Illumination Converter
Convert between illuminance units — lux, meter-candles, foot-candles, phot, flame phot, nox, and more.
Results from this calculator are estimates provided for general informational purposes only, based on formulas, rates, and standards commonly accepted as of 2026. Figures may differ slightly from other calculators or professional sources due to rounding methods, differing assumptions, or regional regulations, and rules may change over time. Always consult a qualified professional — such as a financial advisor, healthcare provider, or other relevant specialist — before making decisions based on these results.
Result
500 lx = 46.45152 fc
1 Lux = 0.09290304 Foot-candles
1 Foot-candle = 10.76391 Lux
500 lx in every supported unit
What is an Illumination Converter?
Illuminance — often just called "illumination" — is the amount of light falling on a surface per unit area. It's a different quantity from luminance, which describes how bright a surface itself appears to an observer, and from luminous intensity, which describes the raw light output of the source itself regardless of distance or surface. Illuminance specifically answers "how much light is landing here," which is why it's the quantity that photography light meters, workplace lighting standards, and plant-growth light requirements are all built around.
This tool is used across photography and cinematography (exposure metering), architectural and office lighting design (recommended lux levels vary by room type — a hallway needs far less light than a surgical operating table), horticulture (grow-light specifications for different plant stages), and civil engineering (road and street lighting design standards). Because illuminance has been measured in metric lux, US customary foot-candles, and older CGS-system units like the phot across different eras and industries, a converter that ties them all to a common base is essential for comparing figures across countries, codes, and disciplines. Every unit below is defined relative to the SI base unit, lux, so any two illuminance units can be converted directly and consistently.
Conversion chart: Lux to Foot-candles
Conversion table
| Lux (lx) | Foot-candle (fc) |
|---|---|
| 0.01 lx | 0.0009290304 fc |
| 0.1 lx | 0.009290304 fc |
| 1 lx | 0.09290304 fc |
| 2 lx | 0.18580608 fc |
| 3 lx | 0.27870912 fc |
| 5 lx | 0.4645152 fc |
| 10 lx | 0.9290304 fc |
| 20 lx | 1.8580608 fc |
| 50 lx | 4.645152 fc |
| 100 lx | 9.290304 fc |
| 1000 lx | 92.90304 fc |
Supported Units
| Unit | Symbol | In Lux |
|---|---|---|
| Lux | lx | 1 lx |
| Meter-candle | m·c | 1 lx |
| Centimeter-candle | cm·c | 10000 lx |
| Foot-candle | fc | 10.76391 lx |
| Flame Phot | ph (flame) | 43.055642 lx |
| Phot | ph | 10000 lx |
| Nox | — | 0.001 lx |
| Candela Steradian/Square Meter | cd·sr/m² | 1 lx |
| Lumen/Square Meter | lm/m² | 1 lx |
| Lumen/Square Centimeter | lm/cm² | 10000 lx |
| Lumen/Square Foot | lm/ft² | 10.76391 lx |
| Watt/Square Centimeter (at 555 nm) | W/cm² | 6830000 lx |
About These Parameters
- Value
- The illuminance value you want to convert, expressed in the "From" unit. Accepts decimals, and can represent anything from faint starlight to bright studio lighting.
- From Unit
- The unit your input value is currently measured in — a light meter's lux reading, a lighting code's foot-candle requirement, or a scientific instrument's phot or nox figure.
- To Unit
- The unit you want the result converted into. Use the swap button to flip From and To instantly.
How Illumination Conversion Works
The Formula
Every unit here is defined by a fixed multiplier relative to lux. To convert a value from one unit to another:
result = value × (factor of "From" unit ÷ factor of "To" unit)
For Lux → Foot-candle: multiply by 0.09290304. For example, 500 lx × 0.09290304 = 46.45152 fc.
Lux vs. Foot-candles
Lux and foot-candles are the metric and US customary measures of the same underlying idea — luminous flux landing on a surface — and the divide between them tracks the broader metric/imperial split. One foot-candle equals about 10.76 lux, because a square foot is much smaller than a square meter. Most of the world specifies lighting requirements in lux, but US architectural and lighting codes, published by bodies like the Illuminating Engineering Society (IES), still specify recommended illuminance in foot-candles, so American lighting designers routinely need to convert between the two.
Typical Illuminance Levels
For context, here's roughly where common lighting conditions fall on the lux scale:
- Direct summer sunlight: ~100,000+ lux
- Full daylight (not direct sun): ~10,000-25,000 lux
- Overcast daylight: ~1,000 lux
- Typical office lighting: ~300-500 lux
- Living room lighting: ~50-150 lux
- Twilight: ~10 lux
- Full moonlight: ~1 lux
- Starlight (clear night sky): ~0.001 lux
Example
An illuminance of 500 lx equals 46.45152 fc. For scale, a well-lit office sits around 300-500 lux (roughly 28-46 foot-candles), while overcast daylight reaches about 1,000 lux and full moonlight is only about 1 lux.
Frequently Asked Questions
What's the difference between illuminance and luminance?
Illuminance (measured in lux or foot-candles) is the amount of light falling on a surface. Luminance is how bright that surface actually appears to an observer, which depends on both the illuminance and how much light the surface reflects. A white wall and a black wall under the same illuminance have very different luminance.
How many lux is one foot-candle?
One foot-candle equals approximately 10.7639 lux. This is why US lighting specifications in foot-candles produce noticeably larger numbers than the equivalent metric lux specification for the same physical brightness.
What is a phot and why is it so large?
A phot is the CGS-system unit of illuminance, defined as one lumen per square centimeter. Because a square centimeter is 10,000 times smaller than a square meter, one phot equals 10,000 lux — an enormous illuminance rarely encountered at full scale, which is why phot values are often expressed in millphots or microphots instead.
When would I use the nox unit?
Nox (1 nox = 0.001 lux) is used for very low illuminance levels, such as those encountered in night-vision equipment specifications or low-light astronomical and research work, where ordinary lux figures would require awkward, hard-to-read decimals.
How accurate are these conversions?
Every conversion factor used here is the standard, internationally recognized relationship between the underlying illuminance units — results are limited only by floating-point display precision, not by rounded conversion constants.