CalculatorBoom

Convert Kilosiemens to Microsiemens

Kilosiemens (kS) to Microsiemens (µS) electric conductance conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Kilosiemens = 1E+09 Microsiemens

1 Microsiemens = 1E-09 Kilosiemens

1 kS in every supported unit

Conversion chart: Kilosiemens to Microsiemens

Conversion table

Kilosiemens (kS) Microsiemens (µS)
0.01 kS 10000000 µS
0.1 kS 1E+08 µS
1 kS 1E+09 µS
2 kS 2E+09 µS
3 kS 3E+09 µS
5 kS 5E+09 µS
10 kS 1E+10 µS
20 kS 2E+10 µS
50 kS 5E+10 µS
100 kS 1E+11 µS
1000 kS 1E+12 µS

Kilosiemens (kS)

Definition: One thousand siemens, an SI-prefixed multiple for conductance values larger than a single siemens but not so large as to warrant the mega- prefix.

History: The kilo- prefix dates to the original 1795 French metric system and was carried forward unchanged into the modern SI; it was attached to the siemens as a matter of course once the unit itself was formally adopted in 1971.

Current use: Used in power-electronics and grid-equipment specifications where the conductance of busbars, large capacitor banks, or low-resistance shunts is more conveniently expressed in the thousands than in raw siemens.

Microsiemens (µS)

Definition: One-millionth of a siemens, the SI-prefixed submultiple most often used for the low conductance values typical of insulators, dilute solutions, and leakage-current measurements.

History: The micro- prefix was formally adopted into the metric system in 1873 by the British Association for the Advancement of Science and carried into the modern SI; it became the standard companion prefix for the siemens once that unit replaced the older micromho in technical usage after 1971.

Current use: Widely used today in water-quality and laboratory instrumentation (often alongside its per-length cousin, microsiemens per centimeter, on the companion Electric Conductivity Converter) and in specifying leakage conductance of insulation and dielectric materials.

Supported Units

Unit Symbol In Siemens
Siemens S 1 S
Megasiemens MS 1000000 S
Kilosiemens kS 1000 S
Millisiemens mS 0.001 S
Microsiemens µS 1E-06 S
Ampere/Volt A/V 1 S
Mho ℧ 1 S
Gemmho gemmho 1E-06 S
Micromho µmho 1E-06 S
Abmho abmho 1E+09 S
Statmho statmho 1.11235E-12 S
Quantized Hall Conductance e²/h 3.87405E-05 S

About These Parameters

Value
The conductance value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from a picosiemens-level insulator leakage figure to a gigasiemens-scale superconductor measurement.
From Unit
The unit your input value is currently measured in — a modern component datasheet's siemens (S) rating, or a legacy figure quoted in mho, abmho, or statmho.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, which is handy when translating an older mho-based figure into the modern siemens or vice versa.

How Electric Conductance Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the siemens. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Kilosiemens → Microsiemens: multiply by 1E+09. For example, 1 kS × 1E+09 = 1E+09 µS.

Conductance Is the Reciprocal of Resistance

Conductance and resistance describe the same physical relationship between voltage and current from opposite directions: resistance (ohms) measures how strongly a component opposes current flow, while conductance (siemens) measures how readily it allows current through. Because they are exact reciprocals (G = 1/R), a very good conductor — a thick copper busbar, for example — has a tiny resistance and a correspondingly large conductance, while a good insulator has a huge resistance and a conductance so small it is usually expressed in picosiemens or smaller. This reciprocal relationship is also why conductances of components wired in parallel simply add together, while their resistances do not.

From Mho to Siemens

Before 1971, the unit of conductance had no single settled name: engineers commonly called it the "mho" — "ohm" spelled backwards, with an upside-down omega (℧) as its symbol — to emphasize that it was resistance's reciprocal. The International Electrotechnical Commission formally adopted "siemens," named for Ernst Werner von Siemens, in 1935, and the unit was folded into the International System of Units in 1971, gradually displacing "mho" in textbooks, standards, and datasheets over the following decades. The two units remain numerically identical (1 mho = 1 S), so older equipment and literature that still uses "mho" converts to the modern siemens with a factor of exactly 1.

Example

A conductance of 1 kS equals 1E+09 µS. For scale, a typical incandescent light bulb filament has a conductance around 0.08 siemens (roughly 12 ohms of resistance), a thick copper ground strap can exceed several thousand siemens, and a high-quality electrical insulator's leakage conductance is often measured in picosiemens or smaller.

Frequently Asked Questions

How many Microsiemens are in 1 Kilosiemens?

1 Kilosiemens (kS) equals exactly 1E+09 Microsiemens (µS).

What is the difference between conductance and conductivity?

Conductance (siemens) describes a specific object or component's ability to conduct current — it depends on that object's size, shape, and material. Conductivity (siemens per meter) is a material property that strips out size and shape, describing how well a material conducts current per unit length regardless of the particular sample. Use this converter for whole-component conductance; use the companion Electric Conductivity Converter for the size-independent material property.

Is mho the same as siemens?

Yes — mho and siemens are numerically identical (1 mho = 1 S). "Mho" was the informal, widely used name for the unit before the International Electrotechnical Commission standardized "siemens" in 1935, and it still appears in older equipment, textbooks, and some U.S. water-quality literature.

Why is the quantized Hall conductance such a small, oddly specific number?

The quantized Hall conductance (e²/h ≈ 3.87405 × 10⁻⁵ S) is a fundamental physical constant, not a rounded engineering unit — it's built from the elementary charge (e) and the Planck constant (h). Discovered by Klaus von Klitzing in 1980, it's the exact step size by which conductance jumps in the quantum Hall effect, and because it depends only on fundamental constants, it's used today as a precision reference for realizing the ohm and siemens in metrology labs.

What are abmho and statmho used for today?

Abmho (from the CGS-EMU system) and statmho (from the CGS-ESU system) are both 19th-century units of conductance that predate the SI. They're rarely used in modern engineering, but still appear occasionally in historical physics literature and in theoretical work that frames electromagnetic calculations natively in CGS units rather than SI.

Convert Kilosiemens to Other Electric Conductance Units

Possible Electric Conductance Conversions

Megasiemens to Millisiemens Mho to Megasiemens Ampere/Volt to Millisiemens Microsiemens to Amperes/Volt Micromho to Abmhos Siemens to Abmhos Megasiemens to Kilosiemens Millisiemens to Mhos Abmho to Statmhos Ampere/Volt to Quantized Hall Conductances Micromho to Amperes/Volt Megasiemens to Micromhos Statmho to Kilosiemens Micromho to Kilosiemens Megasiemens to Mhos Ampere/Volt to Microsiemens Gemmho to Microsiemens Megasiemens to Gemmhos Kilosiemens to Statmhos Abmho to Kilosiemens Ampere/Volt to Gemmhos Gemmho to Kilosiemens Mho to Kilosiemens Micromho to Quantized Hall Conductances Megasiemens to Amperes/Volt Kilosiemens to Micromhos Micromho to Microsiemens Gemmho to Micromhos Megasiemens to Statmhos Siemens to Micromhos Kilosiemens to Gemmhos Micromho to Millisiemens Microsiemens to Kilosiemens Siemens to Gemmhos Quantized Hall Conductance to Micromhos Micromho to Mhos Gemmho to Quantized Hall Conductances Abmho to Siemens Abmho to Megasiemens Millisiemens to Microsiemens Microsiemens to Mhos Micromho to Siemens Mho to Microsiemens Ampere/Volt to Statmhos Quantized Hall Conductance to Amperes/Volt Microsiemens to Millisiemens Ampere/Volt to Siemens Siemens to Millisiemens Siemens to Megasiemens Kilosiemens to Quantized Hall Conductances Quantized Hall Conductance to Microsiemens Micromho to Gemmhos Siemens to Kilosiemens Ampere/Volt to Mhos Microsiemens to Statmhos Siemens to Amperes/Volt Megasiemens to Abmhos Abmho to Amperes/Volt Statmho to Megasiemens Quantized Hall Conductance to Kilosiemens Millisiemens to Kilosiemens Siemens to Mhos Abmho to Mhos Quantized Hall Conductance to Gemmhos Millisiemens to Quantized Hall Conductances Micromho to Megasiemens Microsiemens to Megasiemens Mho to Micromhos Statmho to Abmhos Kilosiemens to Abmhos Millisiemens to Siemens Statmho to Millisiemens Ampere/Volt to Kilosiemens Statmho to Mhos Millisiemens to Micromhos Mho to Quantized Hall Conductances Abmho to Microsiemens Kilosiemens to Microsiemens Siemens to Microsiemens Mho to Gemmhos Kilosiemens to Millisiemens Gemmho to Statmhos Gemmho to Millisiemens Quantized Hall Conductance to Siemens Megasiemens to Microsiemens Mho to Siemens Megasiemens to Siemens Ampere/Volt to Megasiemens Gemmho to Amperes/Volt Mho to Statmhos Millisiemens to Abmhos Siemens to Statmhos Kilosiemens to Megasiemens Abmho to Gemmhos Kilosiemens to Amperes/Volt Millisiemens to Gemmhos Abmho to Micromhos Microsiemens to Siemens Ampere/Volt to Abmhos Siemens to Quantized Hall Conductances Microsiemens to Quantized Hall Conductances Gemmho to Megasiemens Micromho to Statmhos Kilosiemens to Mhos Microsiemens to Micromhos Millisiemens to Megasiemens Abmho to Quantized Hall Conductances Statmho to Amperes/Volt Statmho to Micromhos Gemmho to Siemens Mho to Abmhos Quantized Hall Conductance to Megasiemens Millisiemens to Amperes/Volt Gemmho to Abmhos Abmho to Millisiemens Microsiemens to Abmhos Microsiemens to Gemmhos Statmho to Gemmhos Statmho to Siemens Ampere/Volt to Micromhos Mho to Millisiemens Statmho to Quantized Hall Conductances Megasiemens to Quantized Hall Conductances Quantized Hall Conductance to Millisiemens Statmho to Microsiemens Millisiemens to Statmhos Kilosiemens to Siemens Mho to Amperes/Volt Quantized Hall Conductance to Abmhos Quantized Hall Conductance to Mhos Gemmho to Mhos Quantized Hall Conductance to Statmhos

See also