CalculatorBoom

Convert Twips to Characters (Y)

Twip (twip) to Character (Y) (char (Y)) typography conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 Twip = 0.0041666667 Characters (Y)

1 Character (Y) = 240 Twips

1 twip in every supported unit

Conversion chart: Twip to Characters (Y)

Conversion table

Twip (twip) Character (Y) (char (Y))
0.01 twip 4.16667E-05 char (Y)
0.1 twip 0.00041666667 char (Y)
1 twip 0.0041666667 char (Y)
2 twip 0.0083333333 char (Y)
3 twip 0.0125 char (Y)
5 twip 0.020833333 char (Y)
10 twip 0.041666667 char (Y)
20 twip 0.083333333 char (Y)
50 twip 0.20833333 char (Y)
100 twip 0.41666667 char (Y)
1000 twip 4.1666667 char (Y)

Twip (twip)

Definition: A "twentieth of a point" — exactly 1/1440 of an inch (1/20 of a computer point) — used as a fine-grained, integer-friendly unit for positioning text and graphics in page-layout software.

History: Introduced by Microsoft in the 1980s for Windows' GDI graphics subsystem and later adopted as the native measurement unit of the Rich Text Format (RTF), because its small size lets layout coordinates be stored as whole numbers instead of fractional points.

Current use: Still the internal unit used by RTF documents, Windows GDI drawing calls, and Microsoft Office's layout engine wherever precise sub-pixel text and object positioning is required.

Character (Y) (char (Y))

Definition: An approximate vertical text-grid unit representing the height of one character row (roughly twice the horizontal character unit, matching typical line spacing), used the same way as Character (X) but for vertical position.

History: Paired with Character (X) in the same legacy character-grid layout conventions from typewriter-style and early word-processing software.

Current use: Used alongside Character (X) whenever legacy layout code expresses a text position as a row/column pair that needs converting into physical or twip units.

Supported Units

Unit Symbol In Twip
Twip twip 1 twip
Meter m 56692.913 twip
Centimeter cm 566.92913 twip
Millimeter mm 56.692913 twip
Character (X) char (X) 120 twip
Character (Y) char (Y) 240 twip
Pixel (X) px (X) 15 twip
Pixel (Y) px (Y) 15 twip
Inch in 1440 twip
Pica (Computer) pica 240 twip
Pica (Printer's) pica (pr) 239.10336 twip
PostScript Point pt (PS) 20 twip
Point (Computer) pt 20 twip
Point (Printer's) pt (pr) 19.92528 twip
En en 9.9626401 twip

About These Parameters

Value
The typographic measurement you want to convert, expressed in the "From" unit — a font size in points, a margin in inches or millimeters, or a layout coordinate in twips.
From Unit
The unit your value is currently measured in — an RTF document's twip coordinate, a font size in computer points, or a physical page dimension in inches or centimeters.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly, handy when moving between a print-trade unit like the pica and a physical unit like the inch.

How Typography Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the twip. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Twip → Character (Y): multiply by 0.0041666667. For example, 1 twip × 0.0041666667 = 0.0041666667 char (Y).

Points and Picas: From Metal Type to Digital Type

Before desktop publishing, printers worked in the Anglo-American point system standardized by 19th-century type foundries, where a point measured roughly 1/72.27 of an inch and a pica was 12 of those points. When Adobe introduced PostScript in 1982, it rounded the point to a much cleaner exactly 1/72 of an inch — the "computer point" (and computer pica, exactly 1/6 inch) used by virtually every modern design and word-processing application. The tiny difference between the two (about 0.3%) rarely matters for everyday layout work, but this converter keeps both available since historical typesetting records still use the older printer's point and pica.

Why Windows and RTF Use the Twip

Microsoft introduced the twip for Windows' GDI graphics subsystem and the Rich Text Format in the 1980s specifically because 1/1440 of an inch is small enough to place text and graphics with sub-pixel precision while still being a whole number for almost any practical page coordinate — a working unit that avoids the rounding errors floating-point point or pica values would introduce into a document's internal layout data. That's why RTF files and Windows layout APIs still store every coordinate in twips today, even though no one designs directly in twips the way they think in points or inches.

Example

1 twip equals 0.0041666667 char (Y). For scale, a standard 12-point font size is exactly 240 twips, a 1-inch page margin is 1,440 twips (or 6 computer picas), and US Letter paper (8.5 × 11 inches) measures 12,240 by 15,840 twips.

Frequently Asked Questions

How many Characters (Y) are in 1 Twip?

1 Twip (twip) equals exactly 0.0041666667 Characters (Y) (char (Y)).

What is a twip and why does it matter?

A twip ("twentieth of a point") is 1/1440 of an inch — small enough for precise text and object placement, yet still a whole number for nearly any practical layout coordinate. It's the native internal unit of RTF documents and the Windows GDI graphics subsystem, so converting to and from twips matters whenever you're working with document layout data programmatically.

What's the difference between a computer point and a printer's point?

The computer (PostScript) point is exactly 1/72 of an inch, standardized by Adobe in 1982 for digital typesetting. The older printer's point, from the metal-type era, is about 1/72.27 of an inch — very slightly smaller than 1/72. The difference is under half a percent, but it's why historical typesetting measurements don't translate exactly onto modern digital point sizes.

How many points are in a pica?

A pica is always 12 points — this ratio holds for both the computer pica/point pair (12 × 1/72 inch = 1/6 inch) and the older printer's pica/point pair (12 × ~1/72.27 inch), so as long as you don't mix the computer and printer's versions, the "12 points per pica" rule always applies.

Are the character and pixel units exact?

No — character units are an approximation based on average character-cell size in a monospaced font, and the pixel units here assume the traditional 96-dots-per-inch Windows screen convention (1440 twips per inch ÷ 96 pixels per inch = 15 twips per pixel). Actual character widths vary by font, and actual screen pixel density varies by display, so treat these two as legacy approximations rather than physically exact measurements.

Convert Twip to Other Typography Units

Possible Typography Conversions

Pica (Printer's) to Inches Millimeter to Picas (Printer's) Character (X) to Picas (Computer) Pica (Printer's) to Characters (Y) Pixel (Y) to Centimeters En to Meters Pica (Printer's) to Points (Computer) En to Picas (Computer) En to Millimeters Pica (Printer's) to Twips Twip to PostScript Points Meter to Characters (X) Character (X) to Inches Point (Printer's) to Characters (Y) Pica (Printer's) to Pixels (Y) Pixel (Y) to Pixels (X) Twip to Picas (Printer's) Point (Printer's) to Characters (X) En to Characters (X) Twip to Points (Computer) Meter to Ens Centimeter to Picas (Computer) Pica (Printer's) to PostScript Points PostScript Point to Meters Pica (Computer) to Characters (X) Pixel (Y) to Twips Character (X) to Meters Pica (Computer) to Twips Pixel (X) to Characters (X) Pixel (Y) to Picas (Printer's) Millimeter to Points (Computer) Point (Computer) to PostScript Points Point (Computer) to Twips Centimeter to Picas (Printer's) Inch to Points (Printer's) Twip to Centimeters PostScript Point to Pixels (X) Character (Y) to Millimeters PostScript Point to Ens Pixel (X) to Points (Printer's) Millimeter to Pixels (X) Character (Y) to Pixels (Y) Centimeter to PostScript Points Pixel (X) to Pixels (Y) Twip to Pixels (X) Character (X) to PostScript Points Character (X) to Pixels (X) Centimeter to Points (Printer's) Pixel (X) to Ens Centimeter to Characters (Y) Point (Printer's) to Picas (Computer) PostScript Point to Characters (Y) Point (Printer's) to PostScript Points Pixel (X) to PostScript Points Inch to Twips Millimeter to Meters Point (Printer's) to Ens PostScript Point to Centimeters Meter to Pixels (X) PostScript Point to Millimeters Inch to Characters (X) Character (X) to Centimeters Meter to Picas (Printer's) Point (Printer's) to Meters Character (Y) to Centimeters Meter to Centimeters Pica (Printer's) to Characters (X) Centimeter to Meters Character (X) to Pixels (Y) En to Points (Computer) En to Centimeters Point (Computer) to Pixels (X) PostScript Point to Picas (Printer's) Pixel (X) to Points (Computer) Meter to Millimeters Character (X) to Points (Computer) Point (Printer's) to Pixels (X) Character (Y) to Points (Printer's) Pica (Printer's) to Centimeters Inch to Picas (Printer's) Pixel (X) to Characters (Y) Point (Computer) to Meters Pica (Printer's) to Points (Printer's) Point (Printer's) to Millimeters Pixel (Y) to Characters (X) Character (X) to Points (Printer's) Point (Printer's) to Inches Pixel (X) to Twips En to Pixels (X) Inch to Picas (Computer) Millimeter to Centimeters Point (Printer's) to Centimeters Character (Y) to Twips Pixel (Y) to Picas (Computer) Twip to Inches Twip to Pixels (Y) Meter to Inches Pica (Computer) to Picas (Printer's) Point (Printer's) to Pixels (Y) PostScript Point to Pixels (Y) Character (Y) to Characters (X) Character (Y) to Points (Computer) En to Picas (Printer's) Pica (Computer) to Inches Inch to Meters Character (Y) to Ens Character (Y) to Pixels (X) Centimeter to Pixels (Y) Meter to Pixels (Y) Point (Printer's) to Twips Millimeter to Characters (X) Point (Printer's) to Picas (Printer's) Twip to Characters (Y) Pixel (X) to Picas (Computer) Inch to Points (Computer) Point (Computer) to Ens Centimeter to Inches Character (X) to Picas (Printer's) Pixel (X) to Inches Meter to PostScript Points Centimeter to Characters (X) Pica (Computer) to Characters (Y) Centimeter to Points (Computer) Character (Y) to Picas (Printer's) Pixel (Y) to Millimeters En to PostScript Points Pica (Printer's) to Picas (Computer) Twip to Ens Meter to Twips Centimeter to Pixels (X) Character (Y) to Meters Pica (Computer) to Ens Twip to Meters Inch to Pixels (X) PostScript Point to Picas (Computer) PostScript Point to Inches Character (X) to Millimeters Twip to Points (Printer's) Pixel (X) to Picas (Printer's) Point (Computer) to Points (Printer's) Meter to Points (Printer's) Centimeter to Ens Millimeter to Pixels (Y) Pixel (Y) to Meters Character (X) to Twips Millimeter to Points (Printer's) Character (Y) to Picas (Computer) Point (Computer) to Characters (Y) Inch to Millimeters Centimeter to Millimeters Millimeter to Inches En to Twips Point (Computer) to Millimeters Pica (Computer) to PostScript Points Pixel (Y) to PostScript Points Twip to Millimeters Millimeter to Characters (Y) Centimeter to Twips Point (Computer) to Centimeters PostScript Point to Points (Computer) Character (X) to Characters (Y) Point (Computer) to Characters (X) Inch to Centimeters Pica (Computer) to Centimeters Pica (Printer's) to Pixels (X) Inch to Ens Pica (Computer) to Meters Pixel (Y) to Characters (Y) Meter to Characters (Y) Character (Y) to PostScript Points Inch to Characters (Y) Pica (Computer) to Points (Printer's) Point (Computer) to Inches PostScript Point to Characters (X) Pica (Computer) to Millimeters Point (Computer) to Picas (Printer's) Pica (Computer) to Points (Computer) Pica (Computer) to Pixels (Y) Pica (Printer's) to Meters Pica (Printer's) to Millimeters Character (X) to Ens En to Pixels (Y) En to Characters (Y) PostScript Point to Points (Printer's) Pixel (X) to Meters Inch to Pixels (Y) Millimeter to Picas (Computer) Pixel (Y) to Inches PostScript Point to Twips Twip to Picas (Computer) Point (Printer's) to Points (Computer) Millimeter to Twips Point (Computer) to Picas (Computer) Twip to Characters (X) Inch to PostScript Points Pica (Printer's) to Ens Millimeter to Ens En to Points (Printer's) Pixel (Y) to Ens Meter to Picas (Computer) En to Inches Pixel (X) to Centimeters Pixel (Y) to Points (Computer) Character (Y) to Inches Pixel (X) to Millimeters Pixel (Y) to Points (Printer's) Millimeter to PostScript Points Point (Computer) to Pixels (Y) Meter to Points (Computer) Pica (Computer) to Pixels (X)

See also