CalculatorBoom

Convert Twips to Characters (X)

Twip (twip) to Character (X) (char (X)) typography conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Twip = 0.0083333333 Characters (X)

1 Character (X) = 120 Twips

1 twip in every supported unit

Conversion chart: Twip to Characters (X)

Conversion table

Twip (twip) Character (X) (char (X))
0.01 twip 8.33333E-05 char (X)
0.1 twip 0.00083333333 char (X)
1 twip 0.0083333333 char (X)
2 twip 0.016666667 char (X)
3 twip 0.025 char (X)
5 twip 0.041666667 char (X)
10 twip 0.083333333 char (X)
20 twip 0.16666667 char (X)
50 twip 0.41666667 char (X)
100 twip 0.83333333 char (X)
1000 twip 8.3333333 char (X)

Twip (twip)

Definition: A "twentieth of a point" — exactly 1/1440 of an inch (1/20 of a computer point) — used as a fine-grained, integer-friendly unit for positioning text and graphics in page-layout software.

History: Introduced by Microsoft in the 1980s for Windows' GDI graphics subsystem and later adopted as the native measurement unit of the Rich Text Format (RTF), because its small size lets layout coordinates be stored as whole numbers instead of fractional points.

Current use: Still the internal unit used by RTF documents, Windows GDI drawing calls, and Microsoft Office's layout engine wherever precise sub-pixel text and object positioning is required.

Character (X) (char (X))

Definition: An approximate horizontal text-grid unit representing the average width of one character cell, used by legacy word-processor and terminal-style layout code that positions text by character column rather than physical distance.

History: This convention grew out of monospaced-font typewriter and early word-processor layouts, where document position was naturally expressed in character columns and rows rather than physical measurements — early tools like WordStar and DOS-era editors positioned everything this way.

Current use: Still used in legacy document-conversion and terminal-emulator layout code that needs to translate a "column position" into a physical or twip-based coordinate for rendering.

Supported Units

Unit Symbol In Twip
Twip twip 1 twip
Meter m 56692.913 twip
Centimeter cm 566.92913 twip
Millimeter mm 56.692913 twip
Character (X) char (X) 120 twip
Character (Y) char (Y) 240 twip
Pixel (X) px (X) 15 twip
Pixel (Y) px (Y) 15 twip
Inch in 1440 twip
Pica (Computer) pica 240 twip
Pica (Printer's) pica (pr) 239.10336 twip
PostScript Point pt (PS) 20 twip
Point (Computer) pt 20 twip
Point (Printer's) pt (pr) 19.92528 twip
En en 9.9626401 twip

About These Parameters

Value
The typographic measurement you want to convert, expressed in the "From" unit — a font size in points, a margin in inches or millimeters, or a layout coordinate in twips.
From Unit
The unit your value is currently measured in — an RTF document's twip coordinate, a font size in computer points, or a physical page dimension in inches or centimeters.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, handy when moving between a print-trade unit like the pica and a physical unit like the inch.

How Typography Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the twip. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Twip → Character (X): multiply by 0.0083333333. For example, 1 twip × 0.0083333333 = 0.0083333333 char (X).

Points and Picas: From Metal Type to Digital Type

Before desktop publishing, printers worked in the Anglo-American point system standardized by 19th-century type foundries, where a point measured roughly 1/72.27 of an inch and a pica was 12 of those points. When Adobe introduced PostScript in 1982, it rounded the point to a much cleaner exactly 1/72 of an inch — the "computer point" (and computer pica, exactly 1/6 inch) used by virtually every modern design and word-processing application. The tiny difference between the two (about 0.3%) rarely matters for everyday layout work, but this converter keeps both available since historical typesetting records still use the older printer's point and pica.

Why Windows and RTF Use the Twip

Microsoft introduced the twip for Windows' GDI graphics subsystem and the Rich Text Format in the 1980s specifically because 1/1440 of an inch is small enough to place text and graphics with sub-pixel precision while still being a whole number for almost any practical page coordinate — a working unit that avoids the rounding errors floating-point point or pica values would introduce into a document's internal layout data. That's why RTF files and Windows layout APIs still store every coordinate in twips today, even though no one designs directly in twips the way they think in points or inches.

Example

1 twip equals 0.0083333333 char (X). For scale, a standard 12-point font size is exactly 240 twips, a 1-inch page margin is 1,440 twips (or 6 computer picas), and US Letter paper (8.5 × 11 inches) measures 12,240 by 15,840 twips.

Frequently Asked Questions

How many Characters (X) are in 1 Twip?

1 Twip (twip) equals exactly 0.0083333333 Characters (X) (char (X)).

What is a twip and why does it matter?

A twip ("twentieth of a point") is 1/1440 of an inch — small enough for precise text and object placement, yet still a whole number for nearly any practical layout coordinate. It's the native internal unit of RTF documents and the Windows GDI graphics subsystem, so converting to and from twips matters whenever you're working with document layout data programmatically.

What's the difference between a computer point and a printer's point?

The computer (PostScript) point is exactly 1/72 of an inch, standardized by Adobe in 1982 for digital typesetting. The older printer's point, from the metal-type era, is about 1/72.27 of an inch — very slightly smaller than 1/72. The difference is under half a percent, but it's why historical typesetting measurements don't translate exactly onto modern digital point sizes.

How many points are in a pica?

A pica is always 12 points — this ratio holds for both the computer pica/point pair (12 × 1/72 inch = 1/6 inch) and the older printer's pica/point pair (12 × ~1/72.27 inch), so as long as you don't mix the computer and printer's versions, the "12 points per pica" rule always applies.

Are the character and pixel units exact?

No — character units are an approximation based on average character-cell size in a monospaced font, and the pixel units here assume the traditional 96-dots-per-inch Windows screen convention (1440 twips per inch ÷ 96 pixels per inch = 15 twips per pixel). Actual character widths vary by font, and actual screen pixel density varies by display, so treat these two as legacy approximations rather than physically exact measurements.

Convert Twip to Other Typography Units

Possible Typography Conversions

Pixel (X) to Twips Millimeter to Pixels (X) Point (Computer) to Picas (Printer's) Centimeter to Millimeters Millimeter to Points (Computer) Character (X) to Twips Meter to Pixels (Y) Character (X) to Points (Computer) Pixel (X) to Millimeters Pica (Printer's) to Points (Printer's) Point (Printer's) to Inches PostScript Point to Characters (Y) PostScript Point to Points (Printer's) Inch to Ens Millimeter to Characters (X) Character (X) to Ens Pixel (X) to Pixels (Y) Twip to Points (Computer) Meter to Ens Meter to Twips PostScript Point to Characters (X) Character (X) to Millimeters Millimeter to Characters (Y) Pixel (X) to Picas (Printer's) Pica (Computer) to Pixels (X) Pica (Printer's) to Characters (Y) Character (Y) to Inches Point (Computer) to Pixels (Y) Point (Printer's) to Meters Pixel (Y) to Ens PostScript Point to Centimeters Point (Printer's) to Points (Computer) Pixel (Y) to Points (Computer) Point (Computer) to Characters (X) Character (X) to Picas (Computer) Inch to Points (Printer's) Millimeter to Picas (Printer's) Pica (Computer) to PostScript Points Twip to PostScript Points Point (Printer's) to PostScript Points Character (Y) to Twips Character (X) to PostScript Points Point (Printer's) to Centimeters En to Picas (Printer's) Meter to Inches Character (Y) to Points (Computer) En to Points (Computer) Pixel (X) to Characters (Y) Pica (Printer's) to Points (Computer) PostScript Point to Points (Computer) Meter to Characters (Y) Pixel (X) to Points (Printer's) Pica (Computer) to Picas (Printer's) Twip to Picas (Computer) Pica (Computer) to Centimeters Twip to Points (Printer's) Twip to Picas (Printer's) Millimeter to Points (Printer's) Inch to Meters Centimeter to Characters (X) En to Characters (Y) Pica (Computer) to Inches Point (Printer's) to Ens Pica (Computer) to Twips Pica (Computer) to Millimeters Meter to Millimeters Point (Computer) to Pixels (X) Millimeter to Centimeters Pixel (Y) to Twips En to Points (Printer's) Pixel (Y) to Characters (Y) Twip to Ens Millimeter to Inches Pixel (X) to Points (Computer) PostScript Point to Picas (Printer's) Point (Computer) to Characters (Y) Character (Y) to Millimeters PostScript Point to Ens Centimeter to Points (Printer's) Inch to Picas (Computer) Millimeter to Twips Point (Printer's) to Twips Centimeter to Inches PostScript Point to Millimeters Centimeter to Twips Pica (Printer's) to Meters Point (Printer's) to Characters (Y) Point (Printer's) to Picas (Printer's) Meter to PostScript Points Point (Printer's) to Picas (Computer) Twip to Pixels (X) Inch to Characters (Y) Pica (Printer's) to Pixels (Y) En to PostScript Points Pixel (X) to PostScript Points Pica (Computer) to Ens Point (Computer) to Centimeters Centimeter to Picas (Printer's) Pica (Printer's) to Ens Inch to Points (Computer) Character (Y) to Meters Meter to Pixels (X) Millimeter to Ens Character (Y) to Centimeters Pica (Printer's) to Millimeters Pica (Printer's) to PostScript Points Meter to Picas (Printer's) Centimeter to Picas (Computer) Inch to Centimeters Point (Computer) to Twips Twip to Millimeters Character (X) to Pixels (X) Character (Y) to Pixels (Y) En to Meters PostScript Point to Twips Pixel (X) to Centimeters Pixel (X) to Characters (X) Point (Computer) to Picas (Computer) Pica (Computer) to Characters (Y) Inch to Pixels (Y) Pica (Printer's) to Pixels (X) Inch to Twips Pixel (X) to Ens Pixel (Y) to Centimeters Meter to Centimeters Millimeter to Picas (Computer) Pica (Computer) to Meters Pixel (Y) to Meters Character (Y) to Ens En to Pixels (Y) Pixel (Y) to Points (Printer's) Meter to Points (Computer) PostScript Point to Pixels (X) Pica (Printer's) to Twips Pixel (Y) to Pixels (X) Point (Printer's) to Pixels (Y) Twip to Characters (X) En to Inches En to Pixels (X) En to Millimeters Character (Y) to Picas (Printer's) Character (Y) to PostScript Points Point (Computer) to PostScript Points Inch to PostScript Points PostScript Point to Pixels (Y) Character (X) to Picas (Printer's) Meter to Points (Printer's) Point (Computer) to Inches Pica (Printer's) to Inches Millimeter to Meters Pica (Printer's) to Characters (X) Point (Computer) to Points (Printer's) Pica (Computer) to Characters (X) Point (Computer) to Ens Character (Y) to Characters (X) Pica (Computer) to Pixels (Y) Pixel (Y) to Picas (Computer) Character (Y) to Points (Printer's) Pica (Computer) to Points (Printer's) Millimeter to PostScript Points Centimeter to Meters Pica (Printer's) to Centimeters Centimeter to PostScript Points Twip to Characters (Y) Centimeter to Pixels (Y) Point (Printer's) to Millimeters Twip to Centimeters Character (Y) to Pixels (X) Character (Y) to Picas (Computer) Character (X) to Points (Printer's) Point (Computer) to Millimeters Twip to Pixels (Y) Pixel (Y) to Inches PostScript Point to Picas (Computer) Character (X) to Characters (Y) Pixel (Y) to Picas (Printer's) Twip to Meters Inch to Characters (X) Point (Computer) to Meters En to Characters (X) En to Twips Character (X) to Centimeters Pixel (X) to Meters Character (X) to Pixels (Y) Inch to Millimeters Character (X) to Inches Character (X) to Meters Pixel (Y) to Millimeters Point (Printer's) to Characters (X) Pica (Computer) to Points (Computer) Meter to Characters (X) Centimeter to Points (Computer) Millimeter to Pixels (Y) Pixel (X) to Picas (Computer) Centimeter to Pixels (X) Point (Printer's) to Pixels (X) Pixel (Y) to Characters (X) Inch to Picas (Printer's) Pixel (Y) to PostScript Points Centimeter to Characters (Y) Meter to Picas (Computer) Pica (Printer's) to Picas (Computer) Centimeter to Ens Inch to Pixels (X) En to Picas (Computer) Twip to Inches En to Centimeters PostScript Point to Inches PostScript Point to Meters Pixel (X) to Inches

See also