Convert Btu (IT) per Second per Square Foot to Calories (IT) per Second per Square Centimeter
Btu (IT) per Second per Square Foot (Btu/(s·ft²)) to Calorie (IT) per Second per Square Centimeter (cal/(s·cm²)) heat flux density conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 Btu/(s·ft²) = 0.27124606 cal/(s·cm²)
1 Btu (IT) per Second per Square Foot = 0.27124606 Calories (IT) per Second per Square Centimeter
1 Calorie (IT) per Second per Square Centimeter = 3.6866895 Btu (IT) per Second per Square Foot
1 Btu/(s·ft²) in every supported unit
Conversion chart: Btu (IT) per Second per Square Foot to Calories (IT) per Second per Square Centimeter
Conversion table
| Btu (IT) per Second per Square Foot (Btu/(s·ft²)) | Calorie (IT) per Second per Square Centimeter (cal/(s·cm²)) |
|---|---|
| 0.01 Btu/(s·ft²) | 0.0027124606 cal/(s·cm²) |
| 0.1 Btu/(s·ft²) | 0.027124606 cal/(s·cm²) |
| 1 Btu/(s·ft²) | 0.27124606 cal/(s·cm²) |
| 2 Btu/(s·ft²) | 0.54249212 cal/(s·cm²) |
| 3 Btu/(s·ft²) | 0.81373818 cal/(s·cm²) |
| 5 Btu/(s·ft²) | 1.3562303 cal/(s·cm²) |
| 10 Btu/(s·ft²) | 2.7124606 cal/(s·cm²) |
| 20 Btu/(s·ft²) | 5.4249212 cal/(s·cm²) |
| 50 Btu/(s·ft²) | 13.562303 cal/(s·cm²) |
| 100 Btu/(s·ft²) | 27.124606 cal/(s·cm²) |
| 1000 Btu/(s·ft²) | 271.24606 cal/(s·cm²) |
Btu (IT) per Second per Square Foot (Btu/(s·ft²))
Definition: The same US customary heat flux concept as Btu per hour per square foot, but scaled to seconds for rapid or intense heat-transfer processes.
History: A natural time-unit variant used wherever heat-flow calculations need to match instantaneous, second-based power measurements rather than hourly building-scale rates.
Current use: Used in high-intensity US industrial process engineering, such as furnace and combustion heat-transfer calculations.
Calorie (IT) per Second per Square Centimeter (cal/(s·cm²))
Definition: A CGS-based heat flux unit combining the International Table calorie, second, and square centimeter — a classical physics and physical-chemistry combination.
History: Rooted in the CGS unit system widely used in 19th and 20th century physics and physical chemistry before SI units became the international standard.
Current use: Still found in classical thermodynamics and combustion-science literature from before SI's widespread adoption.
Supported Units
| Unit | Symbol | In W/m² |
|---|---|---|
| Watt per Square Meter | W/m² | 1 W/m² |
| Kilowatt per Square Meter | kW/m² | 1000 W/m² |
| Watt per Square Centimeter | W/cm² | 10000 W/m² |
| Watt per Square Inch | W/in² | 1550.0031 W/m² |
| Kilocalorie (IT) per Hour per Square Meter | kcal/(h·m²) | 1.163 W/m² |
| Calorie (IT) per Second per Square Centimeter | cal/(s·cm²) | 41868 W/m² |
| Btu (IT) per Hour per Square Foot | Btu/(h·ft²) | 3.1546 W/m² |
| Btu (IT) per Second per Square Foot | Btu/(s·ft²) | 11356.53 W/m² |
| Horsepower per Square Foot | hp/ft² | 8026.65 W/m² |
| Foot Pound per Minute per Square Foot | ft·lb/(min·ft²) | 0.2432 W/m² |
About These Parameters
- Value
- The heat flux density value you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The unit your input value is currently measured in — a solar spec sheet's W/m², or a US HVAC load calculation's Btu/(h·ft²).
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Heat Flux Density Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to watts per square meter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Btu (IT) per Second per Square Foot → Calorie (IT) per Second per Square Centimeter: multiply by 0.27124606. For example, 1 Btu/(s·ft²) × 0.27124606 = 0.27124606 cal/(s·cm²).
Solar Irradiance
"1,000 W/m²" is the standard reference solar irradiance used to rate solar panels under laboratory "Standard Test Conditions" — roughly what a clear, midday sun delivers to a surface facing directly toward it. Real-world irradiance varies constantly with time of day, cloud cover, and season, which is why a panel's rated wattage (measured at that fixed 1,000 W/m² reference) rarely matches its actual output at any given moment.
Heat Flux Density vs. Heat Density
This page's units are all RATES (power per area, e.g. watts per square meter) — how fast energy is moving right now. The site's separate Heat Density Converter covers the cumulative TOTAL (energy per area, e.g. joules per square meter) — how much energy has landed altogether over some period. Multiplying a heat flux density by a duration of time gives you a heat density, the same relationship speed has to distance.
Example
A heat flux density of 1 Btu/(s·ft²) equals 0.27124606 cal/(s·cm²). For scale, peak midday solar irradiance is around 1,000 W/m² (about 317 Btu/(h·ft²)), while a typical well-insulated wall might lose heat at only a few W/m² on a cold day.
Frequently Asked Questions
How many Calories (IT) per Second per Square Centimeter are in 1 Btu (IT) per Second per Square Foot?
1 Btu (IT) per Second per Square Foot (Btu/(s·ft²)) equals exactly 0.27124606 Calories (IT) per Second per Square Centimeter (cal/(s·cm²)).
Why does this page have so many units compared to other converters?
Heat flux density is used across an unusually wide range of fields — solar engineering, HVAC, laser physics, industrial heating, and classical thermodynamics — each of which historically settled on its own preferred combination of energy, time, and area units, so this page collects the most commonly seen ones from each.
What's a normal heat flux density value for solar panels?
Solar panels are rated at a standard 1,000 W/m² reference irradiance, but real-world sunlight typically ranges from near 0 (night, heavy cloud) up to around 1,000-1,100 W/m² at clear-sky, high-sun conditions, varying with latitude, season, and time of day.
How accurate are these conversions?
Every conversion factor used here is the exact, internationally recognized relationship between the underlying power, energy, and area units — results are limited only by floating-point display precision, not by rounded conversion constants.