CalculatorBoom

Convert Grams per Centimeter per Second to Pounds per Foot per Second

Gram per Centimeter per Second (g/(cm·s)) to Pound per Foot per Second (lb/(ft·s)) dynamic viscosity conversion — enter any value below to get an instant result, or use the table for common values.

Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.

The numeric value you want to convert. Decimals are accepted.

Result

1 g/(cm·s) = 0.067196898 lb/(ft·s)

1 Gram per Centimeter per Second = 0.067196898 Pounds per Foot per Second

1 Pound per Foot per Second = 14.881639 Grams per Centimeter per Second

1 g/(cm·s) in every supported unit

Conversion chart: Gram per Centimeter per Second to Pounds per Foot per Second

Conversion table

Gram per Centimeter per Second (g/(cm·s)) Pound per Foot per Second (lb/(ft·s))
0.01 g/(cm·s) 0.00067196898 lb/(ft·s)
0.1 g/(cm·s) 0.0067196898 lb/(ft·s)
1 g/(cm·s) 0.067196898 lb/(ft·s)
2 g/(cm·s) 0.1343938 lb/(ft·s)
3 g/(cm·s) 0.20159069 lb/(ft·s)
5 g/(cm·s) 0.33598449 lb/(ft·s)
10 g/(cm·s) 0.67196898 lb/(ft·s)
20 g/(cm·s) 1.343938 lb/(ft·s)
50 g/(cm·s) 3.3598449 lb/(ft·s)
100 g/(cm·s) 6.7196898 lb/(ft·s)
1000 g/(cm·s) 67.196898 lb/(ft·s)

Gram per Centimeter per Second (g/(cm·s))

Definition: Another CGS-equivalent way of expressing the poise, built directly from mass, length, and time rather than from force.

History: Represents the poise's original mass-length-time definition before the dyne-second-per-square-centimeter shorthand became common, reflecting viscosity's fundamental dimensional formula.

Current use: Used in physics and chemistry contexts that derive viscosity from first-principles mass/length/time relationships rather than from a named force unit.

Pound per Foot per Second (lb/(ft·s))

Definition: A US customary mass-length-time unit of dynamic viscosity, the imperial counterpart to the CGS gram per centimeter per second.

History: Built directly from the pound mass, foot, and second, following the fundamental mass/length/time dimensional definition of viscosity in the US customary system.

Current use: Used in US engineering calculations that prefer to work in pound-mass rather than pound-force, keeping viscosity consistent with mass-based US customary formulas.

Supported Units

Unit Symbol In Pa·s
Pascal Second Pa·s 1 Pa·s
Newton Second per Square Meter N·s/m² 1 Pa·s
Millinewton Second per Square Meter mN·s/m² 0.001 Pa·s
Kilogram-force Second per Square Meter kgf·s/m² 9.80665 Pa·s
Poise P 0.1 Pa·s
Centipoise cP 0.001 Pa·s
Millipoise mP 0.0001 Pa·s
Kilopoise kP 100 Pa·s
Dyne Second per Square Centimeter dyn·s/cm² 0.1 Pa·s
Gram per Centimeter per Second g/(cm·s) 0.1 Pa·s
Pound-force Second per Square Inch lbf·s/in² 6894.7573 Pa·s
Pound-force Second per Square Foot lbf·s/ft² 47.880259 Pa·s
Poundal Second per Square Foot pdl·s/ft² 1.4881639 Pa·s
Pound per Foot per Second lb/(ft·s) 1.4881639 Pa·s
Pound per Foot per Hour lb/(ft·h) 0.0004133789 Pa·s

About These Parameters

Value
The dynamic viscosity value you want to convert, expressed in the "From" unit. Accepts decimals.
From Unit
The unit your input value is currently measured in — a viscometer's centipoise reading, or an engineering spec's Pa·s.
To Unit
The unit you want the result converted into. Use the swap button to flip From and To instantly.

How Viscosity - Dynamic Conversion Works

The Formula

Every unit here is defined by a fixed multiplier relative to the pascal second. To convert a value from one unit to another:

result = value × (factor of "From" unit ÷ factor of "To" unit)

For Gram per Centimeter per Second → Pound per Foot per Second: multiply by 0.067196898. For example, 1 g/(cm·s) × 0.067196898 = 0.067196898 lb/(ft·s).

Dynamic Viscosity vs. Kinematic Viscosity

This page converts DYNAMIC (absolute) viscosity — the pure resistance-to-shear property of a fluid, independent of how heavy that fluid is. The site's separate Viscosity - Kinematic Converter covers a related but different quantity: kinematic viscosity equals dynamic viscosity divided by the fluid's density. Because that division depends on a specific fluid's density at a specific temperature, there is no fixed multiplier that converts a dynamic-viscosity unit directly into a kinematic-viscosity unit the way this page converts between, say, pascal seconds and poise — you need to know the fluid's density first.

Poise and Centipoise

Although the pascal second is the modern SI unit, the CGS-era poise and, especially, the centipoise remain the units most commonly quoted in industry and on viscometer readouts. Water at room temperature (about 20°C) has a dynamic viscosity of almost exactly 1 centipoise, which makes it a convenient mental reference point: a fluid rated at 10 cP is roughly ten times "thicker" than water, one rated at 100,000 cP behaves more like honey or ketchup.

Example

A dynamic viscosity of 1 g/(cm·s) equals 0.067196898 lb/(ft·s). For scale, water at room temperature is about 1 cP (0.001 Pa·s), typical motor oil at operating temperature runs from roughly 50 to 300 cP, and honey can measure anywhere from 2,000 to 10,000 cP depending on temperature and water content.

Frequently Asked Questions

How many Pounds per Foot per Second are in 1 Gram per Centimeter per Second?

1 Gram per Centimeter per Second (g/(cm·s)) equals exactly 0.067196898 Pounds per Foot per Second (lb/(ft·s)).

What is dynamic viscosity?

Dynamic (absolute) viscosity is a measure of a fluid's resistance to shear or flow — how much internal friction it has as one layer of fluid slides past another. It's what makes honey pour slower than water, and it's typically measured with a viscometer in units like pascal seconds or centipoise.

How is dynamic viscosity different from kinematic viscosity?

Dynamic viscosity measures pure resistance to shear. Kinematic viscosity is dynamic viscosity divided by the fluid's density, and is used mainly in flow calculations where gravity and inertia matter (e.g. how a fluid drains under its own weight). Converting between the two requires knowing the specific fluid's density, so this page and the site's Viscosity - Kinematic Converter are kept separate.

Why is centipoise still used instead of the SI pascal second?

Centipoise predates the pascal second and happens to land on convenient, easy-to-read numbers for common fluids — water is about 1 cP, light oils are tens of cP, heavy syrups are thousands of cP — so most viscometers, product data sheets, and industry standards continued reporting in cP even after SI officially adopted the pascal second.

How accurate are these conversions?

Every conversion factor used here is the exact, internationally recognized relationship between the underlying force, time, and area units — results are limited only by floating-point display precision, not by rounded conversion constants.

Convert Gram per Centimeter per Second to Other Dynamic Viscosity Units

Gram per Centimeter per Second to Pascal Seconds Gram per Centimeter per Second to Newton Seconds per Square Meter Gram per Centimeter per Second to Millinewton Seconds per Square Meter Gram per Centimeter per Second to Kilogram-force Seconds per Square Meter Gram per Centimeter per Second to Poises Gram per Centimeter per Second to Centipoises Gram per Centimeter per Second to Millipoises Gram per Centimeter per Second to Kilopoises Gram per Centimeter per Second to Dyne Seconds per Square Centimeter Gram per Centimeter per Second to Pound-force Seconds per Square Inch Gram per Centimeter per Second to Pound-force Seconds per Square Foot Gram per Centimeter per Second to Poundal Seconds per Square Foot Gram per Centimeter per Second to Pounds per Foot per Second Gram per Centimeter per Second to Pounds per Foot per Hour

Possible Dynamic Viscosity Conversions

Kilopoise to Grams per Centimeter per Second Gram per Centimeter per Second to Pounds per Foot per Hour Millipoise to Pascal Seconds Poise to Newton Seconds per Square Meter Pound per Foot per Second to Grams per Centimeter per Second Gram per Centimeter per Second to Poundal Seconds per Square Foot Gram per Centimeter per Second to Pound-force Seconds per Square Inch Pound per Foot per Second to Millinewton Seconds per Square Meter Kilogram-force Second per Square Meter to Pounds per Foot per Second Millipoise to Poises Pound-force Second per Square Foot to Pounds per Foot per Second Pound-force Second per Square Inch to Kilopoises Pound per Foot per Hour to Poundal Seconds per Square Foot Kilogram-force Second per Square Meter to Grams per Centimeter per Second Pound per Foot per Hour to Millipoises Millipoise to Pound-force Seconds per Square Inch Pascal Second to Pound-force Seconds per Square Inch Dyne Second per Square Centimeter to Millipoises Centipoise to Dyne Seconds per Square Centimeter Millinewton Second per Square Meter to Newton Seconds per Square Meter Gram per Centimeter per Second to Millinewton Seconds per Square Meter Dyne Second per Square Centimeter to Grams per Centimeter per Second Newton Second per Square Meter to Pounds per Foot per Second Centipoise to Pound-force Seconds per Square Inch Pound per Foot per Hour to Pascal Seconds Centipoise to Pounds per Foot per Second Pound-force Second per Square Inch to Millipoises Pound per Foot per Hour to Pound-force Seconds per Square Inch Millipoise to Kilopoises Gram per Centimeter per Second to Pascal Seconds Pound-force Second per Square Inch to Centipoises Kilopoise to Kilogram-force Seconds per Square Meter Kilogram-force Second per Square Meter to Pounds per Foot per Hour Pound per Foot per Second to Pound-force Seconds per Square Foot Pound-force Second per Square Foot to Dyne Seconds per Square Centimeter Pound per Foot per Second to Dyne Seconds per Square Centimeter Newton Second per Square Meter to Poises Gram per Centimeter per Second to Poises Poundal Second per Square Foot to Pounds per Foot per Hour Gram per Centimeter per Second to Dyne Seconds per Square Centimeter Millinewton Second per Square Meter to Poundal Seconds per Square Foot Kilopoise to Centipoises Millipoise to Pounds per Foot per Second Pound-force Second per Square Inch to Poises Millinewton Second per Square Meter to Pascal Seconds Millinewton Second per Square Meter to Poises Pascal Second to Kilogram-force Seconds per Square Meter Pound per Foot per Hour to Newton Seconds per Square Meter Millipoise to Pounds per Foot per Hour Kilopoise to Poundal Seconds per Square Foot Pound per Foot per Second to Newton Seconds per Square Meter Kilogram-force Second per Square Meter to Pound-force Seconds per Square Foot Pound-force Second per Square Foot to Newton Seconds per Square Meter Kilogram-force Second per Square Meter to Newton Seconds per Square Meter Pascal Second to Poundal Seconds per Square Foot Kilopoise to Pascal Seconds Centipoise to Kilogram-force Seconds per Square Meter Millipoise to Poundal Seconds per Square Foot Pound-force Second per Square Foot to Millipoises Poise to Kilopoises Pound-force Second per Square Foot to Millinewton Seconds per Square Meter Millinewton Second per Square Meter to Pound-force Seconds per Square Foot Pound-force Second per Square Foot to Pascal Seconds Dyne Second per Square Centimeter to Pound-force Seconds per Square Foot Pound-force Second per Square Inch to Dyne Seconds per Square Centimeter Dyne Second per Square Centimeter to Poises Kilogram-force Second per Square Meter to Millinewton Seconds per Square Meter Kilogram-force Second per Square Meter to Centipoises Poundal Second per Square Foot to Pounds per Foot per Second Dyne Second per Square Centimeter to Kilopoises Poise to Millinewton Seconds per Square Meter Pascal Second to Pounds per Foot per Second Poundal Second per Square Foot to Poises Newton Second per Square Meter to Grams per Centimeter per Second Poundal Second per Square Foot to Pound-force Seconds per Square Inch Poundal Second per Square Foot to Grams per Centimeter per Second Kilogram-force Second per Square Meter to Millipoises Kilogram-force Second per Square Meter to Pascal Seconds Pound-force Second per Square Inch to Poundal Seconds per Square Foot Poise to Kilogram-force Seconds per Square Meter Pascal Second to Newton Seconds per Square Meter Dyne Second per Square Centimeter to Newton Seconds per Square Meter Poise to Grams per Centimeter per Second Kilopoise to Millinewton Seconds per Square Meter Dyne Second per Square Centimeter to Millinewton Seconds per Square Meter Dyne Second per Square Centimeter to Poundal Seconds per Square Foot Dyne Second per Square Centimeter to Pounds per Foot per Second Pascal Second to Millinewton Seconds per Square Meter Newton Second per Square Meter to Poundal Seconds per Square Foot Kilopoise to Poises Pound-force Second per Square Foot to Kilogram-force Seconds per Square Meter Poise to Pounds per Foot per Hour Pound-force Second per Square Foot to Pounds per Foot per Hour Pound per Foot per Hour to Centipoises Newton Second per Square Meter to Pound-force Seconds per Square Inch Poise to Pound-force Seconds per Square Inch Millipoise to Pound-force Seconds per Square Foot Gram per Centimeter per Second to Kilogram-force Seconds per Square Meter Poise to Pounds per Foot per Second Pascal Second to Pound-force Seconds per Square Foot Gram per Centimeter per Second to Kilopoises Kilogram-force Second per Square Meter to Dyne Seconds per Square Centimeter Dyne Second per Square Centimeter to Pounds per Foot per Hour Gram per Centimeter per Second to Newton Seconds per Square Meter Poundal Second per Square Foot to Kilopoises Millinewton Second per Square Meter to Pounds per Foot per Second Millipoise to Millinewton Seconds per Square Meter Pound-force Second per Square Foot to Poises Millipoise to Centipoises Gram per Centimeter per Second to Millipoises Pascal Second to Pounds per Foot per Hour Pound per Foot per Hour to Grams per Centimeter per Second Centipoise to Grams per Centimeter per Second Millinewton Second per Square Meter to Millipoises Pascal Second to Poises Poundal Second per Square Foot to Millipoises Kilopoise to Newton Seconds per Square Meter Poise to Pound-force Seconds per Square Foot Poise to Dyne Seconds per Square Centimeter Poise to Millipoises Pound per Foot per Hour to Poises Newton Second per Square Meter to Pounds per Foot per Hour Pound per Foot per Second to Pound-force Seconds per Square Inch Poise to Pascal Seconds Pound per Foot per Hour to Pounds per Foot per Second Centipoise to Pascal Seconds Millipoise to Grams per Centimeter per Second Pound per Foot per Hour to Pound-force Seconds per Square Foot Pound per Foot per Second to Kilogram-force Seconds per Square Meter Newton Second per Square Meter to Kilopoises Pound-force Second per Square Foot to Pound-force Seconds per Square Inch Pound per Foot per Hour to Dyne Seconds per Square Centimeter Pascal Second to Millipoises Newton Second per Square Meter to Centipoises Pound per Foot per Second to Poundal Seconds per Square Foot Poise to Centipoises Millinewton Second per Square Meter to Pounds per Foot per Hour Poise to Poundal Seconds per Square Foot Pound-force Second per Square Foot to Kilopoises Pascal Second to Kilopoises Centipoise to Pounds per Foot per Hour Newton Second per Square Meter to Millipoises Poundal Second per Square Foot to Dyne Seconds per Square Centimeter Millipoise to Kilogram-force Seconds per Square Meter Poundal Second per Square Foot to Pascal Seconds Centipoise to Millipoises Dyne Second per Square Centimeter to Pascal Seconds Gram per Centimeter per Second to Centipoises Newton Second per Square Meter to Dyne Seconds per Square Centimeter Centipoise to Poundal Seconds per Square Foot Millinewton Second per Square Meter to Grams per Centimeter per Second Kilopoise to Dyne Seconds per Square Centimeter Pound per Foot per Second to Poises Dyne Second per Square Centimeter to Pound-force Seconds per Square Inch Kilogram-force Second per Square Meter to Pound-force Seconds per Square Inch Centipoise to Newton Seconds per Square Meter Pound-force Second per Square Inch to Pounds per Foot per Hour Pound-force Second per Square Inch to Newton Seconds per Square Meter Pound per Foot per Second to Millipoises Pascal Second to Dyne Seconds per Square Centimeter Newton Second per Square Meter to Pound-force Seconds per Square Foot Pound-force Second per Square Inch to Pounds per Foot per Second Centipoise to Pound-force Seconds per Square Foot Poundal Second per Square Foot to Millinewton Seconds per Square Meter Pound-force Second per Square Foot to Grams per Centimeter per Second Gram per Centimeter per Second to Pound-force Seconds per Square Foot Dyne Second per Square Centimeter to Centipoises Kilogram-force Second per Square Meter to Poises Newton Second per Square Meter to Millinewton Seconds per Square Meter Millinewton Second per Square Meter to Pound-force Seconds per Square Inch Pound-force Second per Square Inch to Grams per Centimeter per Second Kilopoise to Pound-force Seconds per Square Inch Newton Second per Square Meter to Pascal Seconds Pound-force Second per Square Inch to Kilogram-force Seconds per Square Meter Pascal Second to Grams per Centimeter per Second Poundal Second per Square Foot to Pound-force Seconds per Square Foot Pound-force Second per Square Inch to Pascal Seconds Pound-force Second per Square Foot to Centipoises Pound-force Second per Square Inch to Pound-force Seconds per Square Foot Centipoise to Kilopoises Dyne Second per Square Centimeter to Kilogram-force Seconds per Square Meter Pascal Second to Centipoises Pound per Foot per Hour to Kilopoises Gram per Centimeter per Second to Pounds per Foot per Second Kilogram-force Second per Square Meter to Poundal Seconds per Square Foot Kilopoise to Millipoises Kilopoise to Pound-force Seconds per Square Foot Pound per Foot per Second to Kilopoises Millipoise to Dyne Seconds per Square Centimeter Millinewton Second per Square Meter to Kilogram-force Seconds per Square Meter Poundal Second per Square Foot to Kilogram-force Seconds per Square Meter Newton Second per Square Meter to Kilogram-force Seconds per Square Meter Centipoise to Millinewton Seconds per Square Meter Millinewton Second per Square Meter to Dyne Seconds per Square Centimeter Pound per Foot per Second to Centipoises Pound per Foot per Hour to Kilogram-force Seconds per Square Meter Poundal Second per Square Foot to Centipoises Pound per Foot per Hour to Millinewton Seconds per Square Meter Centipoise to Poises Kilogram-force Second per Square Meter to Kilopoises Millipoise to Newton Seconds per Square Meter Pound-force Second per Square Foot to Poundal Seconds per Square Foot Millinewton Second per Square Meter to Kilopoises Pound-force Second per Square Inch to Millinewton Seconds per Square Meter Kilopoise to Pounds per Foot per Second Pound per Foot per Second to Pascal Seconds Pound per Foot per Second to Pounds per Foot per Hour Poundal Second per Square Foot to Newton Seconds per Square Meter Millinewton Second per Square Meter to Centipoises Kilopoise to Pounds per Foot per Hour

See also