Convert Pounds per Gallon (US) to Pounds per Cubic Foot
Pound per Gallon (US) (lb/gal) to Pound per Cubic Foot (lb/ft³) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 lb/gal = 7.4805195 lb/ft³
1 Pound per Gallon (US) = 7.4805195 Pounds per Cubic Foot
1 Pound per Cubic Foot = 0.13368056 Pounds per Gallon (US)
1 lb/gal in every supported unit
Conversion chart: Pound per Gallon (US) to Pounds per Cubic Foot
Conversion table
| Pound per Gallon (US) (lb/gal) | Pound per Cubic Foot (lb/ft³) |
|---|---|
| 0.01 lb/gal | 0.074805195 lb/ft³ |
| 0.1 lb/gal | 0.74805195 lb/ft³ |
| 1 lb/gal | 7.4805195 lb/ft³ |
| 2 lb/gal | 14.961039 lb/ft³ |
| 3 lb/gal | 22.441558 lb/ft³ |
| 5 lb/gal | 37.402597 lb/ft³ |
| 10 lb/gal | 74.805195 lb/ft³ |
| 20 lb/gal | 149.61039 lb/ft³ |
| 50 lb/gal | 374.02597 lb/ft³ |
| 100 lb/gal | 748.05195 lb/ft³ |
| 1000 lb/gal | 7480.5195 lb/ft³ |
Pound per Gallon (US) (lb/gal)
Definition: A US customary density unit describing how many pounds of mass are contained in one US gallon of volume.
History: Combines the pound and the US liquid gallon, giving American fuel, chemical, and beverage industries a density unit matching how liquids are commonly bought and sold by the gallon.
Current use: Widely used in the US petroleum and trucking industries to calculate the weight of fuel, water, or bulk liquid cargo loaded by the gallon.
Pound per Cubic Foot (lb/ft³)
Definition: A US customary density unit describing how many pounds of mass are packed into one cubic foot of volume.
History: Built from the pound and cubic foot, both foundational US customary units, this became the standard density unit in American construction and materials engineering as buildings and materials were specified in feet and pounds.
Current use: The everyday density unit in US construction, geotechnical engineering, and materials specification — used for concrete, soil, insulation, and lumber density ratings.
Supported Units
| Unit | Symbol | In Kilograms per Cubic Meter |
|---|---|---|
| Kilogram per Cubic Meter | kg/m³ | 1 kg/m³ |
| Gram per Cubic Centimeter | g/cm³ | 1000 kg/m³ |
| Kilogram per Liter | kg/L | 1000 kg/m³ |
| Gram per Liter | g/L | 1 kg/m³ |
| Ounce per Cubic Inch | oz/in³ | 1729.994 kg/m³ |
| Ounce per Gallon (US) | oz/gal | 7.489152 kg/m³ |
| Pound per Cubic Foot | lb/ft³ | 16.018463 kg/m³ |
| Pound per Cubic Inch | lb/in³ | 27679.905 kg/m³ |
| Pound per Gallon (US) | lb/gal | 119.82643 kg/m³ |
| Slug per Cubic Foot | slug/ft³ | 515.37882 kg/m³ |
About These Parameters
- Value
- The density value you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The density unit your input value is currently measured in — for example, pounds per cubic foot on a US construction spec or grams per cubic centimeter on a chemistry lab report.
- To Unit
- The density unit you want the result converted into. Use the swap button to flip From and To instantly.
How Density Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the kilogram per cubic meter. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Pound per Gallon (US) → Pound per Cubic Foot: multiply by 7.4805195. For example, 1 lb/gal × 7.4805195 = 7.4805195 lb/ft³.
Density = Mass ÷ Volume
Density is simply mass divided by volume (ρ = m/V), which is why every density unit is really a mass unit paired with a volume unit — kilograms per cubic meter, pounds per cubic foot, grams per cubic centimeter, and so on. Two objects of the same size can have wildly different masses depending on what they're made of: a cubic meter of water has a mass of about 1,000 kg, while a cubic meter of steel has a mass of roughly 7,850 kg, which is exactly why density is the property engineers check when comparing materials by weight rather than volume alone.
Why the Slug Exists
The slug per cubic foot looks unusual next to the more familiar pound-based density units because it solves a specific problem: the everyday "pound" is ambiguous, sometimes meaning mass and sometimes meaning force (weight). The slug is defined purely as a unit of mass, chosen so that Newton's second law (force = mass × acceleration) works cleanly within the foot-pound-second system without an extra conversion constant — which is why US aerospace and fluid dynamics calculations, particularly air density in aerodynamics formulas, use slugs per cubic foot rather than the more everyday pounds per cubic foot.
Example
1 lb/gal equals 7.4805195 lb/ft³. For scale, that's about 0.12× the density of fresh water at 4°C (1,000 kg/m³, or 8.3454045 lb/gal) — a useful everyday reference point, since anything less dense than water floats and anything denser sinks.
Frequently Asked Questions
How many Pounds per Cubic Foot are in 1 Pound per Gallon (US)?
1 Pound per Gallon (US) (lb/gal) equals exactly 7.4805195 Pounds per Cubic Foot (lb/ft³).
Why does water's density matter as a reference point?
Fresh water at 4°C has a density of almost exactly 1,000 kg/m³ (1 g/cm³), which is why it's the standard reference for specific gravity — a material's density divided by water's density. Anything with a specific gravity below 1 floats in water; anything above 1 sinks, which is a quick, intuitive way engineers and scientists compare material densities.
What's the difference between pounds per cubic foot and slugs per cubic foot?
Pounds per cubic foot uses the everyday pound, which in this context typically means pound-mass. Slugs per cubic foot uses the slug, a unit defined purely as mass so that force (in pound-force) equals mass (in slugs) times acceleration (in ft/s²) without any extra conversion factor — this matters in aerodynamics and fluid dynamics formulas where unit consistency with pound-force avoids introducing gravitational constants.
How accurate are these conversions?
Every conversion factor used here is the exact, internationally recognized value (e.g. 1 lb/ft³ = exactly 16.01846337 kg/m³, derived from the internationally standardized pound and foot) — results are limited only by floating-point display precision, not by rounded conversion constants.