Convert Abmhos/Meter to Mhos/Centimeter
Abmho/Meter (abmho/m) to Mho/Centimeter (mho/cm) electric conductivity conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 abmho/m = 10000000 mho/cm
1 Abmho/Meter = 10000000 Mhos/Centimeter
1 Mho/Centimeter = 1E-07 Abmhos/Meter
1 abmho/m in every supported unit
Conversion chart: Abmho/Meter to Mhos/Centimeter
Conversion table
| Abmho/Meter (abmho/m) | Mho/Centimeter (mho/cm) |
|---|---|
| 0.01 abmho/m | 100000 mho/cm |
| 0.1 abmho/m | 1000000 mho/cm |
| 1 abmho/m | 10000000 mho/cm |
| 2 abmho/m | 20000000 mho/cm |
| 3 abmho/m | 30000000 mho/cm |
| 5 abmho/m | 50000000 mho/cm |
| 10 abmho/m | 1E+08 mho/cm |
| 20 abmho/m | 2E+08 mho/cm |
| 50 abmho/m | 5E+08 mho/cm |
| 100 abmho/m | 1E+09 mho/cm |
| 1000 abmho/m | 1E+10 mho/cm |
Abmho/Meter (abmho/m)
Definition: A conductivity unit built from the abmho, the CGS-EMU (electromagnetic) system's unit of conductance, divided by length in meters; since one abmho equals one billion siemens, one abmho/meter equals one billion siemens per meter.
History: It emerged alongside the rest of the 19th-century CGS-EMU system, which 19th- and early 20th-century physicists used for electromagnetic theory and calculations before the SI became the international standard.
Current use: Essentially confined to historical physics literature and specialized electromagnetic-theory work that still frames calculations in native CGS-EMU units rather than SI.
Mho/Centimeter (mho/cm)
Definition: A conductivity unit built from the non-SI mho and the smaller centimeter length scale, commonly abbreviated mho/cm; because it uses a shorter reference length than the meter, one mho/cm equals 100 siemens/meter.
History: Its use traces to laboratory practice — bench-scale conductivity cells and probes are typically sized in centimeters, so 19th- and 20th-century chemists and soil scientists naturally reported conductivity per centimeter rather than per meter.
Current use: Still commonly seen in water-quality, electrochemistry, and soil-salinity testing (often today as its SI-prefixed cousin microsiemens/centimeter), since laboratory conductivity meters and probes remain centimeter-scale instruments.
Supported Units
| Unit | Symbol | In Siemens/Meter |
|---|---|---|
| Siemens/Meter | S/m | 1 S/m |
| Picosiemens/Meter | pS/m | 1E-12 S/m |
| Mho/Meter | mho/m | 1 S/m |
| Mho/Centimeter | mho/cm | 100 S/m |
| Abmho/Meter | abmho/m | 1E+09 S/m |
| Abmho/Centimeter | abmho/cm | 1E+11 S/m |
| Statmho/Meter | stmho/m | 1.11265E-12 S/m |
| Statmho/Centimeter | stmho/cm | 1.11265E-10 S/m |
About These Parameters
- Value
- The conductivity value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from a picosiemens/meter-level insulator figure to a highly conductive metal or electrolyte's siemens/meter rating.
- From Unit
- The unit your input value is currently measured in — a modern material spec's siemens/meter (S/m) rating, or a legacy geophysical or water-quality figure quoted in mho/meter or mho/centimeter.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly, which is handy when translating an older mho-based reading into the modern siemens/meter or vice versa.
How Electric Conductivity Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to siemens/meter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Abmho/Meter → Mho/Centimeter: multiply by 10000000. For example, 1 abmho/m × 10000000 = 10000000 mho/cm.
Conductivity vs. Conductance
It is easy to confuse conductivity with plain conductance, but the two describe different things. Conductance (siemens) is a property of one specific object — a particular wire, resistor, or component — and depends on that object's length and cross-sectional area as well as what it's made of. Conductivity (siemens per meter) strips out the geometry entirely and describes only the material itself: copper has a certain conductivity regardless of whether it's shaped into a thin wire or a thick busbar, even though the two objects would have very different conductance values. Conductivity is what lets engineers and scientists compare materials directly, and is also the reciprocal of resistivity (ohm-meters), the more commonly tabulated material property.
Per-Meter vs. Per-Centimeter
Several units on this page come in both per-meter and per-centimeter variants — mho/meter and mho/centimeter, abmho/meter and abmho/centimeter, statmho/meter and statmho/centimeter — because laboratory-scale conductivity probes and cells are typically built and calibrated at the centimeter scale, while the SI unit uses the meter as its base length. Since conductivity scales inversely with the length unit used, a per-centimeter value is always 100 times larger than the equivalent per-meter value expressed in the same underlying conductance unit — for example, 1 mho/cm equals 100 S/m, not 0.01 S/m, because using the smaller centimeter as the reference length makes each unit of conductivity "worth more" per meter of actual material.
Example
A conductivity of 1 abmho/m equals 10000000 mho/cm. For scale, copper — one of the best common electrical conductors — has a conductivity around 59.6 million siemens/meter, seawater is typically around 4-5 siemens/meter, and dry soil or high-purity insulating materials can fall below a microsiemens per meter.
Frequently Asked Questions
How many Mhos/Centimeter are in 1 Abmho/Meter?
1 Abmho/Meter (abmho/m) equals exactly 10000000 Mhos/Centimeter (mho/cm).
What is the difference between electric conductivity and electric conductance?
Conductivity (siemens per meter) is an intrinsic material property, independent of an object's size or shape — it's what you'd look up to compare how well copper, seawater, or soil conducts electricity. Conductance (siemens) describes one specific object's ability to conduct current and depends on that object's length and cross-sectional area. Use this converter for the material property; use the companion Electric Conductance Converter for a specific component or object.
Is mho/meter the same as siemens/meter?
Yes — mho/meter and siemens/meter are numerically identical (1 mho/m = 1 S/m). "Mho" was the informal name for the unit of conductance before the siemens was standardized in 1935, and per-length "mho" units still appear in older geophysical and electrochemical literature.
Why does mho/centimeter equal 100 siemens/meter instead of a smaller number?
It comes down to how the unit is built: mho/centimeter uses centimeters, a smaller length unit, in its denominator. Since there are 100 centimeters in a meter, expressing conductivity "per centimeter" packs the same physical conductivity into a shorter reference length, which multiplies the numeric value by 100 when converted to the meter-based siemens/meter — it is not a different physical quantity, just a different length scale.
What are abmho/meter and statmho/meter used for today?
Abmho/meter (from the CGS-EMU system) and statmho/meter (from the CGS-ESU system) are 19th-century conductivity units that predate the SI. They're almost never used in modern engineering, appearing mainly in historical physics literature and theoretical work that still frames electromagnetic calculations in native CGS units.