CalculatorBoom

Convert Poundal Seconds per Square Foot to Millipoises

Poundal Second per Square Foot (pdl·s/ft²) to Millipoise (mP) dynamic viscosity conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 pdl·s/ft² = 14881.639 mP

1 Poundal Second per Square Foot = 14881.639 Millipoises

1 Millipoise = 6.71969E-05 Poundal Seconds per Square Foot

1 pdl·s/ft² in every supported unit

Conversion chart: Poundal Second per Square Foot to Millipoises

Conversion table

Poundal Second per Square Foot (pdl·s/ft²) Millipoise (mP)
0.01 pdl·s/ft² 148.81639 mP
0.1 pdl·s/ft² 1488.1639 mP
1 pdl·s/ft² 14881.639 mP
2 pdl·s/ft² 29763.279 mP
3 pdl·s/ft² 44644.918 mP
5 pdl·s/ft² 74408.197 mP
10 pdl·s/ft² 148816.39 mP
20 pdl·s/ft² 297632.79 mP
50 pdl·s/ft² 744081.97 mP
100 pdl·s/ft² 1488163.9 mP
1000 pdl·s/ft² 14881639 mP

Poundal Second per Square Foot (pdl·s/ft²)

Definition: A US customary unit of dynamic viscosity built from the poundal, the absolute (mass-based) unit of force in the foot-pound-second system, rather than the gravitational pound-force.

History: Reflects the foot-pound-second 'absolute' system used in some 19th and early 20th century British and American engineering texts as an alternative to gravitational force units.

Current use: Rare today; occasionally found in older engineering references that used the absolute foot-pound-second system rather than the gravitational pound-force system.

Millipoise (mP)

Definition: One thousandth of a poise — a fine-grained CGS unit sized for very low-viscosity fluids such as gases and light vapors.

History: A natural CGS submultiple used wherever the poise or centipoise scale would still read as an inconveniently small fraction, particularly for gas viscosities.

Current use: Occasionally used in physics and chemistry literature reporting the viscosity of gases and very thin liquids.

Supported Units

Unit Symbol In Pa·s
Pascal Second Pa·s 1 Pa·s
Newton Second per Square Meter N·s/m² 1 Pa·s
Millinewton Second per Square Meter mN·s/m² 0.001 Pa·s
Kilogram-force Second per Square Meter kgf·s/m² 9.80665 Pa·s
Poise P 0.1 Pa·s
Centipoise cP 0.001 Pa·s
Millipoise mP 0.0001 Pa·s
Kilopoise kP 100 Pa·s
Dyne Second per Square Centimeter dyn·s/cm² 0.1 Pa·s
Gram per Centimeter per Second g/(cm·s) 0.1 Pa·s
Pound-force Second per Square Inch lbf·s/in² 6894.7573 Pa·s
Pound-force Second per Square Foot lbf·s/ft² 47.880259 Pa·s
Poundal Second per Square Foot pdl·s/ft² 1.4881639 Pa·s
Pound per Foot per Second lb/(ft·s) 1.4881639 Pa·s
Pound per Foot per Hour lb/(ft·h) 0.0004133789 Pa·s

About These Parameters

Value
The dynamic viscosity value you want to convert, expressed in the "From" unit. Accepts decimals.
From Unit
The unit your input value is currently measured in — a viscometer's centipoise reading, or an engineering spec's Pa·s.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly.

How Viscosity - Dynamic Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the pascal second. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Poundal Second per Square Foot → Millipoise: multiply by 14881.639. For example, 1 pdl·s/ft² × 14881.639 = 14881.639 mP.

Dynamic Viscosity vs. Kinematic Viscosity

This page converts DYNAMIC (absolute) viscosity — the pure resistance-to-shear property of a fluid, independent of how heavy that fluid is. The site's separate Viscosity - Kinematic Converter covers a related but different quantity: kinematic viscosity equals dynamic viscosity divided by the fluid's density. Because that division depends on a specific fluid's density at a specific temperature, there is no fixed multiplier that converts a dynamic-viscosity unit directly into a kinematic-viscosity unit the way this page converts between, say, pascal seconds and poise — you need to know the fluid's density first.

Poise and Centipoise

Although the pascal second is the modern SI unit, the CGS-era poise and, especially, the centipoise remain the units most commonly quoted in industry and on viscometer readouts. Water at room temperature (about 20°C) has a dynamic viscosity of almost exactly 1 centipoise, which makes it a convenient mental reference point: a fluid rated at 10 cP is roughly ten times "thicker" than water, one rated at 100,000 cP behaves more like honey or ketchup.

Example

A dynamic viscosity of 1 pdl·s/ft² equals 14881.639 mP. For scale, water at room temperature is about 1 cP (0.001 Pa·s), typical motor oil at operating temperature runs from roughly 50 to 300 cP, and honey can measure anywhere from 2,000 to 10,000 cP depending on temperature and water content.

Frequently Asked Questions

How many Millipoises are in 1 Poundal Second per Square Foot?

1 Poundal Second per Square Foot (pdl·s/ft²) equals exactly 14881.639 Millipoises (mP).

What is dynamic viscosity?

Dynamic (absolute) viscosity is a measure of a fluid's resistance to shear or flow — how much internal friction it has as one layer of fluid slides past another. It's what makes honey pour slower than water, and it's typically measured with a viscometer in units like pascal seconds or centipoise.

How is dynamic viscosity different from kinematic viscosity?

Dynamic viscosity measures pure resistance to shear. Kinematic viscosity is dynamic viscosity divided by the fluid's density, and is used mainly in flow calculations where gravity and inertia matter (e.g. how a fluid drains under its own weight). Converting between the two requires knowing the specific fluid's density, so this page and the site's Viscosity - Kinematic Converter are kept separate.

Why is centipoise still used instead of the SI pascal second?

Centipoise predates the pascal second and happens to land on convenient, easy-to-read numbers for common fluids — water is about 1 cP, light oils are tens of cP, heavy syrups are thousands of cP — so most viscometers, product data sheets, and industry standards continued reporting in cP even after SI officially adopted the pascal second.

How accurate are these conversions?

Every conversion factor used here is the exact, internationally recognized relationship between the underlying force, time, and area units — results are limited only by floating-point display precision, not by rounded conversion constants.

Convert Poundal Second per Square Foot to Other Dynamic Viscosity Units

Poundal Second per Square Foot to Pascal Seconds Poundal Second per Square Foot to Newton Seconds per Square Meter Poundal Second per Square Foot to Millinewton Seconds per Square Meter Poundal Second per Square Foot to Kilogram-force Seconds per Square Meter Poundal Second per Square Foot to Poises Poundal Second per Square Foot to Centipoises Poundal Second per Square Foot to Millipoises Poundal Second per Square Foot to Kilopoises Poundal Second per Square Foot to Dyne Seconds per Square Centimeter Poundal Second per Square Foot to Grams per Centimeter per Second Poundal Second per Square Foot to Pound-force Seconds per Square Inch Poundal Second per Square Foot to Pound-force Seconds per Square Foot Poundal Second per Square Foot to Pounds per Foot per Second Poundal Second per Square Foot to Pounds per Foot per Hour

Possible Dynamic Viscosity Conversions

Pascal Second to Centipoises Poundal Second per Square Foot to Dyne Seconds per Square Centimeter Newton Second per Square Meter to Poundal Seconds per Square Foot Poise to Pascal Seconds Newton Second per Square Meter to Pounds per Foot per Second Newton Second per Square Meter to Millipoises Gram per Centimeter per Second to Kilopoises Pound per Foot per Hour to Kilogram-force Seconds per Square Meter Centipoise to Millinewton Seconds per Square Meter Pascal Second to Millinewton Seconds per Square Meter Pound-force Second per Square Inch to Newton Seconds per Square Meter Kilopoise to Kilogram-force Seconds per Square Meter Millipoise to Pound-force Seconds per Square Inch Pound per Foot per Hour to Pascal Seconds Pound-force Second per Square Inch to Grams per Centimeter per Second Pound per Foot per Second to Kilopoises Gram per Centimeter per Second to Millinewton Seconds per Square Meter Kilopoise to Newton Seconds per Square Meter Pound-force Second per Square Inch to Centipoises Newton Second per Square Meter to Kilopoises Pound-force Second per Square Foot to Grams per Centimeter per Second Gram per Centimeter per Second to Pounds per Foot per Second Poundal Second per Square Foot to Pounds per Foot per Hour Pound per Foot per Hour to Centipoises Pound-force Second per Square Foot to Pounds per Foot per Hour Pound per Foot per Hour to Pounds per Foot per Second Pound per Foot per Second to Kilogram-force Seconds per Square Meter Millinewton Second per Square Meter to Pound-force Seconds per Square Inch Kilopoise to Pound-force Seconds per Square Inch Kilogram-force Second per Square Meter to Dyne Seconds per Square Centimeter Pascal Second to Newton Seconds per Square Meter Newton Second per Square Meter to Pound-force Seconds per Square Inch Dyne Second per Square Centimeter to Poises Dyne Second per Square Centimeter to Kilogram-force Seconds per Square Meter Newton Second per Square Meter to Grams per Centimeter per Second Millinewton Second per Square Meter to Pascal Seconds Pound-force Second per Square Inch to Poundal Seconds per Square Foot Poundal Second per Square Foot to Millipoises Dyne Second per Square Centimeter to Pound-force Seconds per Square Inch Pound per Foot per Second to Pascal Seconds Millipoise to Pounds per Foot per Hour Millinewton Second per Square Meter to Poises Kilopoise to Pounds per Foot per Hour Kilopoise to Millinewton Seconds per Square Meter Gram per Centimeter per Second to Dyne Seconds per Square Centimeter Centipoise to Kilopoises Pound-force Second per Square Foot to Pound-force Seconds per Square Inch Pound per Foot per Second to Pounds per Foot per Hour Pascal Second to Pound-force Seconds per Square Foot Millinewton Second per Square Meter to Newton Seconds per Square Meter Pascal Second to Kilopoises Centipoise to Poises Centipoise to Grams per Centimeter per Second Pascal Second to Dyne Seconds per Square Centimeter Pound per Foot per Second to Pound-force Seconds per Square Foot Pound per Foot per Hour to Pound-force Seconds per Square Inch Pound per Foot per Second to Newton Seconds per Square Meter Pound per Foot per Hour to Pound-force Seconds per Square Foot Pound-force Second per Square Inch to Pound-force Seconds per Square Foot Centipoise to Poundal Seconds per Square Foot Millinewton Second per Square Meter to Kilogram-force Seconds per Square Meter Dyne Second per Square Centimeter to Pounds per Foot per Hour Pound per Foot per Second to Poises Millipoise to Kilopoises Kilopoise to Pound-force Seconds per Square Foot Kilogram-force Second per Square Meter to Poundal Seconds per Square Foot Millipoise to Pascal Seconds Kilogram-force Second per Square Meter to Centipoises Gram per Centimeter per Second to Kilogram-force Seconds per Square Meter Pascal Second to Pound-force Seconds per Square Inch Pound per Foot per Hour to Newton Seconds per Square Meter Pound-force Second per Square Inch to Poises Pound-force Second per Square Foot to Centipoises Pound-force Second per Square Inch to Pounds per Foot per Second Centipoise to Pound-force Seconds per Square Inch Pascal Second to Poundal Seconds per Square Foot Dyne Second per Square Centimeter to Centipoises Kilogram-force Second per Square Meter to Pound-force Seconds per Square Inch Centipoise to Dyne Seconds per Square Centimeter Millinewton Second per Square Meter to Grams per Centimeter per Second Newton Second per Square Meter to Pound-force Seconds per Square Foot Poundal Second per Square Foot to Kilopoises Millipoise to Pound-force Seconds per Square Foot Newton Second per Square Meter to Poises Centipoise to Newton Seconds per Square Meter Pound-force Second per Square Inch to Kilopoises Gram per Centimeter per Second to Pound-force Seconds per Square Inch Millipoise to Centipoises Millinewton Second per Square Meter to Poundal Seconds per Square Foot Pascal Second to Grams per Centimeter per Second Pound-force Second per Square Foot to Newton Seconds per Square Meter Poise to Pound-force Seconds per Square Inch Gram per Centimeter per Second to Poises Poise to Poundal Seconds per Square Foot Pound-force Second per Square Foot to Dyne Seconds per Square Centimeter Pound-force Second per Square Inch to Pounds per Foot per Hour Millipoise to Kilogram-force Seconds per Square Meter Millinewton Second per Square Meter to Kilopoises Millinewton Second per Square Meter to Pounds per Foot per Second Kilopoise to Pounds per Foot per Second Poundal Second per Square Foot to Newton Seconds per Square Meter Pascal Second to Poises Newton Second per Square Meter to Dyne Seconds per Square Centimeter Pound per Foot per Hour to Dyne Seconds per Square Centimeter Pound per Foot per Second to Grams per Centimeter per Second Pascal Second to Pounds per Foot per Second Gram per Centimeter per Second to Poundal Seconds per Square Foot Dyne Second per Square Centimeter to Kilopoises Poundal Second per Square Foot to Kilogram-force Seconds per Square Meter Pound per Foot per Second to Pound-force Seconds per Square Inch Pound-force Second per Square Foot to Millinewton Seconds per Square Meter Gram per Centimeter per Second to Newton Seconds per Square Meter Pound per Foot per Second to Dyne Seconds per Square Centimeter Kilogram-force Second per Square Meter to Millinewton Seconds per Square Meter Kilogram-force Second per Square Meter to Pascal Seconds Millipoise to Dyne Seconds per Square Centimeter Gram per Centimeter per Second to Millipoises Kilopoise to Poises Kilogram-force Second per Square Meter to Pounds per Foot per Hour Kilogram-force Second per Square Meter to Kilopoises Pound per Foot per Hour to Millinewton Seconds per Square Meter Newton Second per Square Meter to Kilogram-force Seconds per Square Meter Pound per Foot per Hour to Millipoises Pound-force Second per Square Inch to Millinewton Seconds per Square Meter Millipoise to Poises Gram per Centimeter per Second to Pound-force Seconds per Square Foot Kilopoise to Dyne Seconds per Square Centimeter Dyne Second per Square Centimeter to Pounds per Foot per Second Kilogram-force Second per Square Meter to Pounds per Foot per Second Kilogram-force Second per Square Meter to Grams per Centimeter per Second Newton Second per Square Meter to Pounds per Foot per Hour Newton Second per Square Meter to Millinewton Seconds per Square Meter Poundal Second per Square Foot to Poises Pound per Foot per Hour to Grams per Centimeter per Second Dyne Second per Square Centimeter to Poundal Seconds per Square Foot Poundal Second per Square Foot to Millinewton Seconds per Square Meter Millipoise to Grams per Centimeter per Second Pound-force Second per Square Foot to Poundal Seconds per Square Foot Poundal Second per Square Foot to Pound-force Seconds per Square Foot Pound-force Second per Square Foot to Pascal Seconds Gram per Centimeter per Second to Pounds per Foot per Hour Pound-force Second per Square Foot to Poises Poundal Second per Square Foot to Pascal Seconds Dyne Second per Square Centimeter to Millinewton Seconds per Square Meter Pascal Second to Millipoises Poise to Dyne Seconds per Square Centimeter Dyne Second per Square Centimeter to Millipoises Kilopoise to Millipoises Poise to Pound-force Seconds per Square Foot Pound per Foot per Second to Millinewton Seconds per Square Meter Millipoise to Poundal Seconds per Square Foot Pound per Foot per Hour to Poundal Seconds per Square Foot Dyne Second per Square Centimeter to Newton Seconds per Square Meter Millinewton Second per Square Meter to Dyne Seconds per Square Centimeter Kilogram-force Second per Square Meter to Newton Seconds per Square Meter Kilopoise to Poundal Seconds per Square Foot Poise to Kilopoises Pascal Second to Pounds per Foot per Hour Centipoise to Pascal Seconds Dyne Second per Square Centimeter to Pascal Seconds Pound per Foot per Hour to Kilopoises Pound-force Second per Square Inch to Kilogram-force Seconds per Square Meter Dyne Second per Square Centimeter to Grams per Centimeter per Second Centipoise to Kilogram-force Seconds per Square Meter Pound per Foot per Second to Centipoises Gram per Centimeter per Second to Centipoises Millinewton Second per Square Meter to Centipoises Kilogram-force Second per Square Meter to Poises Kilopoise to Centipoises Pound-force Second per Square Foot to Kilopoises Poise to Grams per Centimeter per Second Poundal Second per Square Foot to Pounds per Foot per Second Gram per Centimeter per Second to Pascal Seconds Millipoise to Pounds per Foot per Second Millinewton Second per Square Meter to Pound-force Seconds per Square Foot Kilopoise to Grams per Centimeter per Second Pound-force Second per Square Foot to Kilogram-force Seconds per Square Meter Pound per Foot per Second to Millipoises Poise to Millinewton Seconds per Square Meter Millinewton Second per Square Meter to Millipoises Pound-force Second per Square Inch to Pascal Seconds Poise to Millipoises Kilogram-force Second per Square Meter to Pound-force Seconds per Square Foot Millipoise to Newton Seconds per Square Meter Millinewton Second per Square Meter to Pounds per Foot per Hour Centipoise to Pounds per Foot per Hour Pound per Foot per Second to Poundal Seconds per Square Foot Pound-force Second per Square Inch to Millipoises Kilopoise to Pascal Seconds Pound per Foot per Hour to Poises Pound-force Second per Square Foot to Millipoises Pascal Second to Kilogram-force Seconds per Square Meter Centipoise to Pounds per Foot per Second Centipoise to Pound-force Seconds per Square Foot Pound-force Second per Square Foot to Pounds per Foot per Second Poundal Second per Square Foot to Centipoises Pound-force Second per Square Inch to Dyne Seconds per Square Centimeter Centipoise to Millipoises Poise to Pounds per Foot per Hour Poise to Kilogram-force Seconds per Square Meter Poise to Centipoises Poundal Second per Square Foot to Pound-force Seconds per Square Inch Poise to Newton Seconds per Square Meter Millipoise to Millinewton Seconds per Square Meter Newton Second per Square Meter to Centipoises Dyne Second per Square Centimeter to Pound-force Seconds per Square Foot Kilogram-force Second per Square Meter to Millipoises Newton Second per Square Meter to Pascal Seconds Poundal Second per Square Foot to Grams per Centimeter per Second Poise to Pounds per Foot per Second

See also