CalculatorBoom

Convert Quantized Hall Conductances to Microsiemens

Quantized Hall Conductance (e²/h) to Microsiemens (µS) electric conductance conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Quantized Hall Conductance = 38.7405 Microsiemens

1 Microsiemens = 0.02581278 Quantized Hall Conductances

1 e²/h in every supported unit

Conversion chart: Quantized Hall Conductance to Microsiemens

Conversion table

Quantized Hall Conductance (e²/h) Microsiemens (µS)
0.01 e²/h 0.387405 µS
0.1 e²/h 3.87405 µS
1 e²/h 38.7405 µS
2 e²/h 77.481 µS
3 e²/h 116.2215 µS
5 e²/h 193.7025 µS
10 e²/h 387.405 µS
20 e²/h 774.81 µS
50 e²/h 1937.025 µS
100 e²/h 3874.05 µS
1000 e²/h 38740.5 µS

Quantized Hall Conductance (e²/h)

Definition: A fundamental physical constant of conductance, equal to the square of the elementary charge divided by the Planck constant (e²/h ≈ 3.87405 × 10⁻⁵ S). It is the natural step size by which conductance jumps in the quantum Hall effect, observed in two-dimensional electron systems under strong magnetic fields at low temperature.

History: It was discovered experimentally by Klaus von Klitzing in 1980, who found that the Hall conductance of a two-dimensional electron gas increases in exact, universal integer steps of e²/h regardless of the material or sample geometry — a discovery that earned him the 1985 Nobel Prize in Physics.

Current use: Used today as a precision metrological reference: because e²/h depends only on fundamental constants, the quantum Hall effect underpins the international standard for the ohm (and by reciprocal extension, the siemens), letting national metrology labs realize electrical resistance and conductance from first principles rather than physical artifact standards.

Microsiemens (µS)

Definition: One-millionth of a siemens, the SI-prefixed submultiple most often used for the low conductance values typical of insulators, dilute solutions, and leakage-current measurements.

History: The micro- prefix was formally adopted into the metric system in 1873 by the British Association for the Advancement of Science and carried into the modern SI; it became the standard companion prefix for the siemens once that unit replaced the older micromho in technical usage after 1971.

Current use: Widely used today in water-quality and laboratory instrumentation (often alongside its per-length cousin, microsiemens per centimeter, on the companion Electric Conductivity Converter) and in specifying leakage conductance of insulation and dielectric materials.

Supported Units

Unit Symbol In Siemens
Siemens S 1 S
Megasiemens MS 1000000 S
Kilosiemens kS 1000 S
Millisiemens mS 0.001 S
Microsiemens µS 1E-06 S
Ampere/Volt A/V 1 S
Mho ℧ 1 S
Gemmho gemmho 1E-06 S
Micromho µmho 1E-06 S
Abmho abmho 1E+09 S
Statmho statmho 1.11235E-12 S
Quantized Hall Conductance e²/h 3.87405E-05 S

About These Parameters

Value
The conductance value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from a picosiemens-level insulator leakage figure to a gigasiemens-scale superconductor measurement.
From Unit
The unit your input value is currently measured in — a modern component datasheet's siemens (S) rating, or a legacy figure quoted in mho, abmho, or statmho.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, which is handy when translating an older mho-based figure into the modern siemens or vice versa.

How Electric Conductance Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the siemens. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Quantized Hall Conductance → Microsiemens: multiply by 38.7405. For example, 1 e²/h × 38.7405 = 38.7405 µS.

Conductance Is the Reciprocal of Resistance

Conductance and resistance describe the same physical relationship between voltage and current from opposite directions: resistance (ohms) measures how strongly a component opposes current flow, while conductance (siemens) measures how readily it allows current through. Because they are exact reciprocals (G = 1/R), a very good conductor — a thick copper busbar, for example — has a tiny resistance and a correspondingly large conductance, while a good insulator has a huge resistance and a conductance so small it is usually expressed in picosiemens or smaller. This reciprocal relationship is also why conductances of components wired in parallel simply add together, while their resistances do not.

From Mho to Siemens

Before 1971, the unit of conductance had no single settled name: engineers commonly called it the "mho" — "ohm" spelled backwards, with an upside-down omega (℧) as its symbol — to emphasize that it was resistance's reciprocal. The International Electrotechnical Commission formally adopted "siemens," named for Ernst Werner von Siemens, in 1935, and the unit was folded into the International System of Units in 1971, gradually displacing "mho" in textbooks, standards, and datasheets over the following decades. The two units remain numerically identical (1 mho = 1 S), so older equipment and literature that still uses "mho" converts to the modern siemens with a factor of exactly 1.

Example

A conductance of 1 e²/h equals 38.7405 µS. For scale, a typical incandescent light bulb filament has a conductance around 0.08 siemens (roughly 12 ohms of resistance), a thick copper ground strap can exceed several thousand siemens, and a high-quality electrical insulator's leakage conductance is often measured in picosiemens or smaller.

Frequently Asked Questions

How many Microsiemens are in 1 Quantized Hall Conductance?

1 Quantized Hall Conductance (e²/h) equals exactly 38.7405 Microsiemens (µS).

What is the difference between conductance and conductivity?

Conductance (siemens) describes a specific object or component's ability to conduct current — it depends on that object's size, shape, and material. Conductivity (siemens per meter) is a material property that strips out size and shape, describing how well a material conducts current per unit length regardless of the particular sample. Use this converter for whole-component conductance; use the companion Electric Conductivity Converter for the size-independent material property.

Is mho the same as siemens?

Yes — mho and siemens are numerically identical (1 mho = 1 S). "Mho" was the informal, widely used name for the unit before the International Electrotechnical Commission standardized "siemens" in 1935, and it still appears in older equipment, textbooks, and some U.S. water-quality literature.

Why is the quantized Hall conductance such a small, oddly specific number?

The quantized Hall conductance (e²/h ≈ 3.87405 × 10⁻⁵ S) is a fundamental physical constant, not a rounded engineering unit — it's built from the elementary charge (e) and the Planck constant (h). Discovered by Klaus von Klitzing in 1980, it's the exact step size by which conductance jumps in the quantum Hall effect, and because it depends only on fundamental constants, it's used today as a precision reference for realizing the ohm and siemens in metrology labs.

What are abmho and statmho used for today?

Abmho (from the CGS-EMU system) and statmho (from the CGS-ESU system) are both 19th-century units of conductance that predate the SI. They're rarely used in modern engineering, but still appear occasionally in historical physics literature and in theoretical work that frames electromagnetic calculations natively in CGS units rather than SI.

Convert Quantized Hall Conductance to Other Electric Conductance Units

Possible Electric Conductance Conversions

Mho to Quantized Hall Conductances Megasiemens to Siemens Mho to Kilosiemens Kilosiemens to Statmhos Statmho to Micromhos Gemmho to Abmhos Statmho to Abmhos Gemmho to Statmhos Microsiemens to Statmhos Megasiemens to Kilosiemens Kilosiemens to Quantized Hall Conductances Gemmho to Quantized Hall Conductances Quantized Hall Conductance to Millisiemens Microsiemens to Quantized Hall Conductances Mho to Amperes/Volt Ampere/Volt to Quantized Hall Conductances Gemmho to Microsiemens Microsiemens to Amperes/Volt Microsiemens to Gemmhos Ampere/Volt to Micromhos Siemens to Microsiemens Quantized Hall Conductance to Gemmhos Abmho to Kilosiemens Abmho to Siemens Quantized Hall Conductance to Mhos Millisiemens to Siemens Ampere/Volt to Siemens Micromho to Mhos Kilosiemens to Amperes/Volt Statmho to Megasiemens Microsiemens to Millisiemens Statmho to Kilosiemens Megasiemens to Amperes/Volt Siemens to Millisiemens Kilosiemens to Megasiemens Millisiemens to Microsiemens Millisiemens to Abmhos Gemmho to Mhos Statmho to Microsiemens Siemens to Kilosiemens Siemens to Megasiemens Millisiemens to Megasiemens Ampere/Volt to Microsiemens Statmho to Millisiemens Ampere/Volt to Megasiemens Millisiemens to Quantized Hall Conductances Micromho to Millisiemens Microsiemens to Micromhos Quantized Hall Conductance to Amperes/Volt Abmho to Microsiemens Kilosiemens to Siemens Mho to Megasiemens Mho to Millisiemens Microsiemens to Megasiemens Millisiemens to Micromhos Megasiemens to Mhos Megasiemens to Abmhos Statmho to Quantized Hall Conductances Mho to Gemmhos Micromho to Gemmhos Kilosiemens to Gemmhos Siemens to Micromhos Gemmho to Kilosiemens Abmho to Quantized Hall Conductances Micromho to Siemens Micromho to Amperes/Volt Micromho to Statmhos Mho to Abmhos Siemens to Gemmhos Abmho to Micromhos Mho to Micromhos Millisiemens to Gemmhos Microsiemens to Kilosiemens Statmho to Amperes/Volt Millisiemens to Mhos Kilosiemens to Micromhos Siemens to Amperes/Volt Mho to Microsiemens Millisiemens to Amperes/Volt Megasiemens to Microsiemens Gemmho to Amperes/Volt Abmho to Statmhos Kilosiemens to Microsiemens Micromho to Quantized Hall Conductances Statmho to Gemmhos Ampere/Volt to Gemmhos Microsiemens to Abmhos Micromho to Megasiemens Megasiemens to Micromhos Microsiemens to Mhos Abmho to Megasiemens Abmho to Mhos Microsiemens to Siemens Kilosiemens to Abmhos Ampere/Volt to Kilosiemens Siemens to Quantized Hall Conductances Gemmho to Megasiemens Mho to Siemens Kilosiemens to Millisiemens Ampere/Volt to Abmhos Megasiemens to Statmhos Quantized Hall Conductance to Siemens Ampere/Volt to Mhos Abmho to Amperes/Volt Gemmho to Millisiemens Quantized Hall Conductance to Micromhos Ampere/Volt to Statmhos Megasiemens to Gemmhos Statmho to Mhos Quantized Hall Conductance to Kilosiemens Millisiemens to Kilosiemens Ampere/Volt to Millisiemens Megasiemens to Millisiemens Micromho to Microsiemens Siemens to Mhos Millisiemens to Statmhos Siemens to Abmhos Gemmho to Siemens Quantized Hall Conductance to Statmhos Quantized Hall Conductance to Abmhos Mho to Statmhos Quantized Hall Conductance to Megasiemens Megasiemens to Quantized Hall Conductances Abmho to Gemmhos Micromho to Kilosiemens Gemmho to Micromhos Abmho to Millisiemens Kilosiemens to Mhos Statmho to Siemens Quantized Hall Conductance to Microsiemens Micromho to Abmhos Siemens to Statmhos

See also