Convert Minutes to Seconds
Minute (min) to Second (s) duration conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 min = 60 s
1 Minute = 60 Seconds
1 Second = 0.016666667 Minutes
1 min in every supported unit
Conversion chart: Minute to Seconds
Conversion table
| Minute (min) | Second (s) |
|---|---|
| 0.01 min | 0.6 s |
| 0.1 min | 6 s |
| 1 min | 60 s |
| 2 min | 120 s |
| 3 min | 180 s |
| 5 min | 300 s |
| 10 min | 600 s |
| 20 min | 1200 s |
| 50 min | 3000 s |
| 100 min | 6000 s |
| 1000 min | 60000 s |
Minute (min)
Definition: Equal to 60 seconds, one of the two subdivisions of the hour inherited from ancient sexagesimal (base-60) timekeeping.
History: The division of the hour into 60 minutes traces back to Babylonian mathematics, which used a base-60 (sexagesimal) number system because 60 divides evenly by many small numbers (2, 3, 4, 5, 6, 10, 12, 15, 20, 30). Hellenistic astronomers adopted this scheme for dividing time and angles, and it has persisted unchanged for over two millennia.
Current use: Used everywhere for scheduling, cooking, sports timing, and everyday duration — the default unit for events lasting from a few minutes up to a couple of hours.
Second (s)
Definition: The SI base unit of time, defined since 1967 as the duration of exactly 9,192,631,770 periods of the radiation corresponding to a specific transition of the cesium-133 atom.
History: Originally defined astronomically as 1/86,400 of a mean solar day, the second was redefined in 1967 by the atomic transition standard because Earth's rotation is not perfectly constant — atomic clocks proved far more stable and reproducible than any astronomical measurement.
Current use: The fundamental unit of time in science, engineering, and everyday life worldwide — GPS satellites, financial trading systems, and power grids all synchronize to atomic-clock-derived seconds.
Supported Units
| Unit | Symbol | In Seconds |
|---|---|---|
| Millisecond | ms | 0.001 s |
| Second | s | 1 s |
| Minute | min | 60 s |
| Hour | hr | 3600 s |
| Day | day | 86400 s |
| Week | wk | 604800 s |
| Month | mo | 2629800 s |
| Year | yr | 31557600 s |
About These Parameters
- Value
- The numeric duration you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The unit your input duration is currently measured in.
- To Unit
- The unit you want the duration converted into. Use the swap button to flip From and To instantly.
How Time Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the second. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Minute → Second: multiply by 60. For example, 1 min × 60 = 60 s.
Base-60 and Base-24: Where the Numbers Come From
Unlike metric length or weight, time units are not powers of ten. The 60-second minute and 60-minute hour come from ancient Babylonian mathematics, which used a sexagesimal (base-60) number system because 60 divides evenly by 2, 3, 4, 5, 6, 10, 12, 15, 20, and 30 — convenient for splitting time into halves, thirds, and quarters without fractions. The 24-hour day traces to ancient Egypt, which divided daylight into 12 parts with sundials and the night into 12 parts by star observation, giving 24 hours in total once Hellenistic astronomers fixed the hour to a constant length.
Months and Years Are Averages, Not Exact Values
Every unit on this page except month and year has one fixed, exact length. A real calendar month varies from 28 to 31 days, and a real calendar year is 365 or 366 days depending on leap years — so there is no single "correct" number of seconds in a month or year. This converter uses standard astronomical averages instead: a month is treated as 1/12 of a Julian year (30.4368 days) and a year as a Julian year of exactly 365.25 days. Conversions involving month or year are therefore close approximations, useful for estimates like "about how many days is 18 months?" but not exact for any specific calendar month or year.
Why Leap Years Exist
A true solar year — the time Earth takes to orbit the Sun — is about 365.2422 days, not exactly 365. If calendars used a flat 365-day year, the calendar would drift by roughly a quarter of a day annually and by about 24 days per century, eventually putting summer months in winter. Adding a leap day roughly every four years (refined further by the Gregorian calendar's century-year rule) keeps the civil calendar aligned with the actual solar year — a correction made necessary precisely because "year" is an average, not a fixed duration.
Example
1 min equals 60 s. For scale, that's about 0× one full day (1 day, or 1440 min).
Frequently Asked Questions
How many Seconds are in 1 Minute?
1 Minute (min) equals exactly 60 Seconds (s).
Why isn't a month exactly 30 days on this converter?
Real calendar months range from 28 days (February) to 31 days (January, March, and others), so there is no single exact conversion factor. This tool uses the average month length (1/12 of a Julian year, about 30.4368 days) to give a consistent, useful estimate rather than picking one specific month arbitrarily.
Is this the same as a date or calendar calculator?
No. A date calculator answers questions like "how many days between March 1 and June 15?" using calendar dates. This time converter simply rescales a plain duration — like 5 hours or 3 weeks — from one unit into another, with no calendar dates involved.
Why do minutes and hours use 60, not 100 like the metric system?
Time predates the metric system by millennia. The 60-based (sexagesimal) division of hours into minutes and seconds comes from ancient Babylonian mathematics and was never replaced, unlike length and weight, which France standardized into decimal (base-10) metric units in the 1790s.