Convert Megabytes to Kilobytes
Megabyte (MB) to Kilobyte (KB) unit conversion — enter any value below to get an instant result, or use the table for common values.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
1 MB = 1000 KB
1 Megabyte = 1000 Kilobytes
1 Kilobyte = 0.001 Megabytes
1 MB in every supported unit
Conversion chart: Megabyte to Kilobytes
Conversion table
| Megabyte (MB) | Kilobyte (KB) |
|---|---|
| 0.01 MB | 10 KB |
| 0.1 MB | 100 KB |
| 1 MB | 1000 KB |
| 2 MB | 2000 KB |
| 3 MB | 3000 KB |
| 5 MB | 5000 KB |
| 10 MB | 10000 KB |
| 20 MB | 20000 KB |
| 50 MB | 50000 KB |
| 100 MB | 100000 KB |
| 1000 MB | 1000000 KB |
Megabyte (MB)
Definition: Equal to 1,000,000 bytes (10^6) under the decimal SI standard; historically also used to mean 1,048,576 bytes (2^20) in binary computing contexts.
History: Came into common use during the 1970s and 80s as storage capacities grew past the kilobyte scale, inheriting the same decimal-versus-binary ambiguity that already existed for the kilobyte.
Current use: This is the classic source of the "missing space" confusion: storage manufacturers advertise capacity using decimal megabytes and gigabytes (1 MB = 1,000,000 bytes), while Windows' File Explorer has historically displayed file and drive sizes using binary math — labeling 1,048,576 bytes as "1 MB" — which makes a purchased drive appear to have less space than advertised even though no storage is actually missing.
Kilobyte (KB)
Definition: Officially 1,000 bytes under the SI decimal standard used by storage manufacturers and standards bodies, though the same abbreviation was historically also used to mean 1,024 bytes.
History: The "kilo-" prefix was borrowed from the metric system in the 1960s and 70s, but because computer memory is naturally organized in powers of two, engineers commonly repurposed it to mean 1,024 bytes — the closest power of two to 1,000 — creating decades of ambiguity between the decimal and binary meanings.
Current use: Storage manufacturers and networking standards use the strict decimal definition (1 KB = 1,000 bytes), while many operating systems have historically displayed sizes using binary math instead — this is a major reason a hard drive advertised as a round number of KB, MB, or GB can appear smaller once plugged in.
Supported Units
| Unit | Symbol | In Bytes |
|---|---|---|
| Bit | bit | 0.125 B |
| Byte | B | 1 B |
| Kilobyte | KB | 1000 B |
| Megabyte | MB | 1000000 B |
| Gigabyte | GB | 1E+09 B |
| Terabyte | TB | 1E+12 B |
| Kibibyte | KiB | 1024 B |
| Mebibyte | MiB | 1048576 B |
| Gibibyte | GiB | 1.07374E+09 B |
| Tebibyte | TiB | 1.09951E+12 B |
About These Parameters
- Value
- The number you want to convert, expressed in the "From" unit. Accepts decimals.
- From Unit
- The unit your input value is currently measured in.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Data Storage Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to the byte. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Megabyte → Kilobyte: multiply by 1000. For example, 1 MB × 1000 = 1000 KB.
Decimal (1000) vs. Binary (1024)
Data storage is the one measurement family where the same prefix means two different things. Storage manufacturers, and the SI and IEC standards bodies, define a kilobyte as exactly 1,000 bytes, a megabyte as 1,000,000 bytes, and so on — clean powers of ten, matching every other metric prefix. But because computer memory is physically organized in powers of two, operating systems have long used the same labels — "KB," "MB," "GB" — to mean powers of 1,024 instead: 1,024 bytes, 1,048,576 bytes, and so on. This converter treats the decimal units (kilobyte, megabyte, gigabyte, terabyte) and the binary units (kibibyte, mebibyte, gibibyte, tebibyte) as distinct, precisely defined units so there is no ambiguity — 1 kilobyte is always 1,000 bytes, and 1 kibibyte is always 1,024 bytes.
This is exactly why a drive advertised as "500 GB" (500,000,000,000 bytes under the manufacturer's decimal definition) shows up as roughly "465 GB" in Windows' File Explorer — Windows is dividing that same byte count using binary gibibyte math (2^30 bytes per unit) while still displaying the label "GB" instead of the technically correct "GiB." No storage is missing; two different definitions of the same word are being compared.
Bits vs. Bytes: Why Network Speeds Look Slower Than They Are
Internet and Wi-Fi speeds are almost always advertised in bits per second (Mbps or Gbps), while file sizes and download progress bars are shown in bytes (MB or GB) — and there are 8 bits in a byte. A connection advertised as "100 Mbps" therefore has a real-world maximum download speed of about 100 ÷ 8 = 12.5 megabytes per second, not 100 megabytes per second. This single unit mismatch is one of the most common sources of confusion in consumer networking, and it is worth double-checking whenever comparing an advertised connection speed to an actual download time.
Example
1 MB equals 1000 KB. For scale, that's about 0.2× a typical high-resolution smartphone photo (5 MB, or 5 MB).
Frequently Asked Questions
How many Kilobytes are in 1 Megabyte?
1 Megabyte (MB) equals exactly 1000 Kilobytes (KB).
Why does my new hard drive show less space than advertised?
Manufacturers advertise capacity using decimal gigabytes (1 GB = 1,000,000,000 bytes), while your operating system typically calculates and displays free space using binary gibibytes (1 GiB = 1,073,741,824 bytes) but still labels it "GB." The byte count is identical — only the unit definition used to display it differs, so a 500 GB drive reads as about 465 "GB" in Windows.
What is the difference between a bit and a byte?
A bit is a single binary digit (0 or 1); a byte is a group of 8 bits and is the smallest unit typically used to represent a character of data. Network and internet speeds are conventionally measured in bits per second, while file and storage sizes are measured in bytes, so an "8 Mbps" connection transfers roughly 1 megabyte per second at best.
Should I use KB/MB/GB or KiB/MiB/GiB?
Use the decimal units (KB, MB, GB, TB) when matching a manufacturer's advertised storage capacity or a network speed. Use the binary units (KiB, MiB, GiB, TiB) when you need the exact power-of-two value a computer uses internally, such as memory addressing or precise free-space reporting — this converter supports both so you can convert accurately between either system.