CalculatorBoom

Convert Abmhos to Millisiemens

Abmho (abmho) to Millisiemens (mS) electric conductance conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Abmho = 1E+12 Millisiemens

1 Millisiemens = 1E-12 Abmhos

1 abmho in every supported unit

Conversion chart: Abmho to Millisiemens

Conversion table

Abmho (abmho) Millisiemens (mS)
0.01 abmho 1E+10 mS
0.1 abmho 1E+11 mS
1 abmho 1E+12 mS
2 abmho 2E+12 mS
3 abmho 3E+12 mS
5 abmho 5E+12 mS
10 abmho 1E+13 mS
20 abmho 2E+13 mS
50 abmho 5E+13 mS
100 abmho 1E+14 mS
1000 abmho 1E+15 mS

Abmho (abmho)

Definition: A unit of conductance from the CGS-EMU (centimeter-gram-second, electromagnetic) system of units, equal to one billion siemens. It is the reciprocal of the abohm, the CGS-EMU unit of resistance, which is itself defined as 10⁻⁹ ohm.

History: The abmho emerged in the 19th century alongside the rest of the CGS-EMU system, which physicists used for electromagnetic calculations before the modern SI (built on the meter-kilogram-second-ampere system) became the international standard in the mid-20th century.

Current use: Rarely used today outside of historical physics literature and specialized electromagnetic theory contexts that still work natively in CGS units, since virtually all modern engineering work has standardized on the SI siemens.

Millisiemens (mS)

Definition: One-thousandth of a siemens, an SI-prefixed submultiple commonly used for conductance values in the range typical of everyday electronic components and biological tissue measurements.

History: The milli- prefix is part of the original metric system dating to 1795 and was applied to the siemens as soon as the unit itself entered official use in 1935 and later the SI in 1971.

Current use: Frequently seen in electrochemistry, biosensor, and bioimpedance work — for example, describing the conductance of skin, electrolyte solutions, or small electronic sensor elements, where whole-siemens values would be inconveniently large fractions.

Supported Units

Unit Symbol In Siemens
Siemens S 1 S
Megasiemens MS 1000000 S
Kilosiemens kS 1000 S
Millisiemens mS 0.001 S
Microsiemens µS 1E-06 S
Ampere/Volt A/V 1 S
Mho ℧ 1 S
Gemmho gemmho 1E-06 S
Micromho µmho 1E-06 S
Abmho abmho 1E+09 S
Statmho statmho 1.11235E-12 S
Quantized Hall Conductance e²/h 3.87405E-05 S

About These Parameters

Value
The conductance value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from a picosiemens-level insulator leakage figure to a gigasiemens-scale superconductor measurement.
From Unit
The unit your input value is currently measured in — a modern component datasheet's siemens (S) rating, or a legacy figure quoted in mho, abmho, or statmho.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, which is handy when translating an older mho-based figure into the modern siemens or vice versa.

How Electric Conductance Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the siemens. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Abmho → Millisiemens: multiply by 1E+12. For example, 1 abmho × 1E+12 = 1E+12 mS.

Conductance Is the Reciprocal of Resistance

Conductance and resistance describe the same physical relationship between voltage and current from opposite directions: resistance (ohms) measures how strongly a component opposes current flow, while conductance (siemens) measures how readily it allows current through. Because they are exact reciprocals (G = 1/R), a very good conductor — a thick copper busbar, for example — has a tiny resistance and a correspondingly large conductance, while a good insulator has a huge resistance and a conductance so small it is usually expressed in picosiemens or smaller. This reciprocal relationship is also why conductances of components wired in parallel simply add together, while their resistances do not.

From Mho to Siemens

Before 1971, the unit of conductance had no single settled name: engineers commonly called it the "mho" — "ohm" spelled backwards, with an upside-down omega (℧) as its symbol — to emphasize that it was resistance's reciprocal. The International Electrotechnical Commission formally adopted "siemens," named for Ernst Werner von Siemens, in 1935, and the unit was folded into the International System of Units in 1971, gradually displacing "mho" in textbooks, standards, and datasheets over the following decades. The two units remain numerically identical (1 mho = 1 S), so older equipment and literature that still uses "mho" converts to the modern siemens with a factor of exactly 1.

Example

A conductance of 1 abmho equals 1E+12 mS. For scale, a typical incandescent light bulb filament has a conductance around 0.08 siemens (roughly 12 ohms of resistance), a thick copper ground strap can exceed several thousand siemens, and a high-quality electrical insulator's leakage conductance is often measured in picosiemens or smaller.

Frequently Asked Questions

How many Millisiemens are in 1 Abmho?

1 Abmho (abmho) equals exactly 1E+12 Millisiemens (mS).

What is the difference between conductance and conductivity?

Conductance (siemens) describes a specific object or component's ability to conduct current — it depends on that object's size, shape, and material. Conductivity (siemens per meter) is a material property that strips out size and shape, describing how well a material conducts current per unit length regardless of the particular sample. Use this converter for whole-component conductance; use the companion Electric Conductivity Converter for the size-independent material property.

Is mho the same as siemens?

Yes — mho and siemens are numerically identical (1 mho = 1 S). "Mho" was the informal, widely used name for the unit before the International Electrotechnical Commission standardized "siemens" in 1935, and it still appears in older equipment, textbooks, and some U.S. water-quality literature.

Why is the quantized Hall conductance such a small, oddly specific number?

The quantized Hall conductance (e²/h ≈ 3.87405 × 10⁻⁵ S) is a fundamental physical constant, not a rounded engineering unit — it's built from the elementary charge (e) and the Planck constant (h). Discovered by Klaus von Klitzing in 1980, it's the exact step size by which conductance jumps in the quantum Hall effect, and because it depends only on fundamental constants, it's used today as a precision reference for realizing the ohm and siemens in metrology labs.

What are abmho and statmho used for today?

Abmho (from the CGS-EMU system) and statmho (from the CGS-ESU system) are both 19th-century units of conductance that predate the SI. They're rarely used in modern engineering, but still appear occasionally in historical physics literature and in theoretical work that frames electromagnetic calculations natively in CGS units rather than SI.

Convert Abmho to Other Electric Conductance Units

Possible Electric Conductance Conversions

Micromho to Millisiemens Microsiemens to Kilosiemens Siemens to Micromhos Megasiemens to Siemens Megasiemens to Kilosiemens Mho to Statmhos Ampere/Volt to Siemens Micromho to Quantized Hall Conductances Millisiemens to Megasiemens Megasiemens to Gemmhos Millisiemens to Mhos Ampere/Volt to Micromhos Micromho to Siemens Millisiemens to Microsiemens Siemens to Amperes/Volt Microsiemens to Gemmhos Micromho to Megasiemens Siemens to Mhos Microsiemens to Millisiemens Quantized Hall Conductance to Amperes/Volt Microsiemens to Statmhos Ampere/Volt to Megasiemens Ampere/Volt to Mhos Kilosiemens to Microsiemens Statmho to Gemmhos Ampere/Volt to Kilosiemens Microsiemens to Mhos Statmho to Kilosiemens Mho to Siemens Quantized Hall Conductance to Micromhos Millisiemens to Micromhos Statmho to Millisiemens Quantized Hall Conductance to Abmhos Abmho to Millisiemens Statmho to Siemens Mho to Abmhos Ampere/Volt to Millisiemens Microsiemens to Megasiemens Quantized Hall Conductance to Mhos Ampere/Volt to Abmhos Abmho to Megasiemens Siemens to Statmhos Kilosiemens to Mhos Siemens to Quantized Hall Conductances Abmho to Quantized Hall Conductances Siemens to Gemmhos Siemens to Megasiemens Kilosiemens to Micromhos Mho to Millisiemens Megasiemens to Mhos Abmho to Siemens Abmho to Statmhos Statmho to Mhos Quantized Hall Conductance to Siemens Microsiemens to Siemens Micromho to Kilosiemens Abmho to Mhos Quantized Hall Conductance to Gemmhos Micromho to Abmhos Ampere/Volt to Microsiemens Gemmho to Microsiemens Quantized Hall Conductance to Microsiemens Statmho to Micromhos Millisiemens to Gemmhos Mho to Microsiemens Megasiemens to Micromhos Microsiemens to Abmhos Gemmho to Mhos Abmho to Amperes/Volt Statmho to Megasiemens Quantized Hall Conductance to Millisiemens Statmho to Abmhos Gemmho to Micromhos Kilosiemens to Megasiemens Gemmho to Quantized Hall Conductances Gemmho to Kilosiemens Kilosiemens to Siemens Micromho to Statmhos Megasiemens to Quantized Hall Conductances Microsiemens to Quantized Hall Conductances Mho to Quantized Hall Conductances Siemens to Millisiemens Mho to Amperes/Volt Millisiemens to Quantized Hall Conductances Mho to Micromhos Mho to Kilosiemens Microsiemens to Amperes/Volt Ampere/Volt to Gemmhos Microsiemens to Micromhos Millisiemens to Abmhos Gemmho to Millisiemens Siemens to Abmhos Gemmho to Siemens Siemens to Kilosiemens Micromho to Gemmhos Abmho to Micromhos Millisiemens to Siemens Kilosiemens to Quantized Hall Conductances Micromho to Amperes/Volt Abmho to Microsiemens Megasiemens to Statmhos Kilosiemens to Millisiemens Millisiemens to Statmhos Quantized Hall Conductance to Statmhos Gemmho to Abmhos Gemmho to Megasiemens Statmho to Quantized Hall Conductances Kilosiemens to Gemmhos Gemmho to Statmhos Mho to Gemmhos Statmho to Amperes/Volt Quantized Hall Conductance to Kilosiemens Megasiemens to Amperes/Volt Ampere/Volt to Statmhos Megasiemens to Abmhos Abmho to Kilosiemens Millisiemens to Amperes/Volt Kilosiemens to Abmhos Megasiemens to Millisiemens Micromho to Microsiemens Abmho to Gemmhos Mho to Megasiemens Siemens to Microsiemens Megasiemens to Microsiemens Kilosiemens to Amperes/Volt Statmho to Microsiemens Kilosiemens to Statmhos Ampere/Volt to Quantized Hall Conductances Gemmho to Amperes/Volt Millisiemens to Kilosiemens Quantized Hall Conductance to Megasiemens Micromho to Mhos

See also