 Gemmhos

1 gemmho in every supported unit

Conversion chart: Gemmho to Mhos

Conversion table

Gemmho (gemmho) Mho (℧)
0.01 gemmho 1E-08 ℧
0.1 gemmho 1E-07 ℧
1 gemmho 1E-06 ℧
2 gemmho 2E-06 ℧
3 gemmho 3E-06 ℧
5 gemmho 5E-06 ℧
10 gemmho 1E-05 ℧
20 gemmho 2E-05 ℧
50 gemmho 5E-05 ℧
100 gemmho 0.0001 ℧
1000 gemmho 0.001 ℧

Gemmho (gemmho)

Definition: A specialized unit equal to one micromho (one-millionth of a mho, or one microsiemens), historically used in soil science and agricultural water testing to express the electrical conductivity of soil extracts and irrigation water.

History: The name is a contraction of "geometric mean mho," reflecting its origin in U.S. Department of Agriculture soil-salinity testing procedures of the mid-20th century, where conductivity bridges reported results directly in this unit for consistency across agricultural laboratories.

Current use: Still occasionally found in older agronomy and soil-salinity reports and lab equipment, though modern soil and water testing has largely shifted to the SI microsiemens per centimeter.

Mho (℧)

Definition: An older, non-SI name for the unit of electrical conductance, formed by spelling "ohm" backwards to emphasize that conductance is the mathematical reciprocal of resistance. Its symbol, an upside-down omega (℧), makes the same visual pun.

History: Coined in the 19th century (commonly attributed to William Thomson, Lord Kelvin, and later popularized by engineer Oliver Heaviside) as a quick, memorable way to name the reciprocal-ohm unit before any formal standards body had settled on an official name, the mho was in widespread use throughout the 20th century.

Current use: Numerically identical to the siemens (1 mho = 1 S) and still encountered in older electrical engineering textbooks, legacy equipment nameplates, and U.S. water-quality literature, even though the siemens is now the internationally standardized name.

Supported Units

Unit Symbol In Siemens
Siemens S 1 S
Megasiemens MS 1000000 S
Kilosiemens kS 1000 S
Millisiemens mS 0.001 S
Microsiemens µS 1E-06 S
Ampere/Volt A/V 1 S
Mho ℧ 1 S
Gemmho gemmho 1E-06 S
Micromho µmho 1E-06 S
Abmho abmho 1E+09 S
Statmho statmho 1.11235E-12 S
Quantized Hall Conductance e²/h 3.87405E-05 S

About These Parameters

Value
The conductance value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from a picosiemens-level insulator leakage figure to a gigasiemens-scale superconductor measurement.
From Unit
The unit your input value is currently measured in — a modern component datasheet's siemens (S) rating, or a legacy figure quoted in mho, abmho, or statmho.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, which is handy when translating an older mho-based figure into the modern siemens or vice versa.

How Electric Conductance Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the siemens. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Gemmho → Mho: multiply by 1E-06. For example, 1 gemmho × 1E-06 = 1E-06 ℧.

Conductance Is the Reciprocal of Resistance

Conductance and resistance describe the same physical relationship between voltage and current from opposite directions: resistance (ohms) measures how strongly a component opposes current flow, while conductance (siemens) measures how readily it allows current through. Because they are exact reciprocals (G = 1/R), a very good conductor — a thick copper busbar, for example — has a tiny resistance and a correspondingly large conductance, while a good insulator has a huge resistance and a conductance so small it is usually expressed in picosiemens or smaller. This reciprocal relationship is also why conductances of components wired in parallel simply add together, while their resistances do not.

From Mho to Siemens

Before 1971, the unit of conductance had no single settled name: engineers commonly called it the "mho" — "ohm" spelled backwards, with an upside-down omega (℧) as its symbol — to emphasize that it was resistance's reciprocal. The International Electrotechnical Commission formally adopted "siemens," named for Ernst Werner von Siemens, in 1935, and the unit was folded into the International System of Units in 1971, gradually displacing "mho" in textbooks, standards, and datasheets over the following decades. The two units remain numerically identical (1 mho = 1 S), so older equipment and literature that still uses "mho" converts to the modern siemens with a factor of exactly 1.

Example

A conductance of 1 gemmho equals 1E-06 ℧. For scale, a typical incandescent light bulb filament has a conductance around 0.08 siemens (roughly 12 ohms of resistance), a thick copper ground strap can exceed several thousand siemens, and a high-quality electrical insulator's leakage conductance is often measured in picosiemens or smaller.

Frequently Asked Questions

How many Mhos are in 1 Gemmho?

1 Gemmho (gemmho) equals exactly 1E-06 Mhos (℧).

What is the difference between conductance and conductivity?

Conductance (siemens) describes a specific object or component's ability to conduct current — it depends on that object's size, shape, and material. Conductivity (siemens per meter) is a material property that strips out size and shape, describing how well a material conducts current per unit length regardless of the particular sample. Use this converter for whole-component conductance; use the companion Electric Conductivity Converter for the size-independent material property.

Is mho the same as siemens?

Yes — mho and siemens are numerically identical (1 mho = 1 S). "Mho" was the informal, widely used name for the unit before the International Electrotechnical Commission standardized "siemens" in 1935, and it still appears in older equipment, textbooks, and some U.S. water-quality literature.

Why is the quantized Hall conductance such a small, oddly specific number?

The quantized Hall conductance (e²/h ≈ 3.87405 × 10⁻⁵ S) is a fundamental physical constant, not a rounded engineering unit — it's built from the elementary charge (e) and the Planck constant (h). Discovered by Klaus von Klitzing in 1980, it's the exact step size by which conductance jumps in the quantum Hall effect, and because it depends only on fundamental constants, it's used today as a precision reference for realizing the ohm and siemens in metrology labs.

What are abmho and statmho used for today?

Abmho (from the CGS-EMU system) and statmho (from the CGS-ESU system) are both 19th-century units of conductance that predate the SI. They're rarely used in modern engineering, but still appear occasionally in historical physics literature and in theoretical work that frames electromagnetic calculations natively in CGS units rather than SI.

Convert Gemmho to Other Electric Conductance Units

Possible Electric Conductance Conversions

Kilosiemens to Siemens Gemmho to Microsiemens Ampere/Volt to Abmhos Abmho to Mhos Micromho to Statmhos Ampere/Volt to Kilosiemens Gemmho to Micromhos Millisiemens to Quantized Hall Conductances Kilosiemens to Gemmhos Kilosiemens to Megasiemens Ampere/Volt to Micromhos Micromho to Abmhos Siemens to Megasiemens Micromho to Amperes/Volt Micromho to Megasiemens Millisiemens to Mhos Quantized Hall Conductance to Mhos Ampere/Volt to Mhos Quantized Hall Conductance to Abmhos Kilosiemens to Millisiemens Microsiemens to Millisiemens Ampere/Volt to Quantized Hall Conductances Mho to Quantized Hall Conductances Kilosiemens to Quantized Hall Conductances Siemens to Amperes/Volt Kilosiemens to Statmhos Megasiemens to Statmhos Micromho to Kilosiemens Mho to Siemens Megasiemens to Gemmhos Megasiemens to Abmhos Siemens to Mhos Megasiemens to Siemens Gemmho to Quantized Hall Conductances Mho to Abmhos Abmho to Megasiemens Siemens to Statmhos Gemmho to Abmhos Megasiemens to Mhos Millisiemens to Statmhos Microsiemens to Megasiemens Quantized Hall Conductance to Millisiemens Quantized Hall Conductance to Gemmhos Siemens to Gemmhos Quantized Hall Conductance to Micromhos Microsiemens to Gemmhos Statmho to Mhos Millisiemens to Micromhos Millisiemens to Megasiemens Abmho to Kilosiemens Ampere/Volt to Megasiemens Microsiemens to Siemens Statmho to Kilosiemens Megasiemens to Amperes/Volt Megasiemens to Micromhos Statmho to Millisiemens Quantized Hall Conductance to Amperes/Volt Micromho to Quantized Hall Conductances Kilosiemens to Micromhos Mho to Kilosiemens Siemens to Microsiemens Statmho to Abmhos Abmho to Siemens Millisiemens to Kilosiemens Ampere/Volt to Gemmhos Siemens to Micromhos Micromho to Mhos Mho to Microsiemens Micromho to Gemmhos Statmho to Micromhos Megasiemens to Quantized Hall Conductances Mho to Micromhos Microsiemens to Micromhos Quantized Hall Conductance to Kilosiemens Mho to Statmhos Microsiemens to Abmhos Gemmho to Megasiemens Millisiemens to Abmhos Microsiemens to Mhos Millisiemens to Siemens Gemmho to Statmhos Siemens to Abmhos Abmho to Quantized Hall Conductances Millisiemens to Gemmhos Abmho to Microsiemens Gemmho to Millisiemens Statmho to Microsiemens Statmho to Megasiemens Mho to Gemmhos Abmho to Amperes/Volt Millisiemens to Amperes/Volt Microsiemens to Amperes/Volt Abmho to Micromhos Gemmho to Kilosiemens Gemmho to Amperes/Volt Micromho to Microsiemens Ampere/Volt to Siemens Statmho to Siemens Statmho to Quantized Hall Conductances Micromho to Siemens Quantized Hall Conductance to Siemens Ampere/Volt to Millisiemens Microsiemens to Statmhos Statmho to Amperes/Volt Quantized Hall Conductance to Megasiemens Kilosiemens to Abmhos Quantized Hall Conductance to Statmhos Kilosiemens to Amperes/Volt Ampere/Volt to Microsiemens Gemmho to Mhos Megasiemens to Kilosiemens Millisiemens to Microsiemens Siemens to Quantized Hall Conductances Mho to Millisiemens Microsiemens to Quantized Hall Conductances Siemens to Millisiemens Gemmho to Siemens Abmho to Millisiemens Mho to Amperes/Volt Kilosiemens to Microsiemens Microsiemens to Kilosiemens Statmho to Gemmhos Megasiemens to Millisiemens Ampere/Volt to Statmhos Abmho to Gemmhos Micromho to Millisiemens Abmho to Statmhos Quantized Hall Conductance to Microsiemens Megasiemens to Microsiemens Siemens to Kilosiemens Kilosiemens to Mhos Mho to Megasiemens

See also