Convert Kilojoules per Kilogram per Kelvin to Kilocalories (IT) per Kilogram per °C
Kilojoule per Kilogram per Kelvin (kJ/(kg·K)) to Kilocalorie (IT) per Kilogram per °C (kcal/(kg·°C)) specific heat capacity conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 kJ/(kg·K) = 0.2388459 kcal/(kg·°C)
1 Kilojoule per Kilogram per Kelvin = 0.2388459 Kilocalories (IT) per Kilogram per °C
1 Kilocalorie (IT) per Kilogram per °C = 4.1868 Kilojoules per Kilogram per Kelvin
1 kJ/(kg·K) in every supported unit
Conversion chart: Kilojoule per Kilogram per Kelvin to Kilocalories (IT) per Kilogram per °C
Conversion table
| Kilojoule per Kilogram per Kelvin (kJ/(kg·K)) | Kilocalorie (IT) per Kilogram per °C (kcal/(kg·°C)) |
|---|---|
| 0.01 kJ/(kg·K) | 0.002388459 kcal/(kg·°C) |
| 0.1 kJ/(kg·K) | 0.02388459 kcal/(kg·°C) |
| 1 kJ/(kg·K) | 0.2388459 kcal/(kg·°C) |
| 2 kJ/(kg·K) | 0.47769179 kcal/(kg·°C) |
| 3 kJ/(kg·K) | 0.71653769 kcal/(kg·°C) |
| 5 kJ/(kg·K) | 1.1942295 kcal/(kg·°C) |
| 10 kJ/(kg·K) | 2.388459 kcal/(kg·°C) |
| 20 kJ/(kg·K) | 4.7769179 kcal/(kg·°C) |
| 50 kJ/(kg·K) | 11.942295 kcal/(kg·°C) |
| 100 kJ/(kg·K) | 23.88459 kcal/(kg·°C) |
| 1000 kJ/(kg·K) | 238.8459 kcal/(kg·°C) |
Kilojoule per Kilogram per Kelvin (kJ/(kg·K))
Definition: A more practically sized specific heat capacity unit, since raw joule figures for real materials (water is about 4,186 J/(kg·K)) run inconveniently large.
History: A natural SI multiple of joule per kilogram per kelvin, adopted once engineering tables needed heat-capacity figures in a friendlier one-to-four-digit range.
Current use: Common in mechanical and chemical engineering reference tables and process design calculations for the specific heat of fuels, coolants, and industrial fluids.
Kilocalorie (IT) per Kilogram per °C (kcal/(kg·°C))
Definition: Numerically identical to calories per gram per °C (both scale mass and energy by the same factor of 1,000), and the standard metric heat-capacity unit for larger, kilogram-scale material quantities.
History: A natural kilogram-scale variant of the calorie-based heat-capacity unit, used once engineers needed calorie-based figures for full-scale industrial material quantities rather than laboratory samples.
Current use: Common in metric-system engineering and food-processing heat-capacity tables, particularly in Europe and Asia before SI joule-based units became universal.
Supported Units
| Unit | Symbol | In J/(kg·K) |
|---|---|---|
| Joule per Kilogram per Kelvin | J/(kg·K) | 1 J/(kg·K) |
| Kilojoule per Kilogram per Kelvin | kJ/(kg·K) | 1000 J/(kg·K) |
| Joule per Gram per °C | J/(g·°C) | 1000 J/(kg·K) |
| Calorie (IT) per Gram per °C | cal/(g·°C) | 4186.8 J/(kg·K) |
| Kilocalorie (IT) per Kilogram per °C | kcal/(kg·°C) | 4186.8 J/(kg·K) |
| Btu (IT) per Pound per °F | Btu/(lb·°F) | 4186.8 J/(kg·K) |
| Btu (IT) per Pound per °C | Btu/(lb·°C) | 2326 J/(kg·K) |
| Kilogram-force Meter per Kilogram per Kelvin | kgf·m/(kg·K) | 9.80665 J/(kg·K) |
| Pound-force Foot per Pound per °R | lbf·ft/(lb·°R) | 5.3803205 J/(kg·K) |
About These Parameters
- Value
- The specific heat capacity value you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The unit your input value is currently measured in — a chemistry reference's cal/(g·°C), or a US engineering datasheet's Btu/(lb·°F).
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Specific Heat Capacity Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to joules per kilogram per kelvin. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Kilojoule per Kilogram per Kelvin → Kilocalorie (IT) per Kilogram per °C: multiply by 0.2388459. For example, 1 kJ/(kg·K) × 0.2388459 = 0.2388459 kcal/(kg·°C).
Q = mcΔT
Specific heat capacity (c) is the key figure in the fundamental heat-energy equation Q = mcΔT — the heat energy Q needed equals mass (m) times specific heat capacity (c) times the temperature change (ΔT). This is the formula behind everything from calculating how much energy it takes to boil a kettle of water to sizing an industrial heat exchanger.
Why Water Is the Reference Point
Water has an unusually high specific heat capacity (about 4,186 J/(kg·K), or almost exactly 1 cal/(g·°C) by the calorie's original definition) compared to most other everyday materials — metals typically sit between 100 and 900 J/(kg·K). This is why large bodies of water moderate coastal climates, why water is used as a coolant in engines and power plants, and why the calorie and Btu, both originally water-based reference units, come out so close to a value of 1 on this page's water-referenced units.
Example
A specific heat capacity of 1 kJ/(kg·K) equals 0.2388459 kcal/(kg·°C). For scale, water's specific heat capacity is about 4,186 J/(kg·K) (1 cal/(g·°C)), while aluminum's is about 897 J/(kg·K) — meaning it takes roughly 4.7 times more energy to heat a kilogram of water by one degree than the same mass of aluminum.
Frequently Asked Questions
How many Kilocalories (IT) per Kilogram per °C are in 1 Kilojoule per Kilogram per Kelvin?
1 Kilojoule per Kilogram per Kelvin (kJ/(kg·K)) equals exactly 0.2388459 Kilocalories (IT) per Kilogram per °C (kcal/(kg·°C)).
Why is water's specific heat capacity almost exactly 1 cal/(g·°C)?
It's not a coincidence — the calorie was originally DEFINED in the 19th century as the energy needed to raise one gram of water by one degree Celsius. The modern International Table calorie is now fixed to a precise joule value rather than redefined by experiment each time, which is why the figure comes out extremely close to, but not perfectly, 1.
What's the difference between specific heat capacity and heat capacity?
Specific heat capacity is a per-unit-mass property of a substance (energy per kg per degree), independent of how much of the substance you have. Heat capacity (without "specific") is the total energy needed to heat a particular object or quantity by one degree, found by multiplying specific heat capacity by the actual mass involved.
How accurate are these conversions?
Every conversion factor used here is the exact, internationally recognized relationship between the underlying energy, mass, and temperature units (e.g. 1 cal (IT) = exactly 4.1868 joules) — results are limited only by floating-point display precision, not by rounded conversion constants.