Convert Torr to Megapascals
Torr (Torr) to Megapascal (MPa) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 Torr = 0.00013332237 MPa
1 Torr = 0.00013332237 Megapascals
1 Megapascal = 7500.6168 Torr
1 Torr in every supported unit
Conversion chart: Torr to Megapascals
Conversion table
| Torr (Torr) | Megapascal (MPa) |
|---|---|
| 0.01 Torr | 1.33322E-06 MPa |
| 0.1 Torr | 1.33322E-05 MPa |
| 1 Torr | 0.00013332237 MPa |
| 2 Torr | 0.00026664474 MPa |
| 3 Torr | 0.00039996711 MPa |
| 5 Torr | 0.00066661184 MPa |
| 10 Torr | 0.0013332237 MPa |
| 20 Torr | 0.0026664474 MPa |
| 50 Torr | 0.0066661184 MPa |
| 100 Torr | 0.013332237 MPa |
| 1000 Torr | 0.13332237 MPa |
Torr (Torr)
Definition: Defined so that 760 Torr equals exactly one standard atmosphere, making one Torr approximately 1/760th of atmospheric pressure.
History: Named in the 20th century in honor of Evangelista Torricelli, the Italian physicist who invented the mercury barometer in 1643 and first demonstrated that air has measurable weight.
Current use: The standard unit in vacuum science and industrial processes such as semiconductor manufacturing, where pressures are far below atmospheric and require fine-grained measurement.
Megapascal (MPa)
Definition: Equal to one million pascals, used for pressures and mechanical stresses far larger than everyday atmospheric pressure.
History: Adopted as a standard SI multiple alongside the kilopascal, becoming the preferred unit once engineers needed to express material strength and high hydraulic pressures without unwieldy pascal figures.
Current use: The standard unit for tensile strength, concrete and steel stress ratings, and high-pressure hydraulic systems in mechanical and civil engineering worldwide.
Supported Units
| Unit | Symbol | In Pascals |
|---|---|---|
| Pascal | Pa | 1 Pa |
| Kilopascal | kPa | 1000 Pa |
| Megapascal | MPa | 1000000 Pa |
| Hectopascal | hPa | 100 Pa |
| Bar | bar | 100000 Pa |
| Millibar | mbar | 100 Pa |
| Pound per Square Inch | psi | 6894.7573 Pa |
| Standard Atmosphere | atm | 101325 Pa |
| Torr | Torr | 133.32237 Pa |
| Inch of Mercury | inHg | 3386.38 Pa |
About These Parameters
- Value
- The pressure reading you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The pressure scale your input value is currently measured in — for example, PSI on a US tire gauge or hectopascals on a weather report.
- To Unit
- The pressure scale you want the result converted into. Use the swap button to flip From and To instantly.
How Pressure Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the pascal. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Torr → Megapascal: multiply by 0.00013332237. For example, 1 Torr × 0.00013332237 = 0.00013332237 MPa.
SI vs. Customary Units
The metric units on this page — pascal, kilopascal, megapascal, hectopascal, bar, and millibar — all scale by powers of ten, so converting between them is just moving a decimal point. PSI is a US customary unit built from pounds-force and square inches, unrelated to the metric scale, while torr and inches of mercury are older manometer-based units defined by the height of a mercury column a pressure could support — each needs its own precise multiplier rather than a round decimal shift.
Why Atmospheric Pressure Matters
Standard atmospheric pressure — 101,325 Pa, or 1 atm — is the reference point most pressure units are built around, because it is the pressure every person and machine on Earth's surface experiences by default. Meteorologists track small deviations from this baseline, measured in hectopascals or millibars, to forecast weather: a falling barometer reading signals an approaching low-pressure system and possible storms, while a rising one signals clear, stable conditions.
Example
1 Torr equals 0.00013332237 MPa. For scale, that's about 0× standard atmospheric pressure (1 atm, or 760 Torr) — roughly the pressure difference a typical car tire holds above the surrounding air (about 32 psi, or 2.2 bar).
Frequently Asked Questions
How many Megapascals are in 1 Torr?
1 Torr (Torr) equals exactly 0.00013332237 Megapascals (MPa).
Why do US tire gauges use PSI?
The United States never mandated metrication, so pounds and inches stayed the default units for everyday measurement, including the pound-force-per-square-inch pressure scale used on tire gauges, plumbing fixtures, and compressed air tools. Most of the rest of the world reads the same measurement in bar or kilopascals.
What's the difference between a bar and an atmosphere?
A bar is a round metric unit equal to exactly 100,000 pascals, chosen for convenient arithmetic; a standard atmosphere is fixed at exactly 101,325 pascals, the measured average air pressure at sea level. The two are close — 1 atm is about 1.01325 bar — but they are defined differently and are not interchangeable in precise scientific work.
How accurate are these conversions?
Every conversion factor used here is the exact, internationally standardized value (e.g. 1 atm = exactly 101,325 Pa, and 1 psi = exactly 6,894.7572931783 Pa) — results are limited only by floating-point display precision, not by rounded conversion constants.