CalculatorBoom

Convert Twips to Ens

Twip (twip) to En (en) typography conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Twip = 0.100375 Ens

1 En = 9.9626401 Twips

1 twip in every supported unit

Conversion chart: Twip to Ens

Conversion table

Twip (twip) En (en)
0.01 twip 0.00100375 en
0.1 twip 0.0100375 en
1 twip 0.100375 en
2 twip 0.20075 en
3 twip 0.301125 en
5 twip 0.501875 en
10 twip 1.00375 en
20 twip 2.0075 en
50 twip 5.01875 en
100 twip 10.0375 en
1000 twip 100.375 en

Twip (twip)

Definition: A "twentieth of a point" — exactly 1/1440 of an inch (1/20 of a computer point) — used as a fine-grained, integer-friendly unit for positioning text and graphics in page-layout software.

History: Introduced by Microsoft in the 1980s for Windows' GDI graphics subsystem and later adopted as the native measurement unit of the Rich Text Format (RTF), because its small size lets layout coordinates be stored as whole numbers instead of fractional points.

Current use: Still the internal unit used by RTF documents, Windows GDI drawing calls, and Microsoft Office's layout engine wherever precise sub-pixel text and object positioning is required.

En (en)

Definition: A font-relative typographic unit traditionally equal to half an em (roughly the width of a lowercase "n" in the current typeface), used for fine-grained spacing such as en-dashes and en-spaces.

History: Inherited from centuries of metal-type printing tradition, where the em and en were defined relative to the type body size being set rather than as fixed physical measurements.

Current use: Still used in typography today for the en-dash (–) and en-space, and in the traditional printing convention of measuring line indents and word spacing relative to the current font size.

Supported Units

Unit Symbol In Twip
Twip twip 1 twip
Meter m 56692.913 twip
Centimeter cm 566.92913 twip
Millimeter mm 56.692913 twip
Character (X) char (X) 120 twip
Character (Y) char (Y) 240 twip
Pixel (X) px (X) 15 twip
Pixel (Y) px (Y) 15 twip
Inch in 1440 twip
Pica (Computer) pica 240 twip
Pica (Printer's) pica (pr) 239.10336 twip
PostScript Point pt (PS) 20 twip
Point (Computer) pt 20 twip
Point (Printer's) pt (pr) 19.92528 twip
En en 9.9626401 twip

About These Parameters

Value
The typographic measurement you want to convert, expressed in the "From" unit — a font size in points, a margin in inches or millimeters, or a layout coordinate in twips.
From Unit
The unit your value is currently measured in — an RTF document's twip coordinate, a font size in computer points, or a physical page dimension in inches or centimeters.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, handy when moving between a print-trade unit like the pica and a physical unit like the inch.

How Typography Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the twip. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Twip → En: multiply by 0.100375. For example, 1 twip × 0.100375 = 0.100375 en.

Points and Picas: From Metal Type to Digital Type

Before desktop publishing, printers worked in the Anglo-American point system standardized by 19th-century type foundries, where a point measured roughly 1/72.27 of an inch and a pica was 12 of those points. When Adobe introduced PostScript in 1982, it rounded the point to a much cleaner exactly 1/72 of an inch — the "computer point" (and computer pica, exactly 1/6 inch) used by virtually every modern design and word-processing application. The tiny difference between the two (about 0.3%) rarely matters for everyday layout work, but this converter keeps both available since historical typesetting records still use the older printer's point and pica.

Why Windows and RTF Use the Twip

Microsoft introduced the twip for Windows' GDI graphics subsystem and the Rich Text Format in the 1980s specifically because 1/1440 of an inch is small enough to place text and graphics with sub-pixel precision while still being a whole number for almost any practical page coordinate — a working unit that avoids the rounding errors floating-point point or pica values would introduce into a document's internal layout data. That's why RTF files and Windows layout APIs still store every coordinate in twips today, even though no one designs directly in twips the way they think in points or inches.

Example

1 twip equals 0.100375 en. For scale, a standard 12-point font size is exactly 240 twips, a 1-inch page margin is 1,440 twips (or 6 computer picas), and US Letter paper (8.5 × 11 inches) measures 12,240 by 15,840 twips.

Frequently Asked Questions

How many Ens are in 1 Twip?

1 Twip (twip) equals exactly 0.100375 Ens (en).

What is a twip and why does it matter?

A twip ("twentieth of a point") is 1/1440 of an inch — small enough for precise text and object placement, yet still a whole number for nearly any practical layout coordinate. It's the native internal unit of RTF documents and the Windows GDI graphics subsystem, so converting to and from twips matters whenever you're working with document layout data programmatically.

What's the difference between a computer point and a printer's point?

The computer (PostScript) point is exactly 1/72 of an inch, standardized by Adobe in 1982 for digital typesetting. The older printer's point, from the metal-type era, is about 1/72.27 of an inch — very slightly smaller than 1/72. The difference is under half a percent, but it's why historical typesetting measurements don't translate exactly onto modern digital point sizes.

How many points are in a pica?

A pica is always 12 points — this ratio holds for both the computer pica/point pair (12 × 1/72 inch = 1/6 inch) and the older printer's pica/point pair (12 × ~1/72.27 inch), so as long as you don't mix the computer and printer's versions, the "12 points per pica" rule always applies.

Are the character and pixel units exact?

No — character units are an approximation based on average character-cell size in a monospaced font, and the pixel units here assume the traditional 96-dots-per-inch Windows screen convention (1440 twips per inch ÷ 96 pixels per inch = 15 twips per pixel). Actual character widths vary by font, and actual screen pixel density varies by display, so treat these two as legacy approximations rather than physically exact measurements.

Convert Twip to Other Typography Units

Possible Typography Conversions

Twip to Pixels (X) Pica (Printer's) to Millimeters Character (X) to Points (Printer's) Point (Computer) to Inches Pica (Printer's) to Pixels (Y) Point (Computer) to Picas (Printer's) Point (Printer's) to Characters (X) Pica (Computer) to PostScript Points Twip to Inches Centimeter to Inches Character (X) to Points (Computer) Point (Printer's) to Inches PostScript Point to Ens Inch to Ens Inch to Picas (Printer's) Inch to Millimeters Inch to Characters (Y) Pica (Computer) to Millimeters Pica (Computer) to Characters (X) Character (X) to Ens Pica (Computer) to Inches Point (Printer's) to Twips Twip to Points (Printer's) Millimeter to Pixels (Y) Meter to Picas (Printer's) Pica (Computer) to Twips Pica (Printer's) to Characters (X) Pixel (X) to Millimeters Point (Printer's) to Millimeters Point (Computer) to Characters (Y) Centimeter to Picas (Computer) Meter to Points (Computer) Pica (Computer) to Points (Printer's) Point (Computer) to Points (Printer's) Point (Computer) to Centimeters Pixel (X) to Characters (X) Pixel (Y) to Ens Meter to Inches Point (Printer's) to Points (Computer) Pixel (X) to Picas (Computer) Millimeter to Pixels (X) En to Millimeters Centimeter to Meters Point (Computer) to Ens Meter to Millimeters Point (Printer's) to Meters PostScript Point to Meters Character (X) to Characters (Y) Pixel (X) to Ens Millimeter to Centimeters Point (Printer's) to Pixels (X) Centimeter to Points (Printer's) Point (Computer) to Twips Pixel (X) to Meters Twip to Ens Pixel (Y) to Millimeters Pixel (Y) to Pixels (X) Meter to Picas (Computer) Character (X) to Millimeters Character (X) to PostScript Points Point (Printer's) to Picas (Computer) PostScript Point to Millimeters En to Picas (Computer) Inch to Points (Computer) Pica (Printer's) to Ens Pixel (X) to Points (Computer) Pixel (Y) to Twips Twip to Characters (X) Meter to Pixels (Y) PostScript Point to Picas (Printer's) Centimeter to Characters (X) Character (Y) to Picas (Printer's) Character (X) to Meters En to Points (Computer) Inch to Picas (Computer) Pixel (Y) to Picas (Printer's) Pixel (X) to Centimeters PostScript Point to Pixels (Y) En to Centimeters PostScript Point to Centimeters Character (Y) to Ens En to Pixels (Y) Pica (Printer's) to Meters Pica (Printer's) to PostScript Points Meter to Centimeters Meter to Characters (Y) Point (Computer) to Meters Centimeter to Points (Computer) Centimeter to Pixels (X) Millimeter to Picas (Printer's) Point (Computer) to Millimeters Meter to PostScript Points Pica (Printer's) to Points (Printer's) Point (Computer) to PostScript Points Inch to Characters (X) Millimeter to Twips Millimeter to Characters (X) Twip to Characters (Y) Millimeter to Points (Printer's) Pixel (X) to Inches Pixel (X) to Pixels (Y) Meter to Ens Point (Computer) to Characters (X) Inch to Points (Printer's) PostScript Point to Points (Computer) Point (Printer's) to Characters (Y) Centimeter to PostScript Points Pixel (Y) to Points (Printer's) Millimeter to Picas (Computer) Inch to Centimeters Twip to PostScript Points Millimeter to Meters Pica (Printer's) to Points (Computer) Centimeter to Pixels (Y) En to Characters (X) Point (Computer) to Picas (Computer) PostScript Point to Twips En to Characters (Y) Character (Y) to Inches Pixel (X) to Characters (Y) PostScript Point to Characters (Y) Pixel (Y) to PostScript Points Pica (Printer's) to Characters (Y) Pixel (Y) to Characters (X) Pica (Computer) to Pixels (Y) Character (Y) to Pixels (Y) En to Pixels (X) Point (Printer's) to Picas (Printer's) PostScript Point to Pixels (X) Pixel (X) to Picas (Printer's) Character (Y) to Meters Character (Y) to Points (Printer's) Character (X) to Inches En to Twips Pixel (Y) to Characters (Y) Point (Printer's) to Ens Twip to Millimeters En to Meters Inch to Pixels (Y) Point (Printer's) to Centimeters Pixel (Y) to Points (Computer) Character (X) to Centimeters Inch to PostScript Points Centimeter to Characters (Y) Millimeter to Inches Millimeter to PostScript Points Meter to Pixels (X) Pixel (X) to Points (Printer's) Meter to Points (Printer's) Meter to Twips Character (Y) to PostScript Points Twip to Pixels (Y) Twip to Picas (Computer) Character (X) to Pixels (Y) Meter to Characters (X) Character (Y) to Centimeters Character (Y) to Millimeters Point (Computer) to Pixels (Y) Pica (Computer) to Ens Centimeter to Millimeters Character (X) to Pixels (X) Point (Printer's) to PostScript Points Centimeter to Twips Pica (Computer) to Points (Computer) Pixel (X) to PostScript Points Pixel (Y) to Picas (Computer) Pica (Computer) to Centimeters En to PostScript Points Pica (Computer) to Pixels (X) Character (Y) to Points (Computer) Twip to Picas (Printer's) Pica (Printer's) to Centimeters Centimeter to Picas (Printer's) PostScript Point to Picas (Computer) Character (X) to Twips Pixel (Y) to Meters Character (X) to Picas (Computer) Pixel (X) to Twips Twip to Points (Computer) Point (Printer's) to Pixels (Y) Inch to Meters Inch to Twips Pixel (Y) to Inches Character (X) to Picas (Printer's) Pica (Computer) to Characters (Y) Pica (Printer's) to Picas (Computer) Character (Y) to Pixels (X) Character (Y) to Picas (Computer) Millimeter to Characters (Y) PostScript Point to Inches PostScript Point to Characters (X) En to Picas (Printer's) Character (Y) to Twips Centimeter to Ens Point (Computer) to Pixels (X) PostScript Point to Points (Printer's) Pixel (Y) to Centimeters Twip to Centimeters Pica (Printer's) to Inches Pica (Computer) to Meters Pica (Printer's) to Twips En to Inches Millimeter to Points (Computer) En to Points (Printer's) Character (Y) to Characters (X) Millimeter to Ens Inch to Pixels (X) Pica (Computer) to Picas (Printer's) Twip to Meters Pica (Printer's) to Pixels (X)

See also