Convert Foot-pounds per Second to Horsepower
Foot-pound per Second (ft·lb/s) to Horsepower (mechanical) (hp) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 ft·lb/s = 0.0018181818 hp
1 Foot-pound per Second = 0.0018181818 Horsepower
1 Horsepower (mechanical) = 550 Foot-pounds per Second
1 ft·lb/s in every supported unit
Conversion chart: Foot-pound per Second to Horsepower
Conversion table
| Foot-pound per Second (ft·lb/s) | Horsepower (mechanical) (hp) |
|---|---|
| 0.01 ft·lb/s | 1.81818E-05 hp |
| 0.1 ft·lb/s | 0.00018181818 hp |
| 1 ft·lb/s | 0.0018181818 hp |
| 2 ft·lb/s | 0.0036363636 hp |
| 3 ft·lb/s | 0.0054545455 hp |
| 5 ft·lb/s | 0.0090909091 hp |
| 10 ft·lb/s | 0.018181818 hp |
| 20 ft·lb/s | 0.036363636 hp |
| 50 ft·lb/s | 0.090909091 hp |
| 100 ft·lb/s | 0.18181818 hp |
| 1000 ft·lb/s | 1.8181818 hp |
Foot-pound per Second (ft·lb/s)
Definition: The rate of doing one foot-pound of mechanical work (moving a one-pound force through a distance of one foot) every second, equal to about 1.356 watts.
History: An imperial engineering unit that predates the watt; James Watt used exactly this unit to originally define horsepower, fixing one horsepower at 550 foot-pounds per second based on his observations of a working mill horse.
Current use: Occasionally used in mechanical and structural engineering calculations in the US where forces and distances are already expressed in pounds and feet, though largely superseded by horsepower and watts for everyday use.
Horsepower (mechanical) (hp)
Definition: Defined as exactly 550 foot-pounds of work per second, equivalent to about 745.7 watts.
History: Devised by James Watt in the 1780s as a marketing comparison, so that customers evaluating his steam engines could judge their output against the mill horses the engines were replacing; he calculated the figure by observing how much work a strong horse could sustain turning a mill.
Current use: Still the standard unit for engine and motor power ratings in the United States and United Kingdom, especially for cars, trucks, motorcycles, and lawn equipment.
Supported Units
| Unit | Symbol | In Watts |
|---|---|---|
| Milliwatt | mW | 0.001 W |
| Watt | W | 1 W |
| Kilowatt | kW | 1000 W |
| Megawatt | MW | 1000000 W |
| Gigawatt | GW | 1E+09 W |
| Horsepower (mechanical) | hp | 745.69987 W |
| Horsepower (metric) | PS | 735.49875 W |
| BTU per Hour | BTU/h | 0.29307107 W |
| Foot-pound per Second | ft·lb/s | 1.3558179 W |
| Calorie per Second | cal/s | 4.1868 W |
About These Parameters
- Value
- The number you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The unit your input value is currently measured in.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Power Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the watt. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Foot-pound per Second → Horsepower (mechanical): multiply by 0.0018181818. For example, 1 ft·lb/s × 0.0018181818 = 0.0018181818 hp.
Mechanical vs. Metric Horsepower
The two horsepower units on this page look almost identical but are not quite the same: mechanical horsepower (hp) is defined as exactly 550 foot-pounds of work per second (about 745.7 W) and is the standard for cars and engines in the US and UK, while metric horsepower (PS, from the German Pferdestärke) is defined as the power to lift 75 kilograms one meter per second (about 735.5 W) and is used across continental Europe, Japan, and much of Asia. The difference is small — about 1.4% — but it means a car advertised as "300 PS" in Germany produces slightly less power than a car advertised as "300 hp" in the US, even though the numbers look the same.
How James Watt Defined Horsepower
In the 1780s, engineer James Watt needed a way to convince mill owners that his improved steam engines could outperform the horses they already used to turn grinding wheels. He observed a strong horse turning a mill and calculated it could sustain roughly 33,000 foot-pounds of work per minute — equivalent to 550 foot-pounds per second — and fixed that figure as "one horsepower." The unit stuck long after steam engines and horses both gave way to electric and internal combustion power, and it remains the standard way vehicle and engine power is marketed today.
Example
1 ft·lb/s equals 0.0018181818 hp. For scale, that's about 0× the power draw of a typical microwave oven (1,000 W, or 737.56215 ft·lb/s).
Frequently Asked Questions
How many Horsepower are in 1 Foot-pound per Second?
1 Foot-pound per Second (ft·lb/s) equals exactly 0.0018181818 Horsepower (hp).
Why are there two kinds of horsepower?
Mechanical horsepower (550 ft·lb/s, about 745.7 W) was defined in Britain by James Watt in the 1780s, while metric horsepower (PS, about 735.5 W) was defined later in continental Europe using kilograms and meters instead of pounds and feet. Both describe roughly "the power of a horse," but because they were defined with different unit systems the two figures differ by about 1.4%.
How many watts is 1 horsepower?
1 mechanical horsepower equals exactly 745.6998715823 watts (about 745.7 W), while 1 metric horsepower (PS) equals exactly 735.49875 watts (about 735.5 W). Both are close to but not the same as 1 kilowatt (1,000 W).
How accurate are these conversions?
Every conversion factor used here is the exact, internationally recognized value (e.g. 1 hp = exactly 745.6998715823 W, 1 PS = exactly 735.49875 W) — results are limited only by floating-point display precision, not by rounded conversion constants.