Convert Kilograms-force to Metric Tons-force
Kilogram-force (kgf) to Metric Ton-force (tf) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 kgf = 0.001 tf
1 Kilogram-force = 0.001 Metric Tons-force
1 Metric Ton-force = 1000 Kilograms-force
1 kgf in every supported unit
Conversion chart: Kilogram-force to Metric Tons-force
Conversion table
| Kilogram-force (kgf) | Metric Ton-force (tf) |
|---|---|
| 0.01 kgf | 1E-05 tf |
| 0.1 kgf | 0.0001 tf |
| 1 kgf | 0.001 tf |
| 2 kgf | 0.002 tf |
| 3 kgf | 0.003 tf |
| 5 kgf | 0.005 tf |
| 10 kgf | 0.01 tf |
| 20 kgf | 0.02 tf |
| 50 kgf | 0.05 tf |
| 100 kgf | 0.1 tf |
| 1000 kgf | 1 tf |
Kilogram-force (kgf)
Definition: The weight of a 1-kilogram mass under standard Earth gravity (9.80665 m/s²); also called a kilopond (kp) in some European engineering contexts.
History: Part of the older "technical" or "gravitational" metric system used throughout continental Europe before SI was formally adopted in 1960, where forces were measured against a standard weight rather than through Newton's second law directly.
Current use: Still used informally today for bicycle and automotive torque wrench ratings, rocket thrust in some legacy specifications, and consumer product load ratings, even though SI newtons are now the formal engineering standard.
Metric Ton-force (tf)
Definition: The weight of a 1,000-kilogram (one metric ton) mass under standard Earth gravity; equal to exactly 9,806.65 newtons.
History: A scaled-up extension of the kilogram-force within the same pre-SI gravitational metric system, created to express very large forces — crane capacities, ship displacements, press forces — without unwieldy strings of zeros.
Current use: Common today in heavy engineering and industrial contexts such as hydraulic press ratings, crane lifting capacities, and shipping/cargo weight specifications in countries that use the metric system.
Supported Units
| Unit | Symbol | In Newtons |
|---|---|---|
| Newton | N | 1 N |
| Kilonewton | kN | 1000 N |
| Dyne | dyn | 1E-05 N |
| Gram-force | gf | 0.00980665 N |
| Kilogram-force | kgf | 9.80665 N |
| Metric Ton-force | tf | 9806.65 N |
| Pound-force | lbf | 4.4482216 N |
| Ounce-force | ozf | 0.27801385 N |
| Poundal | pdl | 0.13825495 N |
| Kip-force | kip | 4448.2216 N |
About These Parameters
- Value
- The number you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The force unit your input value is currently measured in.
- To Unit
- The force unit you want the result converted into. Use the swap button to flip From and To instantly.
How Force Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the newton. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Kilogram-force → Metric Ton-force: multiply by 0.001. For example, 1 kgf × 0.001 = 0.001 tf.
Force vs. Mass: A Common Point of Confusion
Force and mass are not the same thing, even though units like kilogram-force make them look related. A kilogram is a unit of mass — how much matter an object contains — while a kilogram-force is a unit of force: specifically, the weight (gravitational pull) exerted on a 1 kg mass at Earth's surface. Mass stays the same anywhere in the universe; weight changes with gravity, so a 1 kg mass weighs 1 kgf on Earth but would weigh far less on the Moon. Newtons, pound-force, and the other units on this page all measure force (or weight), never mass.
SI vs. US Customary and Engineering Units
The newton is the SI standard and the default unit in physics, mechanical engineering, and international science everywhere. US structural and civil engineers instead work primarily in pound-force and, for large loads, kips (1,000 lbf) — the customary units baked into American building codes. Kilogram-force and metric ton-force persist informally in parts of Europe and Asia for everyday load ratings even though they were formally superseded by the newton decades ago, and the dyne survives mainly in older CGS-based physics literature and a handful of specialized surface-tension measurements.
Example
1 kgf equals 0.001 tf. For scale, that's about 9.81× the weight of an average apple (roughly 1 N, or 0.10197162 kgf) — and a 150 lb (about 667 N) adult's body weight would be roughly 68.015071 kgf.
Frequently Asked Questions
How many Metric Tons-force are in 1 Kilogram-force?
1 Kilogram-force (kgf) equals exactly 0.001 Metric Tons-force (tf).
What's the difference between kilogram and kilogram-force?
A kilogram measures mass, an intrinsic property of an object that never changes. A kilogram-force measures the weight (force) that Earth's gravity exerts on a 1 kg mass — 9.80665 newtons. The two are related by gravity, not interchangeable, which is why kilogram-force is considered a legacy "gravitational" unit rather than a proper SI unit.
Why do engineers use kips?
Structural loads on buildings and bridges routinely run into the hundreds of thousands of pounds-force. Expressing a beam's load capacity as "150,000 lbf" is unwieldy, so American structural engineers use the kip (1,000 lbf) to keep numbers compact and readable — "150 kip" instead — the same reasoning that leads metric engineers to prefer kilonewtons over newtons for large loads.
How accurate are these conversions?
Every conversion factor used here is the exact, internationally recognized value (e.g. 1 lbf = exactly 4.4482216152605 N, derived from the internationally standardized pound and standard gravity) — results are limited only by floating-point display precision, not by rounded conversion constants.